2011 Chrysler Town & Country 76,000 Miles Minivan, Color:red, Tv's on 2040-cars

Auto blog

Junkyard Gem: 1978 Chrysler LeBaron Coupe

From the early 1930s through the middle 1970s, Chrysler used the LeBaron name (taken from a coachbuilder eventually consumed by the car company, much as Fleetwood and Ghia were absorbed by GM and Ford, respectively) on high-end Imperial models. Then, facing decreased demand for mammoth land yachts thanks to certain geopolitical events, Chrysler created a separate LeBaron model, based on the midsize platform used for the Dodge Diplomat/Plymouth Gran Fury. Production of this LeBaron began in 1977 and continued until the debut of Lee Iacocca's famous K-Car LeBarons for the 1982 model year. While you'll find the occasional Diplomat these days, the 1977-1981 LeBaron has become all but extinct. Here's a crash-victim '78 in a Denver car graveyard. Plenty of times, I'll find discarded cars of this era that seem to have moldered outside for decade after neglected decade, but this one drove to its final crash. That means that the 318-cubic-inch (5.2-liter) V8 under the hood would be a good bet to buy for another Chrysler project… but nobody seems interested, because this Malaise Era engine made only 140 horsepower when new. The base engine in the 1978 LeBaron was a 110-horse Slant-6, so at least this car had the upgrade. Sure, the Diplomat was the not-so-plush successor to the non-plush Aspen/Volare and the even-less-plush Dart/Valiant, but Chrysler installed a reasonably nice interior in the Diplomat's Chrysler-badged sibling. This one has the standard "Cortez" cloth-and-vinyl bench seat, but not the optional power windows or door locks. This one has stickers for Run-D.M.C., Public Enemy, Slayer, and MegadethÂ… plus one for the Oakland Raiders, hated rivals of Denver's local sportsball team. I'm pretty sure the car was not being driven by the original purchaser when it crashed. Believe it or not, this car was available with a four-on-the-floor manual transmission and a V8 engine. Were any sold that way? I wouldn't bet on it. Molded-in faux stitching proved very popular in American cars of the late 1970s and early 1980s. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. This advertisement may have resulted in some cannibalization of Cordoba sales, though the Pontiac Grand Prix stood as the primary rival for the '78 LeBaron coupe. Featured Gallery Junked 1978 Chrysler LeBaron Coupe View 39 Photos Auto News Chrysler Automotive History Coupe Chrysler LeBaron Junkyard Gems

Hellcrate 6.2-liter V8 delivers plug-and-play Hellcat hype to SEMA

SEMA just provided another entry for the folder marked "What A Time To Be Alive," with Mopar's announcement of the "Hellcrate" 6.2-liter supercharged Crate HEMI engine. Enthusiasts have been desperate to upgrade their vintage rides with the woozy thrills provided by Dodge's Hellcat motor, so Mopar answered. The Hellcrate engine assembly ships in plug-and-play configuration, in specially designed packaging with "Hellcrate" logos. The assembly sells separately from the Hellcrate engine kit, the kit adding a powertrain control module, power distribution center, engine wiring harness, chassis harness, accelerator pedal, ground jumper, oxygen sensors, charge air temperature sensors, and fuel pump control module. The PCM comes programmed with the production-car engine's 707 horsepower and 650 pound-feet of torque. An optional front-end accessory drive kit contributes peripherals like alternator, power steering pump, belts, and pulleys. Don't bother trying to lash up a sleeper 1997 Chrysler Sebring, though; Mopar tuned the Hellcrate for pre-1976 vehicles and manual transmissions. The engine assembly retails for an MSRP of $19,530, and the kit wants a further $2,195. Mopar didn't announce pricing for the accessory drive kit. The engine and kit come with a three-year, unlimited-mileage warranty when bought together. The Mopar Hemi Crate website will be happy to take your orders as of now. For help envisioning the possibilities, stop by Fiat Chrysler's 15,345-square-foot SEMA booth to check out the Limelight Green, Hellcrate-powered 1970 Plymouth Superbird clone worked up by Mark Worman of Velocity's " Graveyard Carz." While you're there you might as well peep Worman's encore, a 1968 Plymouth GTX stuffed with Mopar's 392 Crate HEMI in place of the original 440 big block, and the 1937 Dodge pickup that swallowed a Mopar 345 Crate HEMI. Mopar's come a long way from its original product: antifreeze products. Tomorrow it'll be Jeep's turn to ring the SEMA bells, once the noise dies down from the Mopar-jacked Wrangler Switchback, CJ66 and Jeep Shortcut. You can watch the brand's presentation online at 7:26 p.m. ET/4:26 p.m. PT. Until then, we're going to work the angles on a Hellcrate-powered Plymouth Volare. The sedan, naturally. Because we're practical. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

Nissan is optimistic about FCA partnership, but wants the right terms

BEIJING – Nissan is optimistic about partnering with a combined Renault and Fiat Chrysler (FCA), as long as it can protect the ownership of technology developed over two decades of working with Renault, a senior executive told Reuters. The executive, who declined to be identified because he is not authorized to speak to the media, said he was cautiously optimistic about the possibility of generating "synergies" by sharing Nissan's autonomous drive know-how, electrification and greenhouse-gas-scrubbing technologies for powertrains. But he said the possible $35 billion merger of Renault and FCA would not give FCA the automatic right to use those technologies, which it needs to meet stringent emissions regulations and better compete in a industry being transformed by electric vehicles. He also floated the possibility that Nissan could look at boosting its stake in Renault, or a merged Renault-FCA, to gain more say in shaping the future of the alliance. "We would go ahead with partnering or cooperating with FCA only if we can guarantee tangible benefits from sharing technologies with FCA and only if we can work out conditions that are satisfactory to us," the Yokohama-based executive said. "If Renault wants to pursue this deal, we feel we need to look seriously at supporting them," he said. The executive's comments highlight how Nissan could look to leverage its advanced technology to gain greater bargaining power with a merged Renault-FCA. Renault is Nissan's top shareholder with a 43.4% shareholding, while Nissan holds a 15% non-voting stake in the French automaker. That unequal partnership has long rankled Nissan, which is the bigger company by far. A Nissan spokesman referred Reuters to a statement issued on Monday, where Nissan Chief Executive Hiroto Saikawa said: "I believe that the potential addition of FCA as a new member of the alliance could expand the playing field for collaboration and create new opportunities for further synergies." "That said, the proposal currently being discussed is a full merger which — if realized — would significantly alter the structure of our partner Renault. This would require a fundamental review of the existing relationship between Nissan and Renault," Saikawa said, adding that Nissan would analyze and consider its "existing contractual relationships". BOOSTING STAKE?