2002 Chrysler Pt Cruiser Touring Edition Fully Loaded Clean on 2040-cars

Auto blog

Junkyard Gem: 1964 Plymouth Valiant V-200 Wagon

When Chrysler introduced the Valiant for the 1960 model year, the automotive world had no idea that this new compact would become one of the most successful products in the company's history. Valiants and its A-Body siblings were built and sold by the millions around the world, with production continuing into the early 1980s (in Australia and South America). The sales pinnacle for the Valiant in the U.S. was 1964, and today's Junkyard Gem is one of those cars: an upscale V-200 station wagon, found in a Denver-area wrecking yard a few weeks back. The Valiant began life as its own marque, became a Plymouth for 1961, left Plymouth for 1962, then returned as a Plymouth model until American Valiant production ceased in 1976, and the Volare took its place. You'll barely see any mention of the Plymouth brand in the 1964 Valiant brochure, and Plymouth badging on the '64s was minimal. You could get the 1964 Valiant wagon as the base V-100, starting at $2,273, or as the nicer V-200 with its $2,388 price tag (that's about $21,150 and $22,220 in 2022 dollars). Valiant coupes and convertibles could be had with the even swankier (by cheap small-car standards) Signet trim level. As Ford showed us in the middle 2000s, numbers are just classier if you spell them out on emblems. In the middle 1960s, substituting an automatic for the base three-on-the-tree column-shift manual transmission jacked up the price of an affordable car by an eye-watering amount. The Torqueflite three-speed automatic and its slick-looking push-button shifter cost 172 bucks extra (around $1,600 today), which made the car more than 7% costlier. A four-on-the-floor manual was available for the first time in a new Valiant that year, but it cost $180. Also new for the 1964 Valiant was a V8 option (a 273-cubic-incher rated at 180 horsepower), but this car has the good old Slant-6. If it's the engine that came with the car when it rolled off the assembly line, it's a 101-horse example with 170 cubic inches… but these cars are notorious for getting engine swaps early and often and I didn't check the block casting numbers. The cassette deck tells us that it was being driven as recently as the late 1980s through middle 1990s. There's some rust in the usual spots, about what this car would have acquired by 1967 if it had stayed in Michigan. This car could have been restored, though the expense for rust repair and interior refurbishment wouldn't have been a good investment from a financial standpoint.

Why Chrysler made the Pacifica Hybrid

There were a number of important details missing from Chrysler's debut of the Pacifica Hybrid yesterday. Pricing and availability, for example. We still don't know those specifics – Chrysler just says it will all be announced closer to launch – but we spent some time with Kevin Mets, the chief engineer for the Pacifica Hybrid, to learn more about the powertrain and why Chrysler decided to offer this vehicle at this time. "This could be a primary electric vehicle for someone." We started with the big question: why build a plug-in minivan at all? "It brings the ability that if you want an electric vehicle, a hybrid, you don't have to compromise size to get there," Mets said. "For instance just a few minutes ago I was talking to someone from Canada and they were saying in the US it's two vehicles per household is kind of the norm. In Canada it's not that way, it's more like a vehicle or even less than a vehicle. There's a lot of people that want an electrical vehicle in Canada but they can't make it their primary vehicle. This is a vehicle that could be a primary electric vehicle for someone in Canada, or anybody else for that matter, who wants a plug-in vehicle, an electric vehicle that doesn't have to compromise in size." So, was the development of the Pacifica PHEV influenced more by customers saying they wanted a plug-in hybrid minivan or was it driven more by green vehicle regulations? "That's a tough one to answer," Mets said. "Certainly you have to meet all the requirements. There's a little bit of everything there. You also can pick what vehicles you want to do it on. You pick which vehicle is the best opportunity and this is the one we chose. It's a little bit of both." As for when the Pacifica Hybrid will reach dealerships, all we know is, "late 2016." But Mets said that the minivan will at some point be available in all 50 states. Initial availability might be limited to places like California, but, "The idea is to sell it nationwide," he said. Chrysler decided on the "Pacifica Hybrid" name instead of the more-accurate "Pacifica Plug-In Hybrid" for simplicity. Anyone who might care that the minivan plugs in will find out that it, indeed, has a plug, the reasoning goes, but when Chrysler talks to the average mass market shopper, "hybrid" tells them everything they need to know. Under the hood (and the floorboards, where the batteries are) there are a lot of new bits.

Pentastar Power: A look inside the Detroit factory that pumps out FCA's potent V6

The Mack Avenue Engine Plant is one of Fiat Chrysler Automobiles' most historic and prolific factories. It pumped out 260,000 Pentastar V6 engines last year, providing power for everything from the Jeep Grand Cherokee to the Dodge Challenger. FCA and its predecessor, Chrysler, has owned the factory since 1953 and it briefly built the Dodge Viper in the 1990s. It's made engines since 1998 and began building the Pentastar in 2014. We got an inside look at the mighty Mack, helping to tear down a Pentastar engine and then a tour of the factory floor. This is what it's like. Plants/Manufacturing Chrysler Fiat Videos Original Video pentastar v6