2014 Chevrolet Traverse Ltz on 2040-cars

Auto blog

2016 Camaro gets most revealing tease yet

Chevrolet started its long teaser campaign for the 2016 Camaro by just revealing the exhaust manifold and front frame, but as time has passed the company has slowly unveiled more. In the latest glimpse ahead of the pony car's May 16 debut, we're actually getting to see the model's profile completely undisguised. As suggested by the recent tease of the rear and hood, the 2016 Camaro wears a sharper, more angular design than the current model. This is especially the case when you look at the taut lines making up the rear. Chevy claims that the new shape underwent 350 hours of wind tunnel tests to be able to generate left lift, improve cooling and reduce wind noise in the cabin. A smooth underbody pan is among the aerodynamic tweaks, and it runs from underneath the front grille to the center of the Camaro. Chevy asserts that all of the changes at the front help reduce lift by 30 percent. Related VIdeo: 2016 Camaro is all about the Aero Total aerodynamic lift improved by 30 percent for improved stability 2015-05-11 DETROIT – After 350 hours of wind tunnel testing – often 24 hours a day – the new Camaro will slip more easily through the wind, and drivers of the Camaro SS will experience a marked improvement in reduced aerodynamic lift. These changes illustrate the lengths the aerodynamics team went to for improved performance, stability, cooling and lower wind noise intrusion "The importance of aerodynamics increases exponentially as we increase vehicle performance," said Kirk Bennion, Exterior Design manager. "As engine output increases, we need more engine cooling. As acceleration and top speeds climb, we need to reduce lift for better high-speed stability. However, we cannot make any changes at the expense of increasing drag, which can hurt fuel economy. "To balance these different aerodynamic targets, we tested literally hundreds of changes on the new Camaro, millimeters at a time." For example, the initial design called for the lower grille bars to be set at a 20-degree angle to the horizon. However, after meticulous testing, the team improved engine-cooling airflow by 1 percent by shifting the angle to 13 degrees – a change that achieved the airflow target while maintaining the original grille design. And rather than a traditional front air dam to reduce aerodynamic lift, the team developed a flush belly pan that stretches from the front grille to the center of the vehicle.

Fernando Alonso fails to qualify as Pagenaud takes Indy pole

Former Formula One world champion Fernando Alonso narrowly failed to qualify for the Indianapolis 500 on Sunday as France's Simon Pagenaud took pole position for the May 26 race. Kyle Kaiser beat out Alonso for the final spot in the 33-car field when he finished third, one spot ahead of the Spaniard, in a six-car shootout that determined the Indy 500's last row. The 23-year-old Kaiser, the last driver to take the track, averaged 227.372 mph for his four laps, a mere 0.019 mph ahead of Alonso's 227.353 mph average in the McLaren-prepared Chevrolet. "We never surrendered. We kept trying," Alonso, 37, told reporters after a tough week at the famed speedway. The Spaniard crashed his Chevrolet in practice on Wednesday and missed nearly two full days of practice while a back-up car was prepared. Then he tried five times on Saturday to qualify, puncturing a tire on the first attempt. Alonso had a completely new set up for Sunday's shootout but could not get the speed he needed to qualify. "I think the car felt better today than what we had yesterday. (So I am) happy with things we tried," he told reporters before learning he had not qualified. Pagenaud had a four-lap average speed of 229.992 mph to become the first Frenchman to take the pole since Rene Thomas in 1919. "It's just amazing," Pagenaud, who last week won the IndyCar Grand Prix on the track's road course, told NBC Sports. "Obviously last week was amazing, but this is even more special." He will be joined by Ed Carpenter (229.889) and Spencer Pigot (229.826) on the front row. But the Cinderella story belonged to Kaiser, the 33rd qualifier. "I don't think I can wrap my mind around what we just did," he said after bumping Alonso from the field. "This is all the credit to the team. They've been working non-stop trying to get this car ready for us and they did everything that we needed to get into this field." (Reporting by Gene Cherry in Raleigh, North Carolina; Editing by Ken Ferris)Related Video: Motorsports Chevrolet McLaren Racing Vehicles F1 IndyCar

GM to sink over $900M into 4 plants, mostly for a new V8

FLINT, Mich. — General Motors says it will spend more than $900 million to update four factories, with the bulk going to an engine plant in Flint, Michigan, to build the next-generation V8 for big pickup trucks and SUVs. Factories in Rochester, New York; Defiance, Ohio; and Bay City, Michigan, also will see investments, some to make V8 engine components as well as parts for future electric vehicles, the company said Friday. The investments won't create any new jobs, but they will preserve about 2,400 hourly and salaried positions positions at the four sites, the company said. The investments “provide job security at these plants for years to come,” Gerald Johnson, GM's manufacturing chief, said in a statement. Much of the money, $579 million, will go to Flint Engine Operations for equipment to build the sixth-generation small-block V8 that will go into the next round of big pickup trucks and SUVs. The plant now employs about 700 people who also will keep making their current product, a diesel engine used in light trucks. GM, like other automakers, is facing stricter government fuel economy standards and pollution limits starting in the 2024 model year. New vehicles sold in the U.S. will have to average at least 40 miles per gallon of gasoline in 2026, up from about 28 mpg, under new Biden administration rules that undo a rollback of standards enacted under former President Donald Trump. That means the new V8 will have to get better mileage and pollute less than the current versions. Although GM wouldn't release details on the new engine, Johnson said during a news conference at the Flint plant that it would be more efficient than the current version. GM has a goal of selling only electric passenger vehicles by 2035, but Johnson said that's a dozen years out, a period when many customers will still want gas engines. “We know that has a horizon,” he said. “Between here and there, there are a lot of internal combustion customers that we don't want to lose,” he said. In addition to Flint, GM's engine components plant in Bay City, Michigan, will get $216 million to build camshafts and connecting rods, and to machine engine blocks and heads for the new V8 being built in Flint. The plant now employs about 425. The Defiance, Ohio, foundry will get $55 million to build a variety of block castings for the new V8. Included is $8 million for castings to support future electric vehicles, the company said. The plant has about 530 employees.