1990 Chrysler Lebaron Premium Convertible 2-door 3.0l on 2040-cars

Auto blog

FCA recalls Fiat 500e to fix cruise control

Fiat is recalling almost 4,000 of its 500e electric vehicles because of a malfunction related to the model's cruise-control feature. The glitch causes the car's powertrain to be put into neutral under certain situations. It's the second recall on the 500e this year. Specifically, Chrysler-Fiat is recalling 3,975 cars. The issue is that the car's system can misread the motor's torque figures in cruise control, causing the sprightly EV to mistakenly shift into neutral in what was designed as a safety-precaution measure. The good news is that restarting the vehicle gets the car back to normal, but being dropped into neutral in highway mode is certainly no fun. Chrysler-Fiat said in a statement this week that it was "unaware" of injuries, accidents, or customer complaints caused by the issue. In April, the 500e was subject to a recall that impacted about 5,600 vehicles and stemmed from a March 2015 update. The update allowed the car to go into so-called "Limp Home Mode" to better extend range. The problem is that it inadvertently caused the car to stall. Range anxiety, indeed. Take a look at Chrysler-Fiat's press release on the most recent recall below. Related Video: Statement: Software Upgrade June 9, 2015 , Auburn Hills, Mich. - FCA US LLC is voluntarily recalling an estimated 3,975 cars to upgrade cruise-control software. A review of warranty data led to an investigation by FCA US LLC engineers. The investigation discovered certain Fiat 500e hatchbacks were inadvertently equipped with software that may misread torque levels generated by their motors, causing them to shift into neutral – a prescribed failsafe mode. This condition may occur only while cruise-control is engaged and the driver attempts to override the feature with accelerator-pedal applications or rapid tapping of the accelerate/decelerate buttons. Restarting the vehicle restores normal function. The campaign is limited to certain model-year 2013-2015 vehicles. The Company is unaware of any related injuries, accidents or customer complaints. New software will be available when affected customers are advised of this action by FCA US. Service instructions are being sent to FCA US dealers today. Customers with questions may call the FCA US Customer Information Center at 1-800-853-1403.

Hellcrate 6.2-liter V8 delivers plug-and-play Hellcat hype to SEMA

SEMA just provided another entry for the folder marked "What A Time To Be Alive," with Mopar's announcement of the "Hellcrate" 6.2-liter supercharged Crate HEMI engine. Enthusiasts have been desperate to upgrade their vintage rides with the woozy thrills provided by Dodge's Hellcat motor, so Mopar answered. The Hellcrate engine assembly ships in plug-and-play configuration, in specially designed packaging with "Hellcrate" logos. The assembly sells separately from the Hellcrate engine kit, the kit adding a powertrain control module, power distribution center, engine wiring harness, chassis harness, accelerator pedal, ground jumper, oxygen sensors, charge air temperature sensors, and fuel pump control module. The PCM comes programmed with the production-car engine's 707 horsepower and 650 pound-feet of torque. An optional front-end accessory drive kit contributes peripherals like alternator, power steering pump, belts, and pulleys. Don't bother trying to lash up a sleeper 1997 Chrysler Sebring, though; Mopar tuned the Hellcrate for pre-1976 vehicles and manual transmissions. The engine assembly retails for an MSRP of $19,530, and the kit wants a further $2,195. Mopar didn't announce pricing for the accessory drive kit. The engine and kit come with a three-year, unlimited-mileage warranty when bought together. The Mopar Hemi Crate website will be happy to take your orders as of now. For help envisioning the possibilities, stop by Fiat Chrysler's 15,345-square-foot SEMA booth to check out the Limelight Green, Hellcrate-powered 1970 Plymouth Superbird clone worked up by Mark Worman of Velocity's " Graveyard Carz." While you're there you might as well peep Worman's encore, a 1968 Plymouth GTX stuffed with Mopar's 392 Crate HEMI in place of the original 440 big block, and the 1937 Dodge pickup that swallowed a Mopar 345 Crate HEMI. Mopar's come a long way from its original product: antifreeze products. Tomorrow it'll be Jeep's turn to ring the SEMA bells, once the noise dies down from the Mopar-jacked Wrangler Switchback, CJ66 and Jeep Shortcut. You can watch the brand's presentation online at 7:26 p.m. ET/4:26 p.m. PT. Until then, we're going to work the angles on a Hellcrate-powered Plymouth Volare. The sedan, naturally. Because we're practical. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

What the Chrysler 200 will probably look like in convertible form

Since 1996, Chrysler has offered a convertible version of its Sebring and 200. As this seems very unlikely to change, it's safe to assume that a new 200 Convertible is in the works following the unveiling of the radically redesigned sedan. What it will look like, though, remains an open question.
Traditionally, the only major styling differences between the Sebring/200 Convertible and the sedan were found above the beltline. It's likely a 2016 200 Convertible would follow a similar philosophy, especially considering the dashing good looks of the redesigned sedan.
Artist Theophilus Chin has a similar idea, as shown in a pair of renderings he's released. Using a few of the stock photos from the 200 Sedan's reveal, Chin has given us our first glimpse of what a 200 Convertible could looks like. It's sharp, retaining the good looks of the sedan. The windshield looks like it's been swept back further, and obviously, there are a pair of doors missing. Other than that, it's the same attractive car that debuted at Detroit.