2003 Chevrolet Ssr Base Convertible 2-door 5.3l on 2040-cars

Auto blog

Chevy Volt replacement battery cost varies wildly, up to $34,000

There's a growing hubbub in the plug-in vehicle community over what looks like some ridiculously cheap replacement batteries for the Chevrolet Volt going up for sale. GM Parts Online, for example, is selling a replacement Volt battery with an MSRP of $2,994.64 but, with an online discount, the price comes down to $2,305.88. For the 16-kWh pack in the 2012 Volt, that comes to a very low $144.11 per kilowatt hour (kWH). But is it a real deal? How can it be, when a Chevy dealer may quote you a price of up to $34,000 to replace the pack? For a 16-kWh Volt pack, $2,305.88 comes to a very low $144.11 per kWh. But is it a real deal? Battery packs in alternative propulsion vehicles are usually priced by the kWh and, historically, they've been thought to be in the range of $500-per-kWh for OEM offerings. Since automakers are understandably secretive about their costs, we still don't know what the real number is today, but we do know it varies by automaker. Tesla, for example, has said it pays less than $200-per-kWH at the cell level but, of course, a constructed pack would be more. Whatever is going on, li-ion battery prices are trending downward. So, $144.11 certainly sounds great, but what's the story here? Kevin Kelly, manager of electrification technology communications for General Motors, reminded AutoblogGreen that GM Parts Online is not the official GM parts website and that, "the costs indicated on the site are not what we would charge our dealers or owners for a replacement battery. There would be no cost to the Volt owner if their battery needs replacement or repair while the battery is under the eight year/100,000 mile limited warranty coverage provided by Chevrolet." A single price tag also can't be accurate for everyone, Kelly said. "If the customer needs to have their battery repaired beyond the warranty, the cost to them would vary depending on what needs to be replaced or repaired (i.e. number of modules, which specific internal components need replacement, etc.)." he said. "So, it's hard for us to tell you exactly what the cost would be to the customer because it varies depending on what might need to be repaired/replaced. As a result, the core charge would vary." But, is the $2,300 price even accurate for anyone? Thanks to a reader comment, we see that this similar item on New GM Parts makes it look like the lithium-ion modules that Kelly mentioned – where a lot of the expensive bits are – are not included.

1956 Corvette SR-2 factory racer profiled

The Chevrolet Corvette has earned its place as America's sports car, capable of taking on the best the world can throw at it. Much of that winning reputation was earned with victories on the track. Now, there was a chance to own an early piece of the nameplate's motorsport history in the form of a 1956 Corvette SR-2 racer, but some deep pockets were necessary to get it, with an estimate of $6.885 million. The story behind the SR-2 is fascinating. In 1956, famous General Motors designer Harley Earl's son was racing in a Ferrari. Obviously, that wasn't going to work given his father's position within the automaker, and Harley and Corvette engineer Zora Arkus-Duntov got to work on a faster racecar. Three were made. This one was reportedly the first, and for 1957 it also received a fuel-injected V8 making a claimed 331 horsepower and four-speed manual gearbox, according to "Corvette Mike," the owner and seller. The SR-2 went on display in Scottsdale, AZ appropriately timed to coincide with the big Barrett-Jackson auction there that wrapped up this weekend. The car wasn't part of that event; instead marque specialist Mike Vietro sold the racer as a private treaty sale. Company spokesperson Troy Worrell told Autoblog both the bids and identities of the bidders will remain undisclosed. The video above goes into even deeper detail about this rare, finned Vette or check out the car's full description for even more info.

GM removes start/stop from full-size trucks and SUVs with V8 engines

GM is removing start/stop technology from a number of its popular full-size SUVs due to the ongoing chip shortage. This follows the removal of cylinder deactivation technology from some of its trucks, which was also due to the chip shortage. GM Authority first reported the news, but we’ve just confirmed everything with a GM spokesperson.  The following 2021 model year vehicles will be affected: Chevy Tahoe, Chevy Suburban, GMC Yukon, Cadillac Escalade, Chevrolet Silverado 1500 and GMC Sierra 1500. Only versions of those vehicles built with the 5.3-liter V8 or 6.2-liter V8 and mated to the 10-speed automatic will have the tech removed from them. Only vehicles manufactured on or after June 7 will be affected. “By taking this measure, it will enable us to continue production of our high-demand full-size SUV and pickups as the industry continues to rebound and strengthen,” GM said in a statement. Those who ultimately buy one of these vehicles without start/stop technology will receive a $50 discount off MSRP for their troubles. Losing this fuel-saving tech could be a big negative for some, but we know many folks turn it off anyway. Not having to press the button to deactivate start/stop every time could actually be a positive if youÂ’re part of the camp who does that already. 2021 Cadillac Escalade Sport Platinum View 27 Photos On the downside, GM says “most of the affected vehicles will experience a minor reduction in fuel economy.” We donÂ’t have revised window stickers in hand to know how each model will be affected, but any 1 mpg reduction will be rather impactful for vehicles rated as low as these trucks already are. Any reduction will be seen in the city mpg rating, so take the kind of driving youÂ’re going to be doing into account before purchasing. When it comes to greenhouse gas compliance rules, GM says it doesnÂ’t foresee this impacting the companyÂ’s average fleet score. It also intends to begin adding start/stop back to these models as soon as possible, but there will be no retrofit effort made to fit the tech to vehicles already built without it. “Our supply chain organization continues to make strides working with our supply base to mitigate the near-term impacts of the semiconductor situation,” GMÂ’s statement reads. “GM continues to leverage every available semiconductor to build and ship our most popular and in-demand products, including our highly profitable full-size trucks and SUVs for our customers.