08 Black Lt1 Suv 4.2l Low Miles Cd Satellite Radio Dual Ac Hitch Keyless Entry on 2040-cars

Auto blog

Made in America | These cars top the most-American list

The car with the most American/Canadian content for 2022 is ... cue the drumroll ... the Lincoln Corsair, in both standard gasoline-fueled and plug-in hybrid guise. Both versions of Lincoln's compact luxury crossover earned a score of 86 — due to 72% of its parts coming from one of the two aforementioned countries — in the American University Kogod Business School's annual "Made in America Auto Index." Last year's leader, the 2021 Ford Mustang GT (when equipped with a manual transmission) fell all the way to 22nd place with a 50% rating due to a switch in transmissions sourced from Mexico. In case you're interested, that puts Ford's red-blooded American ponycar below vehicles like the Kia Sorento, Mercedes-Benz GLE-Class SUV and Lexus ES. If you're wondering how an American car that's assembled within the borders of the United States could rank below a model from a Korean, German or Japanese automaker, well, we'll let Kogod explain: "The components of the index are based on research performed by the Center for Automotive Research in Ann Arbor Michigan regarding the economic value of different components of auto manufacturing. For example, the highest ranked cars are made by U.S.-based manufacturers using American engines and transmissions, and with a high AALA percentage of U.S. and Canadian parts." There are 25 total vehicles listed in the Top 10 (there are lots of ties this year). Here's the full list: (1) Lincoln Corsair: 86 (1) Lincoln Corsair PHEV: 86 (2) Tesla Model 3 Long Range: 82.5 (3) Chevrolet Corvette Sting Ray: 81 (4) Chevrolet Colorado: 80.5 (5) Jeep Cherokee Latitude 4x4: 80 (5) Jeep Cherokee Trailhawk: 80 (5) Tesla Model 3 Performance: 80 (5) Tesla Model Y: 80 (6) Dodge Durango Citadel: 79.5 (6) Dodge Durango Blacktop AWD: 79.5 (7) Honda Passport Trailsport: 78.5 (8) Ford F-150 2.7L, 3.3L, 5.0L: 77.5 (8) Ford Ranger: 77.5 (8) Ford Bronco automatic: 77.5 (8) Tesla Model S: 77.5 (8) Tesla Model X: 77.5 (9) Jeep Grand Cherokee Laredo 3.6L: 77 (9) Jeep Grand Cherokee L LTD: 77 (9) Jeep Grand Cherokee Overland 3.6L: 77 (9) Chevrolet Camaro automatic: 77 (10) Honda Odyssey: 76 (10) Honda Ridgeline: 76 (10) Honda Pilot: 76 There's a whole long list of reasons for the above scores, with seven criteria that include factory location, headquarters location and where its various bits and pieces come from.

Bob Lutz builds the case for a mid-engined Corvette

Rumors of a mid-engine Corvette are like automotive industry folklore at this point. Every once in a while, news pops up that it might be happening or is under development, but nothing actually ever comes to fruition as something people can actually buy. The latest spy shots strongly suggest a mid-engine 'Vette is in the cards, yet again, possibly for 2018. Now, an op ed by former General Motors executive (and definite performance car fan) Bob Lutz in Road & Track gives the inside scoop on the history of one of these proposals and lays out how to make it happen today. According to Lutz, the company's engineers believed the C6 ZR1 was at the limit for front-engine, rear-wheel drive performance in that package, and the only solution was to move the powerplant behind the driver. Lutz even got then CEO Rick Wagoner on board. The scheme made it at least as far as clay models for mid-engine versions of the 'Vette and Cadillac XLR. Eventually, a lack of money got in the way, though, bringing the project to an end. Lutz puts a lot of faith in GM's current leaders, especially Mary Barra and Mark Reuss. He thinks the chances of a mid-engine 'Vette happening this time are better than 50 percent. The model, rumored to be named Zora, could offer over 700 horsepower in an ultra lightweight body and be priced at about $120,000 to "suck the doors off everybody." Head over to Road & Track to get some insights from this highly respected and entertaining auto industry veteran. Related Video:

Chevy's 6.6-liter Duramax is pretty much all new

To say there's a heated battle in heavy-duty pickups is an understatement, with Chevrolet, Ford, and Ram constantly trading blows of increased torque, horsepower, and towing capacity. The latest salvo is the revised, more powerful turbo diesel 6.6-liter Duramax V8 in the 2017 Chevy Silverado. It has 910 pound-feet of torque, an increase of 145, putting it nearly level with the Ford Super Duty. Here's a closer look at where those gains come from. How exactly did Chevrolet add all that torque plus 48 horsepower? The automaker essentially took a fine-tooth comb to the entire engine. Chevy says it changed 90 percent of the V8, and the cumulative effect of those small changes adds up to big increases. As you might guess, the turbocharger is updated. The larger unit features electric actuation of the variable nozzle turbine (VNT), and what Chevy calls a double axle cartridge mechanism that separates the VNT moving parts from the housing. That helps with heat performance as well, with a claim that the exhaust side of the turbo can run continuously up to 1,436 degrees Fahrenheit. Helping that cause are six exhaust gaskets made of Inconel - an nickel alloy that contains chromium and iron – and upgraded stainless steel for the exhaust manifold. Despite having the same cast iron cylinder block, albeit with some minor enhancements, the engine has new cylinder heads, pistons, piston pins, connecting rods, and crankshaft, which have all been upgraded to handle 20 percent higher cylinder pressures. Alongside the increase in pressure, Chevrolet also increased the cylinder head's structure with a honeycomb design. The pattern features high-strength aluminum with dual layer water jackets that not only improve strength, but also optimize water flow for better cooling. For 2017, the cylinder head also benefits from integrated plenum that aids the engine in getting more air under heavy loads. The cylinder head isn't the only component to get a minor update, as the pistons have a larger diameter pin for improved oil flow. The same detailed improvements has been bestowed to the humble connecting rods (second in our hearts only to the inanimate carbon rod). The new design has the bolts oriented roughly 45-degrees to the rod instead of parallel. The angle split design, as it's called allows for easier passage through the cylinder.