2008 Chrysler Town & Country Touring Mini Passenger Van 4-door 3.8l on 2040-cars

Auto blog

Chrysler de Mexico to sell rebadged Mitsubishi model in shades of Colt deal

Chrysler and Mitsubishi have had a close relationship since the early '70s. Back then, they partnered up to sell the Japanese brand's models under American names as captive imports in the US. Vehicles like the Dodge Colt, Eagle Summit, and eventually the 3000GT/Stealth twins and lots of other cars and trucks became the fruits of that alliance. In fact, the two companies still maintain a good rapport, as evidenced by reports of a new deal to sell the Mitsubishi Attrage, also known the Mirage G4, in Mexico starting in November.
The Attrage is a small, four-door sedan that borrows many of the mechanical bits from the Mitsubishi Mirage hatchback. According to Automotive News, the deal allows Chrysler to sell the model in Mexico for the next five years. The deal could be a win-win for both companies. Mitsubishi gets to use more capacity at its Laem Chabang, Thailand factory where the car is made, and Chrysler gets a new vehicle for a growing market with almost zero development costs. At this time, there's no indication of the new model's name in Mexico, though.
There's also still a chance the Attrage might make it to the US market as well. The automaker showed off the sedan as the Mirage G4 at the 2014 Montreal Motor Show ahead of promised sales in small-car-friendly Canada. The Mirage hatchback was introduced to the US in a similar way, debuting in Canada first and then crossing the border. While reviews for the Mirage have been pretty atrocious, it would still be interesting to see Mitsubishi further expanding its lineup in North America.

FCA's Pentastar V6 gets more power, efficiency for 2016

Already a vital member of FCA's powertrain lineup, the 3.6-liter Pentastar V6 is receiving major efficiency improvements for 2016. Thanks to a massive amount of new tech attached to the mill, fuel economy is up six percent, and torque below 3,000 rpm jumps nearly 15 percent. The updates arrive first in the 2016 Jeep Grand Cherokee, but they should proliferate to other models eventually. At least in the Grand Cherokee, the tweaks push power up five horsepower to 295 ponies. FCA's engineers went through the Pentastar from top to bottom to eke out as much efficiency as possible. For example, there's now a two-speed variable-valve lift system that can run in low- or high-lift modes. This upgrade is responsible for 2.7-percent better economy, the company claims. A new intake manifold with longer runners and updated variable-valve times also helps boost the torque output. Further improvements come from pushing the compression ratio to 11.3:1, from 10.2:1 before. Perhaps most impressive is that despite all of the innovations, the latest Pentastar actually weighs four pounds less than the current version. Beyond the Pentastar improvements, all of the FCA US gasoline engines, except for the Viper's 8.4-liter V10, will be E15-compatible for 2016. The company says that it wants to be ready for the higher ethanol content fuel's greater use in the near future.

Fiat Chrysler working on an inline-six to replace the Pentastar V6?

Get out your Skeptics Hat for this one and keep it close by. Allpar cites "reliable sources" to write that Fiat Chrysler appears to be working on a new inline-six engine to be slotted into company products around the globe. The purported engine would be based on the 2.0-liter Global Medium Engine inline-four. Allpar first reported on the potential development in February 2017 and has filed a few updates since then, one citing "internal communications referring to a GME T6" — the "T" meaning turbocharged. It's said that some engineers have changed their online resumes to reflect their focus on the new motor. Apparently, FCA tried adding forced induction to the Pentastar V6 but didn't like the results. The new direction then turned toward a "compact straight-six." In at least one guise, the GME I-6 would come in at just under three liters in order to escape taxes on engines 3.0-liters and above in certain European markets; the 2.0-liter four-cylinder has an actual displacement of 1.995 liters. The present V6 Pentastar comes in 3.2-liter and 3.6-liter guises; a turbocharged 3.0-liter straight-six should be able to replace both as far as output. Hooking up to the company's eTorque system used on the 3.6-liter Pentastar and 5.7-liter Hemi would make things even more punchy. With the trend in truck engine downsizing, it wouldn't be crazy to see such an engine head straight to Ram. The four-cylinder GME unit serves in the Alfa Romeo Giulia and Stelvio, and Jeep Cherokee, Wrangler, and Grand Commander. The big Alfa Romeos and full-size Jeep and Ram models shouldn't have any problem with a longer inline engine. Maserati, which doesn't use the Pentastar engine, could be a candidate as well should it choose to step away from its Ferrari-developed engine cred. Speaking of Ferrari, the Italian brand is working up a new V6 based, in its words, on "a very, very particular architecture." It isn't clear where it will go or if one of the other Italian brands will get access to it, but the Allpar piece says the Ferrari V6 will be based on the core GME architecture for Maserati. Chrysler gave up its last inline-six 11 years ago when the 4.0-liter I-6 retired alongside the JK-series Jeep Wrangler. The engine format is back in vogue, and its reincarnations have received good reviews. But inline-sixes are generally longer, hence FCA's focus on a compact unit, and that could limit the purported engine's placement options.