1993 4x4 2 Door K-5 Blazer (tahoe) on 2040-cars

Auto blog

2016 Chevy Volt will start at $33,995*

One of the biggest mysteries regarding the 2016 Chevy Volt has been revealed. Chevy announced today that the next-gen plug-in hybrid will have an MSRP of $33,995, which includes GM's $825 destination fee. That's a few hundred dollars less than the current Volt, which has an MSRP of $34,170. The second-gen Volt is about more than a price cut, though. The car has an increased all-electric range (50 miles vs. 38 in the current model) and better fuel economy. Once the battery power runs out – which it doesn't do, in most situations, since 90 percent of all trips are electric-only – the no-longer-premium-only gas engine offers 41 miles per gallon, up from 37 mpg. We know most buyers are price-conscious, and with the still-available federal tax incentive of up to $7,500, the new Volt can be had for $26,495. That should put a spring back into sluggish Volt sales, which are down 46 percent year-over-year so far in 2015. Through the end of April, GM has sold a cumulative 76,136 first-gen Volts since introducing the car in 2010. Chevrolet Announces 2016 Volt Pricing Next Gen delivers more technology at new price as low as $26,495 DETROIT – The Chevrolet Volt is poised to continue to bring new owners to the electric plug-in family. Pricing will be as low as $26,495 after the full federal tax credit of $7,500. (Federal tax credit can range from $0 up to $7,500.) In California, the vehicle's largest market, residents of the state will be able to purchase the all-new Volt for as low as $24,995 after state and Federal incentives. The 2016 model will start at $33,995 MSRP, including an $825 destination fee (excluding tax, title, license and dealer fees). This is almost $1,200 less than the current generation Volt. "The next generation Chevrolet Volt delivers more technology, the ability to drive further between gas fill ups and now with even more value to our customers. It's what our loyal Volt owners told us they wanted," said Steve Majoros, Director, Chevrolet Marketing. "We are confident we will continue to attract new customers to Volt with the vehicle's product improvements and attractive price." The Volt continues to be a success with the brand with nearly 70 percent of Volt owners trading in a non-GM product or adding to their household fleet in 2014, the highest of any Chevy nameplate. The number one trade-in for the Volt is the Toyota Prius. To date more than 75,000 first generation Volt owners have driven hundreds of millions of EV miles.

2016 Camaro gets most revealing tease yet

Chevrolet started its long teaser campaign for the 2016 Camaro by just revealing the exhaust manifold and front frame, but as time has passed the company has slowly unveiled more. In the latest glimpse ahead of the pony car's May 16 debut, we're actually getting to see the model's profile completely undisguised. As suggested by the recent tease of the rear and hood, the 2016 Camaro wears a sharper, more angular design than the current model. This is especially the case when you look at the taut lines making up the rear. Chevy claims that the new shape underwent 350 hours of wind tunnel tests to be able to generate left lift, improve cooling and reduce wind noise in the cabin. A smooth underbody pan is among the aerodynamic tweaks, and it runs from underneath the front grille to the center of the Camaro. Chevy asserts that all of the changes at the front help reduce lift by 30 percent. Related VIdeo: 2016 Camaro is all about the Aero Total aerodynamic lift improved by 30 percent for improved stability 2015-05-11 DETROIT – After 350 hours of wind tunnel testing – often 24 hours a day – the new Camaro will slip more easily through the wind, and drivers of the Camaro SS will experience a marked improvement in reduced aerodynamic lift. These changes illustrate the lengths the aerodynamics team went to for improved performance, stability, cooling and lower wind noise intrusion "The importance of aerodynamics increases exponentially as we increase vehicle performance," said Kirk Bennion, Exterior Design manager. "As engine output increases, we need more engine cooling. As acceleration and top speeds climb, we need to reduce lift for better high-speed stability. However, we cannot make any changes at the expense of increasing drag, which can hurt fuel economy. "To balance these different aerodynamic targets, we tested literally hundreds of changes on the new Camaro, millimeters at a time." For example, the initial design called for the lower grille bars to be set at a 20-degree angle to the horizon. However, after meticulous testing, the team improved engine-cooling airflow by 1 percent by shifting the angle to 13 degrees – a change that achieved the airflow target while maintaining the original grille design. And rather than a traditional front air dam to reduce aerodynamic lift, the team developed a flush belly pan that stretches from the front grille to the center of the vehicle.

GM patent reveals new two-stage turbocharger

Modern turbochargers may be some of the best ever made, but performance is something that engineers are always trying to improve. According to GM Inside News, General Motors (GM) is hoping to alleviate some of the negative aspects of a two-stage turbocharger setup with a newly-patented design. The patent, that was filed on May 19, 2016, reveals a clever bypass system that allows the engine, a four-cylinder unit, to optimize both the low-pressure and high-pressure inlets for its respective functions. According to the filing, a conventional two-stage turbocharger setup is engineered to allow both turbines to operate simultaneously at low and mid engine speeds. At high engine speeds, only the low-pressure turbine works. The setup can't isolate either the low or high pressure side, which can impair low-end performance. GM's new two-stage turbocharger setup looks to eliminate this by linking the high-pressure turbo to the exhaust manifold through the high-pressure inlet duct. The low-pressure turbo is attached to the high-pressure turbo by a low-pressure inlet duct, which is linked to a connecting channel. A single actuator that is housed in the exhaust manifold creates a bypass that can opens the high-pressure inlet or close the connecting channel. Depending on what the engine load and speed is, the ECU guides the actuator—a single rotating spindle with discs corresponding to flanges on the high and low pressure sides—to isolate one of the two turbos. Isolating the turbos allow the respective inlets to be engineered for the best possible fluid dynamic performance. The setup should increase performance and decrease lag. There's no word on what car this setup will make an appearance on, but it will most likely be used in premium vehicles before trickling down to the rest of GM's vehicles. Related Video: News Source: GM Inside News, AutoGuide via GM Authority Cadillac Chevrolet GM Technology Sedan turbo patent engine turbocharging