2002 Chevrolet Venture on 2040-cars

Auto blog

How GM engineers are using diaper 'snow' to keep you warm

Testing how snow affects General Motors' vehicles isn't really a problem right now for the company's engineers, but in the dog days of summer the process isn't exactly easy. The only real option is for them to book time at the automaker's climatic wind tunnel. However, a flash of brilliance from an engineer allows snow to be simulated regardless of the temperature outside, and the discovery is all because of his daughter's wet diaper. The realization came to GM Thermal Systems engineer Nicholas Jahn while he was swimming with his daughter and noticed how her diaper ballooned in size in the water. He found out the substance that makes this possible is called sodium polyacrylate. When the material gets wet it grows and forms fluffy flakes that are a close imitation of snow. Best of all, the stuff can be prepared easily any time of the year, and it's reusable. The engineering team uses the material to test the effectiveness of the heating systems of GM's vehicles. They spread the sodium polyacrylate over the inlets at the base of the windshield to obstruct the airflow and then crank the heater. After some time, they can see how much is being sucked into the system and design more efficient systems in the future. See how the process works in the video above and read about the diaper discovery in GM's press release below. Diapers Change Chevy Cruze Winter Warm-up Time GM validation engineer uses diaper material "snow" to reduce frigid drives 2015-01-06 DETROIT – An item commonly found on an infant's changing table is helping General Motors' engineers simulate snow year round, ensuring heating systems in cars like the 2015 Chevrolet Cruze can quickly and efficiently warm its interior. Packed snow can prevent air from entering the inlet panel at the bottom of the windshield, obstructing the flow of air into the heating system and reducing the amount of air it can push out. This can lead to less efficient warming of the car's interior and windshield defrosting. "The last thing anyone wants to do when it's freezing cold out is scrape their windshield," said Nicholas Jahn, GM Vehicle Thermal Systems engineer. "The testing we perform on the Chevrolet Cruze with the diaper material allows us to maximize the car's heating capabilities." Ironically, Jahn stumbled upon his diaper-based testing method in the middle of summer. During a swim with his daughter, he noticed her diaper multiplied in size when it came into contact with water.

2016 Chevy SS gets new face, clears throat

Chevy is tweaking the SS once again for the 2016 model year. While the changes might be minor, muscle sedan enthusiasts shouldn't need any more excuse to love the Bowtie brand's performance sedan. The 2016 Chevy SS benefits from revised front-end styling that incorporates new vertical ducts designed to direct airflow over the front wheel wells. It also gets new LED lighting and new functional hood vents to make it look even more aggressive than the current model. Although the 6.2-liter V8 carries over unchanged from the existing version – churning out 415 horsepower and an equal amount of torque – a new dual-mode exhaust promises to be both quieter at lower speeds and angrier-sounding at higher revs. And of course you can still get it with a six-speed manual or automatic transmission. In any event, it should also look the business with its new 19-inch alloys as well. Related Video: 2016 Chevrolet SS Designed for Performance DETROIT – Building on the performance-oriented updates made to the Chevrolet SS last year, the 2016 model features several exterior enhancements that reinforce its presence on the road. A revised front fascia features new, vertical ducts at the outer edges to direct airflow over the front wheel openings to improve aerodynamic efficiency. The fascia also incorporates new LED signature lighting, while new, functional hood vents and new-design 19-inch cast-aluminum wheels contribute to a stronger appearance for the rear-drive sports sedan. "The 2016 SS design changes more fully express the true driving character of the sedan while further enhancing the car's overall performance," said Todd Christensen, Chevrolet Performance Car marketing manager. What hasn't changed is the SS's unique blend of performance, comfort and spaciousness. It features a 6.2L V-8 engine under the hood and turns out an SAE-certified 415 horsepower (310 kW) and 415 lb-ft of torque (563 Nm), and offers a six-speed manual transmission or a paddle-shift six-speed automatic transmission. A new, dual-mode exhaust system for 2016 complements the V-8 engine with quieter performance at low engine speeds and a more muscular engine note at wide-open throttle.

Next Chevy Silverado could get this built-in tailgate step

General Motors just received patent approval for a tailgate step in a pickup bed. And given the timing, don't be surprised if you see this on the upcoming 2019 Silverado pickup (not the mention its GMC Sierra twin), expected to arrive in late 2018. According to the patent, granted in December of last year, the whole mechanism is housed in the tailgate assemble. The magic happens when a portion of the top half of the tailgate swings down and a step folds out. There's also a handle that locks into position to help climb up into the bed. As trucks get bigger and taller over the years, it gets harder and harder to access the cargo bed. Ford's solution with the 2009 F-150 was a step that slides out from the end of the tailgate. Back then, Chevy made an ill-advised ad highlighting the feature for Ford. And while Howie Long mocked the F-150's "man step" Ford saw almost a third of its trucks with the option in the first year. The GM design seems to improve on Ford's idea as it appears to be wider and has a back to the lower step. That is, you don't have to worry about stepping through the ladder-rung design as on the F-150. Ford's tailgate step later spread to the F Super Duty, and other cargo access assists have proliferated through the truck world. On the most recent redesign, the Chevrolet Silverado took a trick from the Avalanche and added cutouts to the corners of the rear bumper that act as a foothold. Ford also offers a deployable side step, Chevrolet has running boards that scoot rearward with a kick of the boot, and Ram offers fixed wheel-to-wheel side rails. Nissan is in on the game too, with an optional folding step that tucks under the rear bumper. We don't expect Chevrolet to comment on when or if we'll see this feature in the showrooms. But given that engineers are already hard at work on the next Silverado and the timing of this patent lines right up with the new truck's development cycle, we'll be disappointed if this patent stays in the file cabinet. Related Video: