2005 Chevy Trailblazer on 2040-cars

Auto blog

GM recalls 330,000 fullsize trucks for airbag replacement

General Motors has announced a recall of 330,198 fullsize pickups in the US in the aftermath of the announcement made on May 19 that doubled the number of vehicles being called in to replace Takata's defective airbag inflators. That announcement expanded the nationwide recall to an estimated 33.8 million vehicles in the US. Heavy Duty versions of the 2007 and 2008 Chevrolet Silverado and GMC Sierra are included in GM's move, for the purpose of replacing the passenger airbag inflators. The announcement made by the National Highway Traffic Safety Association cited long-term exposure to moisture as a possible cause of the inflator issues. GM says it isn't aware of any problems with the recalled pickups due to moisture, nor has it had any reports of crashes, injuries, or fatalities, and has not received any complaints. GM will notify owners, who can then take their trucks to the dealers to have them repaired free of charge. You'll find a statement from GM and the recall notice from NHTSA below. Related Video: General Motors Statement General Motors is recalling 330,198 2007 and 2008 model year full-size Chevrolet Silverado heavy duty and GMC Sierra heavy duty pickup trucks in the U.S. to replace the passenger air bag inflators manufactured by TK Holdings Inc. (Takata). This recall implements Takata's air bag inflator equipment recall announced on May 19, 2015 (NHTSA recall number 15E-041). GM is not aware of any humidity-related ruptures in Takata air bag inflators in any GM-badged vehicles in the field and knows of no crashes, injuries, fatalities or complaints regarding air bag performance in these vehicles. Including Canada and exports, the total number of vehicles being recalled is 374,715. Population breakdown: United States 330,198 Canada 39,630 Exports 4,887 Total 374,715NHTSA RECALL NOTICE: Report Receipt Date: MAY 28, 2015 NHTSA Campaign Number: 15V324000 Component(s): AIR BAGS Potential Number of Units Affected: 330,198 Manufacturer: General Motors LLCSUMMARY: General Motors LLC (GM) is recalling certain model year 2007-2008 Chevrolet Silverado 2500HD and 3500HD trucks manufactured November 28, 2006, to August 29, 2008, and 2007-2008 GMC Sierra 2500HD and 3500HD trucks manufactured November 27, 2006, to August 29, 2008.

GM plans to restart production in Mexico on May 20

MEXICO CITY — General Motors is tentatively planning to restart operations at its auto assembly plant in the Mexican city of Silao on May 20, according to a message to workers seen by Reuters on Sunday, as the car industry prepares to exit the coronavirus lockdown. Separately, the president of GM's Mexican unit advised suppliers to prepare to resume operations. “We are now beginning a new phase given the Mexican governmentÂ’s official announcement earlier this week to consider the transportation manufacturing industry as essential for the countryÂ’s economy,” Francisco Garza, president ofGeneral Motors de Mexico, wrote in an email to suppliers dated on Friday that was viewed by Reuters. The reopening of the plant  in Silao would be a positive signal for the auto sector in North America, whose supply lines are highly interconnected between the United States, Mexico and Canada. The plant in the central state of Guanajuato has been idled for weeks due to the coronavirus outbreak. Workers had previously been told to plan to return to their jobs on May 18. A GM spokeswoman said the company could not confirm when it would restart operations at any of its facilities in Mexico because it is awaiting more guidance from the government. The message to the plant's workers came after the government on Friday clarified when the industry could begin easing restrictions imposed because of the health emergency. On Wednesday, the government said automakers could start going back into production from May 18. It then withdrew that advice and suggested the new start date would be June 1. Finally it indicated the sector, which forms the backbone of Mexican manufacturing, could begin operating as soon as next week if companies had the required safety measures in place. U.S. officials and its auto industry have pressed Mexico's government to get its factories open again because American operations depend heavily on parts from south of the border. However, some politicians are wary of opening too fast. Mexico registered its first case of coronavirus weeks after the United States and Canada and the toll of daily infections and deaths in the country reached new peaks over the past few days. The Silao production facility, which makes highly profitable pickup trucks for GM, is one of the biggest automotive plants in Guanajuato, a major Mexican carmaking state. Related Video:

Chevy's 6.6-liter Duramax is pretty much all new

To say there's a heated battle in heavy-duty pickups is an understatement, with Chevrolet, Ford, and Ram constantly trading blows of increased torque, horsepower, and towing capacity. The latest salvo is the revised, more powerful turbo diesel 6.6-liter Duramax V8 in the 2017 Chevy Silverado. It has 910 pound-feet of torque, an increase of 145, putting it nearly level with the Ford Super Duty. Here's a closer look at where those gains come from. How exactly did Chevrolet add all that torque plus 48 horsepower? The automaker essentially took a fine-tooth comb to the entire engine. Chevy says it changed 90 percent of the V8, and the cumulative effect of those small changes adds up to big increases. As you might guess, the turbocharger is updated. The larger unit features electric actuation of the variable nozzle turbine (VNT), and what Chevy calls a double axle cartridge mechanism that separates the VNT moving parts from the housing. That helps with heat performance as well, with a claim that the exhaust side of the turbo can run continuously up to 1,436 degrees Fahrenheit. Helping that cause are six exhaust gaskets made of Inconel - an nickel alloy that contains chromium and iron – and upgraded stainless steel for the exhaust manifold. Despite having the same cast iron cylinder block, albeit with some minor enhancements, the engine has new cylinder heads, pistons, piston pins, connecting rods, and crankshaft, which have all been upgraded to handle 20 percent higher cylinder pressures. Alongside the increase in pressure, Chevrolet also increased the cylinder head's structure with a honeycomb design. The pattern features high-strength aluminum with dual layer water jackets that not only improve strength, but also optimize water flow for better cooling. For 2017, the cylinder head also benefits from integrated plenum that aids the engine in getting more air under heavy loads. The cylinder head isn't the only component to get a minor update, as the pistons have a larger diameter pin for improved oil flow. The same detailed improvements has been bestowed to the humble connecting rods (second in our hearts only to the inanimate carbon rod). The new design has the bolts oriented roughly 45-degrees to the rod instead of parallel. The angle split design, as it's called allows for easier passage through the cylinder.