1963 Chrysler Imperial 2 Door Hardtop Calif. Car Very Straight on 2040-cars
Oroville, California, United States
Up for sale is a very rare and extremely straight 1963 Chrysler Crown Imperial. I got this car on a trade and am not into Mopar products but if I was, it would be a fantastic candidate for restoration. This is a true Northern California car that has been in storage for many years. It is in very nice shape with no evidence of any type of collision and no rust anywhere. The floorboards, trunk and everywhere else is solid and ready to restore. The dash is in decent shape as are the door panels. The headliner and seats are missing but the headliner bows are here and all other chrome trim is in the trunk. The radiator has been removed as with the water pump and fan. The car turns over just fine and the compression is all within 170 to 178. The trans is complete but unknown as to condition. The car is a very attractive and valuable collector when complete. This car comes with a bill of sale only as the title is no where to be found. There are no fees against the car as it has not been registered for many years and is out of the Calif. system. Please call or text Mike at 510-377-8619 with any questions or email. I will assist with shipping all I can but the cost is the buyers. I can store the car without cost for a reasonable amount of time. |
Chrysler Imperial for Sale
1965 chrysler imperial 2dr coupe. beautiful condition!
Rare find 1 of 9,415 made all original very solid classic collector car wow !!(US $2,900.00)
1955 chrysler imperial-392 hemi-ac-power windows-powersteering-power brakes(US $39,900.00)
1975 chrysler imperial lebaron 4dr hardtop
1966 crysler crown imperial 4dr ht
Frank sinatra edition offered at no reserve
Auto Services in California
ZD Autobody ★★★★★
Z Benz Company Inc ★★★★★
Www.Bumperking.Net ★★★★★
Working Class Auto ★★★★★
Whittier Collision Center #2 ★★★★★
West Tow & Roadside Servce ★★★★★
Auto blog
Stellantis will enter joint venture with Samsung SDI for EV batteries
Tue, Oct 19 2021SEOUL — South Korean battery maker Samsung SDI Co Ltd and global automaker Stellantis NV have agreed to jointly produce electric vehicle (EV) batteries for the North American market, a person familiar with the matter said on Tuesday. Samsung SDI, an affiliate of South Korean tech giant Samsung Electronics, already has EV battery plants in South Korea, China and Hungary, which supply customers such as BMW and Ford. "The two companies (Samsung SDI and Stellantis) have struck a MOU (memorandum of understanding) to produce EV batteries for North America," the person with knowledge of the matter told Reuters. The source spoke of condition of anonymity because of the sensitivity of the matter. The person said the location of the battery joint venture is under review and will be announced later. In July, Reuters reported that Samsung SDI may build a battery plant in the United States, citing a company source. South Korea's Yonhap news agency earlier reported the two companies plan to build a factory in the United States, citing industry sources. Samsung SDI and Stellantis did not have immediate comment when reached by Reuters. Stellantis on Monday struck a preliminary deal with battery maker South Korea's LG Energy Solution (LGES) to produce battery cells and modules for North America. Shares of Samsung SDI were up 2.6% as of 0300 GMT, versus a 0.6% rise in the KOSPI benchmark index. Related video: Green Alfa Romeo Chrysler Dodge Ferrari Fiat Jeep Maserati RAM Citroen Lancia Opel Peugeot Vauxhall
Brand new cars are being sold with defective Takata airbags
Wed, Jun 1 2016If you just bought a 2016 Audi TT, 2017 Audi R8, 2016–17 Mitsubishi i-MiEV, or 2016 Volkswagen CC, we have some unsettling news for you. A report provided to a US Senate committee that oversees the US National Highway Traffic Safety Administration (NHTSA) and reported on by Automotive News claims these vehicles were sold with defective Takata airbags. And it gets worse. Toyota and FCA are called out in the report for continuing to build vehicles that will need to be recalled down the line for the same issue. That's not all. The report also states that of the airbags that have been replaced already in the Takata recall campaign, 2.1 million will need to eventually be replaced again. They don't have the drying agent that prevents the degradation of the ammonium nitrate, which can lead to explosions that can destroy the airbag housing and propel metal fragments at occupants. So these airbags are out there already. We're not done yet. There's also a stockpile of about 580,000 airbags waiting to be installed in cars coming in to have their defective airbags replaced. These 580k airbags also don't have the drying agent. They'll need to be replaced down the road, too. A new vehicle with a defective Takata airbag should be safe to drive, but that margin of safety decreases with time. If all this has you spinning around in a frustrated, agitated mess, there's a silver lining that is better than it sounds. So take a breath, run your fingers through your hair, and read on. Our best evidence right now demonstrates that defective Takata airbags – those without the drying agent that prevents humidity from degrading the ammonium nitrate propellant – aren't dangerous yet. It takes a long period of time combined with high humidity for them to reach the point where they can rupture their housing and cause serious injury. It's a matter of years, not days. So a new vehicle with a defective Takata airbag should be safe to drive, but that margin of safety decreases with time – and six years seems to be about as early as the degradation happens in the worst possible scenario. All this is small comfort for the millions of people who just realized their brand-new car has a time bomb installed in the wheel or dashboard, or the owners who waited patiently to have their airbags replaced only to discover that the new airbag is probably defective in the same way (although newer and safer!) as the old one.
Fiat Chrysler parts firm Magneti Marelli sold for $7.1B
Mon, Oct 22 2018TOKYO/MILAN — Japan's Calsonic Kansei, owned by U.S. private equity firm KKR, has agreed to buy Fiat Chrysler's Magneti Marelli for 6.2 billion euros ($7.1 billion) to form the seventh-largest independent car parts supplier. The first big deal by FCA's newly-appointed chief executive Mike Manley, who took over in July after the sudden death of long-time boss Sergio Marchionne, creates a company with revenue of 15.2 billion euros ($17.5 billion), the companies said. The newly formed Magneti Marelli CK Holdings is likely to cut costs through synergies and expand its customer base as components makers try to keep up with a shift by carmakers into autonomous driving, connected cars and electric vehicles. "This combination with Calsonic Kansei has emerged as an ideal opportunity to accelerate Magneti Marelli's future growth," Manley said on Monday of the FCA unit, which specializes in lighting, powertrain and high-tech electronics. FCA shares were up 5.2 percent at 0906 GMT as investors welcomed the hefty price tag, which will boost FCA's net cash position and raises expectations of a share buyback. "Getting this transaction completed at the price agreed is a significant early milestone and accomplishment," George Galliers, an analyst at Evercore ISI, said of Manley and his team's ability to match Marchionne's deal-making reputation. Marchionne had set in motion a process to spin off the unit and distribute its shares to FCA shareholders by early 2019, but said in June that FCA would still be "receptive" to an offer. Neither FCA nor its top shareholder, Fiat's founding Agnelli family, will have a stake in the combined business, but FCA said it would enter into a multi-year agreement to secure supplies to its plants and also to maintain operations and staff in Italy. Part of a global expansion KKR bought Calsonic from Nissan and other shareholders in 2016, saying it would help the parts maker, which relies on the Japanese carmaker for most of its sales, to expand globally. Calsonic has been in talks with FCA for months and made an initial 5.8 billion euro bid, sources have said. FCA does not break out earnings for Magneti Marelli, which sits within its components unit alongside robotics specialist Comau and castings firm Teksid. The unit employs around 43,000 people and operates in 19 countries. A takeover of Magneti Marelli had remained elusive as potential bidders were offering too little or were only interested in some parts of the business.