1962 Chrylser Imperial Crown on 2040-cars

Auto blog

What we think we know about Chrysler's plug-in hybrid minivan, CUV

When the 2016 Town & Country comes to Chrysler dealerships, it will sport something no production minivan has ever had: a plug. That was on bit of news hidden in the massive Fiat Chrysler (FCA) product preview held in Detroit on Tuesday. All FCA would say about the minivan was that the Town & Country PHEV would get 75 MPGe. We know from the product preview slide (click to enlarge) that there are actually two plug-in hybrids coming from FCA. The minivan and a "full-size crossover," due in 2017. While that could describe the next-gen Dodge Journey, it could also be a brand new peoplemover. All FCA said officially was that it will be a "new vehicle or renewal of existing nameplate," which seems like an awful broad definition. We were curious to know more about these products, so we asked FCA spokesman Eric Mayne. Sadly, he was less than forthcoming, telling AutoblogGreen, "I can only refer you back to the presentations in which the PHEV is mentioned. If the answers aren't there, you'll have to wait." There are actually two plug-in hybrids coming from FCA. Well, sure, for actual facts we'll have to wait, but we can still speculate and look into the archives to see what plug-in vehicle technology FCA has offered in the past. Chrysler had an electric vehicle working group called ENVI that created products like an all-electric minivan for the US Postal Service (pictured). ENVI was disbanded in 2009. At the time, the company said plug-in vehicle work would continue, and since then we saw PHEV minivan and PHEV truck test programs from Chrysler and Ram. In early 2012, Chrysler started testing a small, 25-unit fleet of plug-in hybrid-electric Town & Country minivans with the city of Auburn Hills, MI, where the company is located. The $26-million demonstration project was funded in part by the US Department of Energy, which covered $10 million. The stated plan was for those minivans to each hit at least 16,800 miles over two years, but there were hiccups. In September 2012, for example, the liquid-cooled 12.1-kWh batteries from were found to overheat. Those batteries came from Electrovaya and were mated to a 3.6-liter Pentastar engine that could burn E85. Will any of this make it into the production Town & Country PHEV? No idea, but now we know where the company's coming from. FCA also has some EV experience with the Fiat 500e. Chrysler says electrification has been over-blown by the media.

Chrysler investigating complaints of vehicles with faulty power modules

Chrysler owners are hopping mad after experiencing a series of electrical gremlins in some of the company's vehicles. Issues range from mere annoyances - windows rolling down and radios turning off of their own accord - to serious safety issues, with headlights that randomly shut off at night and cars that stall and refuse to start.
The issues are being blamed on the total integrated power module, which can cost up to $1,000 for customers to replace. This, of course, has led to a hefty batch of complaints to the National Highway Traffic Safety Administration, with 240 owners expressing their displeasure so far. Another site, CarComplaints.com, has registered over 300 complaints relating to the 2010 to 2011 Jeep Grand Cherokee and Dodge Durango, alone, according to The New York Times.
Chrysler has acknowledged that it's investigating the complaints and is analyzing the faulty TIPMs, but that isn't quite enough for customers of the affected vehicles. The newspaper has snagged a few of the more harrowing tales with the electrically challenged Chrysler products, culled from the NHTSA complaints.

Fiat Chrysler working on an inline-six to replace the Pentastar V6?

Get out your Skeptics Hat for this one and keep it close by. Allpar cites "reliable sources" to write that Fiat Chrysler appears to be working on a new inline-six engine to be slotted into company products around the globe. The purported engine would be based on the 2.0-liter Global Medium Engine inline-four. Allpar first reported on the potential development in February 2017 and has filed a few updates since then, one citing "internal communications referring to a GME T6" — the "T" meaning turbocharged. It's said that some engineers have changed their online resumes to reflect their focus on the new motor. Apparently, FCA tried adding forced induction to the Pentastar V6 but didn't like the results. The new direction then turned toward a "compact straight-six." In at least one guise, the GME I-6 would come in at just under three liters in order to escape taxes on engines 3.0-liters and above in certain European markets; the 2.0-liter four-cylinder has an actual displacement of 1.995 liters. The present V6 Pentastar comes in 3.2-liter and 3.6-liter guises; a turbocharged 3.0-liter straight-six should be able to replace both as far as output. Hooking up to the company's eTorque system used on the 3.6-liter Pentastar and 5.7-liter Hemi would make things even more punchy. With the trend in truck engine downsizing, it wouldn't be crazy to see such an engine head straight to Ram. The four-cylinder GME unit serves in the Alfa Romeo Giulia and Stelvio, and Jeep Cherokee, Wrangler, and Grand Commander. The big Alfa Romeos and full-size Jeep and Ram models shouldn't have any problem with a longer inline engine. Maserati, which doesn't use the Pentastar engine, could be a candidate as well should it choose to step away from its Ferrari-developed engine cred. Speaking of Ferrari, the Italian brand is working up a new V6 based, in its words, on "a very, very particular architecture." It isn't clear where it will go or if one of the other Italian brands will get access to it, but the Allpar piece says the Ferrari V6 will be based on the core GME architecture for Maserati. Chrysler gave up its last inline-six 11 years ago when the 4.0-liter I-6 retired alongside the JK-series Jeep Wrangler. The engine format is back in vogue, and its reincarnations have received good reviews. But inline-sixes are generally longer, hence FCA's focus on a compact unit, and that could limit the purported engine's placement options.