Electric New Bluetooth Enhanced Safety Pack 1 (0 P) Crystal Red Tintcoat on 2040-cars

Auto blog

GM reintroduces Tripower name in the worst way possible

The story of General Motors' use of the Tripower moniker begins way back in 1957, when Semon E. "Bunkie" Knudsen, then General Manager of GM's Pontiac division, directed his engineers to inject more performance into his brand's line of V8-powered automobiles. Fuel injection was an option, but hot rodders flocked instead to Tri-Power (marketed way back when with a hyphen), which grafted a trio of two-barrel Rochester carburetors onto a single intake manifold. A legend was born. And that legend was born of performance. At idle and when full power wasn't required, Pontiac's Tri-Power system used just the middle carburetor, which helped make the setup easier to tune. Depending on the year and model, either a vacuum system or a mechanical linkage opened up the two outer carbs, thereby switching from two barrels to six, and allowing the engine to take in more fuel and air. And it was an easy marketing win – six barrels is better than four barrels, right? Because performance! So, when news filtered in that GM has resurrected the Tripower name, those of us who grew up attending classic car shows and wrenching on old Pontiacs did a double-take. And then we all collectively sighed. Turns out that today's Tripower refers to a trio of fuel-saving measures that include cylinder deactivation, active thermal management, and intake valve lift control, according to Automotive News. And, at least for now, it applies to GM's line of fullsize trucks powered by a 2.7-liter turbocharged four-cylinder engine. We're all for saving fuel whenever possible. And we have zero say in how any automaker chooses to market its products and technologies. But, we'll offer our two cents anyway: Relaunching a storied name from the past is fine. Relaunching a storied name from the past while completely overlooking the reasons the name got famous in the first place is only going to irritate the people who remember the name in the first place. Couldn't they just call this new technology package something else? Related Video: News Source: Automotive NewsImage Credit: Getty Green Marketing/Advertising Chevrolet GM Pontiac Automotive History Truck chevrolet silverado

2017 Chevy Bolt Prototype Quick Spin [w/video]

To say that there's a lot riding on the upcoming Chevy Bolt doesn't quite get at how important this all-electric vehicle could be for GM. To say that there's a lot riding on the upcoming Chevy Bolt doesn't quite get at how important this all-electric vehicle could be for GM. We are entering a new phase for EVs in the US, and it's one where there will be more than one 200+ mile range electric model that will cost around $30,000-$35,000. The two obvious first entries are the Tesla Model 3 and the Bolt, but you can bet your Level 2 charger that Nissan will be joining the party as well, along with all sorts of as-yet-unannounced entries from other automakers. The main change that all of these longer-range EVs will bring is – potentially – to make plugging in your car a mainstream thing. And if the mainstream is in play, then there's money to be made, and you're going to need one heck of an EV to get people to pick your car instead of someone else's. So, yeah, the Chevy Bolt could be a big deal. And today we not only got a bit more information about the car but we also got to go on a really short test drive in a prototype version outside of the Las Vegas Convention Center as part of CES 2016. The "drive" took place in a closed-off parking lot and my two laps through the cone course took less than three minutes, but I can still say that it looks like GM will be bringing a solid option to the marketplace soon. Chevy Bolt Prototype front 3/4 View 16 Photos If you shift into L, the regen becomes wonderfully strong. One of the pleasant surprises in the Bolt prototype is the ability to drive with just one pedal. When in D, the Bolt coasts a bit, which is nice for highway driving, but if you shift into L, the regen becomes wonderfully strong. Strong enough that you don't need to engage the brakes at all if you're in standard city traffic, with lots of gentle stops and starts. If you want even more stopping power without getting the brakes involved, the Bolt also has the regen-on-demand feature that was introduced in the Cadillac ELR and works great in the second-gen Chevy Volt. When you pull the paddle on the left back side of the steering wheel, the electric motor instantly becomes a generator and the Bolt turns forward momentum into energy for the battery pack. It will even bring the car to a complete stop and then hold it when you release the paddle.

Next-gen Chevy Silverado and GMC Sierra may use carbon fiber

It's been generally accepted that the next generation of full-size GM trucks will use some sort of strong, lightweight material for the beds while retaining steel for the cab. While aluminum seems like the most obvious choice, according to Automotive News, the Chevy Silverado and GMC Sierra will incorporate both aluminum and carbon fiber in their beds. The publication cites sources from within GM, though it seems the introduction of this comparatively exotic material mix is still a few years off. While carbon fiber is both stronger and lighter than steel and aluminum, it takes significantly more time and money to produce, essentially relegating the material to small-volume cars. The main benefit for trucks is the resulting reduction in weight to improve fuel economy without sacrificing the tough, rugged capabilities truck buyers expect. The Ford F-150 made the switch to aluminum for the 2015 model year and it's proved highly successful. It seemed like it was only a matter of time before the competition followed suit. Automotive News says that the next-gen trucks will launch with aluminum beds and that it will take a couple of years before we'll see any carbon fiber incorporated into the design. Even then, only look for the composite material on higher-trim models, with a trickle down to lower-spec trucks possible further in the future. In 2011, GM announced it was working with Japan-based Teijin Limited on a carbon fiber reinforced thermoplastic. There's a good chance that material's introduction will be on trucks. Related Video: News Source: Automotive News Plants/Manufacturing Rumormill Chevrolet GM GMC Truck