1962 Chrysler 300 Convertible on 2040-cars

Auto blog

Taking a truly driverless ride in Waymo's Chrysler Pacifica

Today was a first for me: I drove in a fully autonomous vehicle on roads without anyone behind the wheel. They weren't public roads, but they did have intersections, other vehicles, pedestrian traffic, cyclists and more, and the car managed a fairly long route without any human intervention — and without any cause for concern on my part. I've done a lot of self-driving vehicle demos, including in Waymo's own previous-generation Lexus test vehicles, so I wasn't apprehensive about being ferried around in Waymo's Chrysler Pacifica minivan to begin with. But the experience still took me by surprise, in terms of just how freeing it was once it became apparent that the car was handling things all on its own, and would continue to do so safely regardless of what else was going on around it. Waymo's test track at Castle (more on that facility here) included multiple intersections with traffic lights, a roundabout, cars stopped on the shoulder, crossing foot band cycle traffic and more. Even if these were staged, they'd be hard to replicate in exact detail every time, so despite the fact that Waymo clearly had more control here than they would out in the real world, the driving experience was still impressive. In particular, one event stuck with me: A squirrel (or other small rodent, I'm no expert on the fauna of Northern California) darted out quickly in front of the car, before turning back off the road – but the vehicle perceptibly slowed in case it needed to avoid it. Barring an incredibly lifelike animatronic, this isn't something Waymo could've planned for. Regarding how it actually works, once in the vehicle and buckled up, a rider taps a button to start the ride, and then displays mounted on the backs of the front seats show a visualization of what the car's sensors see, but selectively simplified and redesigned to draw focus to things that riders find important, and to reassure them about the system's competence and ability to spot all the key variables on the road. This is essentially the same car driving riders around Chandler, in Phoenix, where the current Waymo pilot is operating. It's still essentially a stock Pacifica van, with a premium trim upgrade, but included features in that vehicle, including the many USB ports for charging located throughout, the dual screens mentioned above on the seat backs, and the rear cabin AC and climate controls all make it particularly well suited to the task of putting the rider first.

2021 Chrysler Pacifica gets fresh face and brings back all-wheel drive

The rumors were true, the 2021 Chrysler Pacifica has brought back all-wheel drive as an option after it disappeared from Chrysler minivans in 2004. Not only that, buyers don't have to choose between having more traction or more cargo flexibility, as both features can coexist on one van. And to herald the changes, Chrysler has also updated the styling, features and trim line. Of course the all-wheel drive is the biggest change, and according to Chrysler representatives we talked to, it was something that was planned for since the launch of this generation of Pacifica. When the platform was developed, they wanted to make sure that if demand called for bringing it back (and it did, more on that later), that it wouldn't be difficult to implement, and that the fold-into-the-floor Stow 'N' Go second-row seats would still fit. Some changes were necessary, such as rerouting the exhaust and tweaking the design of the gas tank, which retains the same volume as a front-drive van. The all-wheel-drive system itself is capable of routing power completely to the rear if necessary, and the driveshaft and power takeoff unit can disengage for fuel savings. It's controlled entirely automatically, taking into account the severity of driver steering and throttle inputs, outside temperature, use of windshield wipers and detection of wheel slip. Besides the extra drive wheels, the 2021 Pacifica gets a reworked nose and hatch. The fascia is much more aggressive with its taller, frowning main grille. The headlights have new LED running light designs. Around at the back, the taillights are new full-width units. The interior has more subtle but still noteworthy changes. All Pacificas now have a 10.1-inch infotainment display as standard, and they're the first FCA products to use the Uconnect 5 operating system. The system brings several upgrades including full Amazon Alexa integration, wireless Apple CarPlay and Android Auto, multiple driver profiles, and more, which you can read about here. Pacificas are also available with a new center console that offers more covered storage space, but also gives the front seats a more cosseted feel like in a car or a crossover. They all differ on overall length toward the back and what kind of arm support they provide. Chrysler also offers something called the FamCam, which gives the driver and front passenger the ability to keep an eye on the kids with cameras controlled from the touchscreen.

Stellantis announces ‘Circular Economy’ business to drive revenue, decarbonization

Stellantis has already announced its plans to reach net-zero carbon emissions by 2038. Today, the automaker has announced a new business unit to help it reach that goal while generating 2 billion euros per year in revenue by 2030. The “Circular Economy” business will help make revenue less dependent on finite, rare and ecologically problematic materials. The Circular Economy model features what Stellantis calls a “4R” strategy, comprising remanufacturing, repair, reuse and recycling. The goal is to make materials last as long as they can, reducing reliance on the acquisition of those precious new materials in the future by returning them to the business loop when theyÂ’ve reached the end of their first life. Through these processes, Stellantis says it can save up to 80% raw material and 50% energy compared to manufacturing a new part. Remanufacturing, or “reman” in Stellantis shorthand, means dismantling, cleaning and rebuilding parts to OEM spec. Nearly 12,000 remanufactured parts are available for customers to purchase. Some remanufacturing is done in-house, and some with partners and through joint ventures. Repair is pretty obvious — fixing parts to put back into vehicles. This also consists of reconditioning, to make a vehicle feel like new. Stellantis boasts 21 “e-repair” centers for repairing electric vehicle batteries.  Reuse refers to parts still in good condition from end-of-life vehicles sold as-is. Stellantis says it has 4.5 million multi-brand parts in inventory. These are sold in 155 countries through the B-Parts e-commerce platform. Reuse also refers second-life options, such as using batteries outside of automotive purposes. Recycling involves dismantling parts and scraps back into raw material form that is then looped back into the manufacturing process. Stellantis says it has collected 1 million parts for recycling in the past six months. Recycling doesnÂ’t get counted in that aforementioned 2 billion euros of revenue, but it does save the company money on acquisition of raw materials. As for batteries, specifically, Stellantis expects this recycling business to ramp up after 2030, when the packs currently in service begin to reach the end of their lifecycle. Stellantis will use its new “SUSTAINera” label to denote parts that are offered as part of its Circular Economy business.