2014 Chevrolet Volt Base on 2040-cars

Auto blog

NHTSA investigating nearly 750,000 GM models over non-deploying airbags

Nearly 750,000 vehicles built by Chevrolet, GMC, and Cadillac are the subject of a National Highway Traffic Safety Administration (NHTSA) investigation due to non-deploying driver-side airbags. While the investigation is ongoing, the agency believes the issue is likely due to rust particles that form on the inflator's connection terminal interface. The list of nameplates included in the investigation includes Chevrolet's Silverado, Tahoe, and Suburban, GMC's Sierra, Yukon, and Yukon XL, plus Cadillac's Escalade, Escalade ESV, CT4, CT5, and XT4. All of the potentially affected vehicles are 2020 or 2021 models, according to a bulletin published on the NHTSA's website. Investigators launched the probe in April 2021 after 15 consumers reported airbag-related issues, including nine who said an airbag malfunction light appeared in the instrument cluster. More alarmingly, the NHTSA is aware of six accidents that caused significant damage to the car's front end yet didn't trigger the driver's airbag. It adds that there are no fatalities linked to the issue, but there are six crashes and eight injuries reportedly blamed on it. No evidence suggests this problem is related to the millions of potentially deadly Takata inflators recalled over the past few years. General Motors is aware of the defect. It sent a technical service bulletin (TSB) to its dealers in March 2021 to address the aforementioned warning light. The note explains the issue is due to "rust particles in the connection terminal interface of the driver's airbag inflator." The company hasn't issued a safety recall yet, however. Whether it will partially depends on the NHTSA's findings. It's currently looking into the scope and the severity of the problem, and it wants to understand its implications on driver safety. Investigators will decide whether General Motors needs to recall the 749,312 cars that are part of the probe when they close their investigation. General Motors has already spent a significant amount of money replacing defective airbag-related parts in its cars. In November 2020, it was ordered by the American government to recall nearly 6 million pickup trucks and SUVs equipped with potentially dangerous Takata airbag inflators. It repeatedly argued that testing proved the inflators were safe, and it petitioned the agency four times starting in 2016 to avoid a recall, which cost an estimated $1.2 billion (about a third of its net income in 2020).

GM’s move to Woodward is the right one — for the company and for Detroit

Back in 2018, Chevy invited me to attend the Detroit Auto Show on the company dime to get an early preview of the then-newly redesigned Silverado. The trip involved a stay at the Renaissance Center — just a quick People Mover ride from the show. IÂ’d been visiting Detroit in January for nearly a decade, and not once had I set foot inside General MotorsÂ’ glass-sided headquarters. I was intrigued, to say the least. Thinking back on my time in the buildings that GM will leave behind when it departs for the new Hudson's site on Woodward Avenue, two things struck me. For one, its hotel rooms are cold in January. Sure, itÂ’s glass towers designed in the 1960s and '70s; I calibrated my expectations accordingly. But when I could only barely see out of the place for all the ice forming on the inside of the glass, it drove home just how flawed this iconic structure is.  My second and more pertinent observation was that the RenCen doesnÂ’t really feel like itÂ’s in a city at all, much less one as populous as Detroit. The complex is effectively severed from its surroundings by swirling ribbons of both river and asphalt. To the west sits the Windsor tunnel entrance; to the east, parking lots for nearly as far as the eye can see. To its north is the massive Jefferson Avenue and to its south, the Detroit River. You get the sense that if Henry Ford II and his team of investors had gotten their way, the whole thing would have been built offshore with the swirling channel doubling as a moat. This isnÂ’t a building the draws the city in; itÂ’s one designed to keep it out. Frost on the inside of the RenCen hotel glass. Contrasted with the new Hudson's project GM intends to move into, a mixed-use anchor with residential, office, retail and entertainment offerings smack-dab in Detroit's most vibrant district, the RenCen is a symbol of an era when each office in DetroitÂ’s downtown was an island in a rising sea of dilapidation. Back then, those who fortified against the rapid erosion of DetroitÂ’s urban bedrock stood the best chance of surviving. This was the era that brought us ugly skyways and eventually the People Mover — anything to help suburban commuters keep their metaphorical feet dry. The RenCen offered — and still offers — virtually any necessity and plenty of nice-to-haves, all accessible without ever venturing outside, especially in the winter, but those enticements are geared to those who trek in from suburbia to toil in its hallways.

1970 Chevy Camaro gets 650-hp crate engine for SEMA

The latest edition of the Chevrolet Performance catalog arrives at the 2015 SEMA Show, and to demonstrate the insane creations that are possible with it, the company has a seriously powerful machine in tow. This custom 1970 Camaro RS boasts the new LT4 crate engine that makes a staggering 650 horsepower and 650 pound-feet of torque. The offering gives hot rod builders the ability to put the Corvette Z06's 6.2-liter supercharged V8 into any project where they can make the mill fit. This Hyper Blue Metallic Camaro should offer neck-snapping performance with its massively powerful engine and a T-56 Super Magnum six-speed manual gearbox. Chevy's show car is about more than just packing copious horsepower into a classic shape, though. The builders also overhaul the suspension with coilovers at the front and rear, in addition to a four-link setup at the back. Behind the 19-inch aluminum wheels, the coupe has Z06-based brakes at both ends. For better visibility, it wears LED headlights and taillights. Plus, the interior gets custom gauges and a six-point roll cage. With pieces like titanium intake valves and forged aluminum pistons, the LT4 crate engine comes ready to offer serious performance, but Chevy also gives builders a few options to fit their application. The mill is available with either wet- or dry-sump lubrication. Depending on the version, there are kits to fit front-end accessories, air conditioning, and power steering, as well. The new Chevy Performance catalog features other high-performance components like Z06-based parts for the standard Stingray and an array of performance upgrades for the 2016 Camaro, including suspension lowering kits, brake upgrades, and more. We look forward to seeing this vast collection of goodies at SEMA this year. Related Video: Classic 1970 Camaro Shows Supercharged LT4 Heart Contemporized muscle car highlights new Corvette Z06-based crate engine LAS VEGAS – Chevrolet Performance is showing off the new LT4 crate engine in the most attractive way possible – under the hood of a classic 1970 Camaro RS. The concept vehicle was introduced today at the SEMA Show, in Las Vegas. As the supercharged 6.2L heart of the Corvette Z06, the LT4 is rated at 650 horsepower and 650 lb-ft of torque, making it the most powerful production-vehicle engine ever from General Motors. The new crate engine – offered in dry-sump and wet-sump versions – allows builders to use the high-tech performance engine in their hot rod projects.