2005 Chrysler Pt Cruiser Gt Convertible 2-door 2.4l on 2040-cars

Auto blog

Are Chrysler's Stow 'N Go seats really that great?

Are Chrysler's Stow 'N Go seats really such a great thing? Seriously, I'm asking. Do owners of the Chrysler Pacifica, as well as the Dodge Grand Caravan and Chrysler Town & Country before it, actually use the innovative functionality that see the second-row captain's chairs fold away into the floor? Frankly, I've always had my doubts. Car reviewers have long sung Stow 'N Go's praises, impressed with the ability to quickly turn the minivan from people carrier to work van. You'll frequently read mentions of needing to move sheets of plywood or treadmills or their kids' entire dorm room. Doing so is without question far easier when you can quickly make the second-row seats disappear as opposed to giving yourself a hernia lifting the things out and storing them in the garage – if removing them is even possible at all. Except here's the thing. We car reviewers have borrowed that van for the purpose of moving whatever it is we needed to move. Maybe the van in question is a long-term test vehicle like our old Pacifica Hybrid, maybe it's the more typical weeklong test loan. Either way, this is not a typical use case. The van is being considered more for its cargo-carrying abilities than its people-carrying abilities, and I just don't think that's representative of the typical minivan owner. Further to that point, the Stow 'N Go seats' flipping and folding capability might be great for versatility, but it makes for less comfortable seats. Although they have definitely improved in the 15-plus years since they were introduced, the Pacifica's Stow 'N Go seats remain thinner and flatter than the typical captain's chair. One can deduce that even Chrysler is aware of this as a downside. You see, the Pacifica Hybrid does not have Stow 'N Go seats since the giant underfloor hole they stow and go into is full of batteries. Instead, it has second-row captain's chairs  that don't seem to be discernibly different from those up front – they're far more comfortable. You can see the difference in the pictures above, with the gas-only Pacifica in red and the Hybrid in blue. I'm therefore left with the question: Would you rather have a far more comfortable seat, or an improved ability to carry some plywood? Considering the second-row designs of rival vans, it would seem that market research for Honda, Toyota and Kia isn't skewing in the direction of plywood. Much like the rest of the automotive industry, the minivan segment is rife for copy-catting.

NHTSA investigating Harman Kardon for software vulnerabilities

The National Highway Traffic Safety Administration is investigating infotainment units from Harman Kardon, which produces FCA's Uconnect, to determine if Harman Kardon systems used by other companies are also vulnerable to hackings. Researchers discovered a hole in the cellular connection to the Uconnect infotainment in a Jeep Cherokee. They were able to exploit it to gain access to the vehicle's brakes, radio, and other systems. In the wake of the hack, FCA pledged to send out 1.4 million USB drives to update the software. Politicians also attacked the automaker for not reporting the problem sooner, and NHTSA opened an investigation to find whether the fix worked. INVESTIGATION Subject : Software security vulnerability Date Investigation Opened: JUL 29, 2015 Date Investigation Closed: Open NHTSA Action Number: EQ15005 Component(s): EQUIPMENT All Products Associated with this Investigation Equipment Brand Name Part No. or Model No.Production Dates HARMAN KARDON R3R4 - Details Manufacturer: HARMAN INTERNATIONAL SUMMARY: On July 23, 2015, Fiat Chrysler Automobiles (FCA) submitted a safety recall report to NHTSA concerning a software security defect condition in approximately 1.4 million model year (MY) 2013 through 2015 vehicles equipped with Uconnect 8.4A (RA3) and 8.4AN (RA4) radios manufactured by Harman Kardon (Recall 15V-461). According to FCA, software security vulnerabilities in the recalled vehicles could allow unauthorized third-party access to, and manipulation of, networked vehicle control systems. Unauthorized access or manipulation of the vehicle control systems could reduce the driver?s control of the vehicle increasing the risk of a crash with an attendant increased risk of injury to the driver, other vehicle occupants, and other vehicles and their occupants within proximity to the affected vehicle. This EQ is being opened to obtain information from the supplier of Chrysler Uconnect units to determine the nature and extent of similarities in other infotainment products provided to other vehicle manufacturers. If sufficient similarities exist, the investigation will examine if there is cause for concern that security issues exist in other Harman Kardon products. Related Video:

Fiat Chrysler working on an inline-six to replace the Pentastar V6?

Get out your Skeptics Hat for this one and keep it close by. Allpar cites "reliable sources" to write that Fiat Chrysler appears to be working on a new inline-six engine to be slotted into company products around the globe. The purported engine would be based on the 2.0-liter Global Medium Engine inline-four. Allpar first reported on the potential development in February 2017 and has filed a few updates since then, one citing "internal communications referring to a GME T6" — the "T" meaning turbocharged. It's said that some engineers have changed their online resumes to reflect their focus on the new motor. Apparently, FCA tried adding forced induction to the Pentastar V6 but didn't like the results. The new direction then turned toward a "compact straight-six." In at least one guise, the GME I-6 would come in at just under three liters in order to escape taxes on engines 3.0-liters and above in certain European markets; the 2.0-liter four-cylinder has an actual displacement of 1.995 liters. The present V6 Pentastar comes in 3.2-liter and 3.6-liter guises; a turbocharged 3.0-liter straight-six should be able to replace both as far as output. Hooking up to the company's eTorque system used on the 3.6-liter Pentastar and 5.7-liter Hemi would make things even more punchy. With the trend in truck engine downsizing, it wouldn't be crazy to see such an engine head straight to Ram. The four-cylinder GME unit serves in the Alfa Romeo Giulia and Stelvio, and Jeep Cherokee, Wrangler, and Grand Commander. The big Alfa Romeos and full-size Jeep and Ram models shouldn't have any problem with a longer inline engine. Maserati, which doesn't use the Pentastar engine, could be a candidate as well should it choose to step away from its Ferrari-developed engine cred. Speaking of Ferrari, the Italian brand is working up a new V6 based, in its words, on "a very, very particular architecture." It isn't clear where it will go or if one of the other Italian brands will get access to it, but the Allpar piece says the Ferrari V6 will be based on the core GME architecture for Maserati. Chrysler gave up its last inline-six 11 years ago when the 4.0-liter I-6 retired alongside the JK-series Jeep Wrangler. The engine format is back in vogue, and its reincarnations have received good reviews. But inline-sixes are generally longer, hence FCA's focus on a compact unit, and that could limit the purported engine's placement options.