2009 Chrysler Sebring Limited Heated Leather Only 68k Texas Direct Auto on 2040-cars

Auto blog

All hail the Hellephant, Mopar's 1,000-horsepower crate engine

It's shocking to say this, but the all-powerful Dodge Demon looks weak now that Mopar has unleashed the Hellephant. This crate motor makes 1,000 horsepower and 950 pound-feet of torque, and its name is a combination of the nickname for the old 426-cubic-inch Hemi V8 and, obviously, the Hellcat. This monster is a 426-cubic-inch version of the current third-generation Hemi V8 topped by a supercharger similar to what the Hellcat line packs. Everything is cranked up to — or perhaps, past — 11. The engine block is made of aluminum and weighs 100 pounds less than the equivalent iron block. All of the internals are forged. The stroke and bore have been increased. The supercharger produces 15 pounds of boost and displaces 3 liters; more than the 2.7-liter blower on the Demon and the 2.4-liter blower on the Hellcat. And as big and powerful as it is, it will still rev to 7,000 rpm. It's a thoroughly monstrous motor, but shockingly, it won't be that difficult to live with. For one thing, Mopar will offer a complete kit to get the engine up and running, including an engine computer, wiring harness and drive-by-wire throttle. It also runs on 93-octane pump gas. That's especially amazing considering the Demon engine "only" makes 840 horsepower, and that's on race gas with 100+ octane fuel. It also has us wondering what the Hellephant could make on racing fuel. The Mopar folks did say that there's room to add more power. Pricing wasn't announced for the Hellephant engine. The Hellcat crate engine retails at $19,350 directly from Mopar, so it's safe to assume that the Hellephant will go for more. The installation kit with the computer and harness will be an extra charge of likely over $2,000, based on the Hellcat kit. The engine and the kit will be available in the first quarter of 2019. Related Video: Featured Gallery Hellephant Crate Engine SEMA Show Chrysler Dodge Jeep RAM Performance dodge demon hellephant

Plymouth Belmont: Running, driving, Virgil Exner-owned concept car could be yours

Concept cars are such bittersweet things. They're often gorgeous and exciting, but all too often they never see production in even the most watered-down forms. And even then, the beautiful shapes aren't usually driveable. But in the case of this 1954 Plymouth Belmont concept, it is drivable, and it could be yours. This curvaceous roadster, which appeared at the 1954 New York Auto Show and was owned at one time by Chrysler styling master Virgil Exner, is driveable because under the long hood is a 241-cubic-inch V8 coupled to a three-speed automatic transmission. It's not a speed demon with just 157 horsepower, but that's OK, because you don't want to accelerate so fast you deprive the world of the Belmont's beautiful body. For a design from the 1950s, it's impressively restrained and elegant. The flanks are completely smooth and flowing, the only interruptions being the shut lines to the small doors. There aren't even door handles on the sides. Chrome and polished stainless accents are left only to the lights, bumpers, grille, and a slender line that runs along the peak of the fenders from stem to stern. Even the fins are small and subtle (relatively). Even the interior is simple and clean. The dashboard is made of machine-turned metal with white on black analog dials and compass-like needles. Everything else is wrapped in a very light beige leather (probably vinyl), and again, polished surfaces are kept to a minimum. Of course the other great part is that this concept is something you could own because it will go for auction at Barrett-Jackson's Scottsdale auction. There's no publicly available estimate for how much money the car may bring, but it does have a reserve, so be prepared with a little extra cash even if you have the winning bid. The auction runs from Jan. 13 to Jan. 21. Related Video: Image Credit: Barrett-Jackson Chrysler Auctions Convertible Concept Cars Classics

2023 Chrysler 300 gets one new option, otherwise unchanged

Chrysler dropped the goss on the 2023 Chrysler 300 sedan, a bit of whispering that took barely half a minute to read. There is one change coming to next year's 300: The entry-level Touring trim gains the option of the SafeyTec Plus Group. That bundle of features includes advanced brake assist, rain-sensing windshield wipers, LaneSense Lane Departure Warning with Lane Keep Assist, ParkSense front and rear park assist, auto high-beam headlamp control, Full-speed Forward Collision Warning with Active Braking, adaptive cruise control (ACC) with stop, an Alpine audio system with six speakers and a 276-watt amplifier, and an 80-amp alternator. The package costs $2,495 on the next model up, the Touring L, which is probably close to what Chrysler will charge on the Touring. The other new news is a special edition inbound for next year, but the automaker hasn't divulged anything about it. Mopar Insiders says Chrysler will hold a special event at the Detroit Auto Show next week, perhaps we'll find out more then. For a car old enough to have transported Walter P. Chrysler to work and gets effectively zero support in a dying segment, the 300 still looks and performs well and sells adequately. Whereas the Dodge Charger has averaged about 78,000 sales in each of the past two years in the U.S., the 300 had averaged about 17,000 sales in each of the past two years. We'd love to see Chrysler do something — anything — with it before the rumored electric successor arrives. The brand has a huge revamp in the works, though, so we'd also understand Chrysler leaving the old girl in a corner to do her best. Prices haven't been announced yet. We'd expect nominal increases over the current range, which starts at $35,140 for the entry-level rear-wheel-drive Touring and tops out at $46,945 for the 300S with the Hemi V8 before incentives. Related video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.