2001 Chrysler Lxi. Duel A/c Automatic Doors. Very Clean Inside As Well As Out on 2040-cars

Auto blog

More Ram trucks recalled over tailgate issue

Almost a year ago Fiat Chrysler recalled roughly 1.6 million Ram trucks over an issue with the locking power tailgate. The actuator limiter tab for the power locking mechanism could fracture, which would permit the actuator's lock-rod control to move beyond its limits. That would pull the locking rods open, thereby allowing the tailgate to open at any time. The 2018 recall covered Ram 1500, 2500, and 3500 pickups from the 2015 to 2017 model years, with the five-foot-seven and six-foot-four beds and the power locking tailgate option. Trucks with eight-foot beds, and those with manual-locking tailgates, were excluded. The trucks with eight-foot beds have been added to the recall as of earlier this month, putting 410,351 more trucks in the pool. According to Consumer Reports, Ram redesigned the locking assembly on the other two shorter bed sizes for trucks built after August 2, 2017, which was the end of the 2017 model year. But the eight-foot long-bed trucks didn't get the redesigned part until April 2, 2018 for some reason, making all eight-foot-bed pickups from the 2015 model year to April 1, 2018 part of the recall equation. FCA says it's not aware of any accidents or injuries because of the issue. The company plans to notify owners on June 28. The paperwork filed with the National Highway Traffic Safety Administration doesn't advise owners to stop driving the trucks, but nor does it instruct owners on how to address the problem in the meantime. Sounds like bungee cords might be the go. The fix is estimated to take 30 minutes at the dealer and entails removing the tailgate cover and installing a stop block to prevent the locking actuator's pivot arm from traveling too far. FCA says it will reimburse owners for any other repairs made to address the problem. Meanwhile, owners can contact Fiat Chrysler Automobiles customer service at 800-853-1403, and refer to FCA's number for this recall, V44. The NHTSA campaign number is 19V-347. Last year's recall comes under FCA number U74, and NHTSA campaign number 18V-486. Ram's not alone on this field. The NHTSA continues to investigate the 2017 Ford Super Duty pickups for a similar issue.

Nissan didn't have much say in merger talks, but it had what FCA wanted

TOKYO — Nissan wasn't consulted on the proposed merger between its alliance partner Renault and Fiat Chrysler, but the Japanese automaker's reluctance to go along may have helped bring about the surprise collapse of the talks. While Nissan Motor Co. had a weaker bargaining position from the start, with its financial performance crumbling after the arrest last year of its star executive Carlos Ghosn, it still had as its crown jewel the technology of electric vehicles and hybrids that Fiat Chrysler wanted. The board of Renault, meeting Thursday, didn't get as far as voting on the proposal, announced last week, which would have created the world's third biggest automaker, trailing only Volkswagen AG of Germany and Japan's Toyota Motor Corp. When the French government, Renault's top shareholder with a 15% stake, asked for more time to convince Nissan, Fiat Chrysler Chairman John Elkann abruptly withdrew the offer. Although analysts say reviving the talks isn't out of the question, they say trust among the players appears to have been broken. "The other companies made the mistake of underestimating Nissan's determination to say, 'No,' " said Katsuya Takeuchi, senior analyst at Mitsubishi UFJ Morgan Stanley Securities in Tokyo. The Note, an electric car with a small gas engine to charge its battery, was Japan's No. 1 selling car, the first time in 50 years that a Nissan beat Toyota and Honda. Renault and Fiat Chrysler highlighted possible synergies that come from sharing parts and research costs as the benefits of the merger. But what Fiat Chrysler lacks and really wanted was what's called in the industry "electrification technology," Takeuchi said. With emissions regulations getting stricter around the world, having such technology is crucial. Yokohama-based Nissan makes the world's best-selling electric car Leaf. Its Note, an electric car equipped with a small gas engine to charge its battery, was Japan's No. 1 selling car for the fiscal year through March, the first time in 50 years that a Nissan model beat Toyota and Honda Motor Co. for that title. Nissan is also a leader in autonomous-driving technology, another area all the automakers are trying to innovate. "Although Nissan had no say, its cautionary stance on the merger ended up being very meaningful," Takeuchi said.

Plymouth Belmont: Running, driving, Virgil Exner-owned concept car could be yours

Concept cars are such bittersweet things. They're often gorgeous and exciting, but all too often they never see production in even the most watered-down forms. And even then, the beautiful shapes aren't usually driveable. But in the case of this 1954 Plymouth Belmont concept, it is drivable, and it could be yours. This curvaceous roadster, which appeared at the 1954 New York Auto Show and was owned at one time by Chrysler styling master Virgil Exner, is driveable because under the long hood is a 241-cubic-inch V8 coupled to a three-speed automatic transmission. It's not a speed demon with just 157 horsepower, but that's OK, because you don't want to accelerate so fast you deprive the world of the Belmont's beautiful body. For a design from the 1950s, it's impressively restrained and elegant. The flanks are completely smooth and flowing, the only interruptions being the shut lines to the small doors. There aren't even door handles on the sides. Chrome and polished stainless accents are left only to the lights, bumpers, grille, and a slender line that runs along the peak of the fenders from stem to stern. Even the fins are small and subtle (relatively). Even the interior is simple and clean. The dashboard is made of machine-turned metal with white on black analog dials and compass-like needles. Everything else is wrapped in a very light beige leather (probably vinyl), and again, polished surfaces are kept to a minimum. Of course the other great part is that this concept is something you could own because it will go for auction at Barrett-Jackson's Scottsdale auction. There's no publicly available estimate for how much money the car may bring, but it does have a reserve, so be prepared with a little extra cash even if you have the winning bid. The auction runs from Jan. 13 to Jan. 21. Related Video: Image Credit: Barrett-Jackson Chrysler Auctions Convertible Concept Cars Classics