Work Truck 6.0l 4x4 Power Steering Abs 4-wheel Disc Brakes Steel Wheels A/c on 2040-cars

Auto blog

GM recalls nearly 1 million vehicles for airbag defect

WASHINGTON — General Motors said on Friday it will recall nearly 1 million sport utility vehicles in the United States because the driver's airbag inflator may explode during deployment. The recall covers 994,763 Buick Enclave, Chevrolet Traverse, and GMC Acadia vehicles from the 2014 through 2017 model years with modules produced by ARC Automotive Inc. Dealers will replace the driver's airbag module. The National Highway Traffic Safety Administration said a driver in Michigan of a 2017 Chevrolet Traverse was in a crash in which the front-driver airbag inflator ruptured during deployment causing facial injuries. An April 25 inspection confirmed that the front driver airbag inflator ruptured in the vehicle. The National Highway Traffic Safety Administration (NHTSA) demanded the recall of 67 million air bag inflators because it believes there is a safety defect, but auto supplier ARC Automotive Inc rejected the U.S. regulator's request, documents released on Friday show. The auto safety agency said the inflators pose an unreasonable risk of death or injury. Even as ruptures mount, "ARC has not made a defect determination that would require a recall of this population," NHTSA said in its demand letter to the Tennessee-based company. "Air bag inflators that project metal fragments into vehicle occupants, rather than properly inflating the attached air bag, create an unreasonable risk of death and injury." GM said it was still investigating the issue with the assistance of a third-party engineering firm. "GM is taking this expanded field action out of an abundance of caution and with the safety of our customers as our highest priority," the Detroit automaker said. GM said it was aware of two prior ruptures of ARC-manufactured airbag inflators in 2015 Chevrolet Traverse vehicles, and GM conducted two earlier small recalls of about 3,000 ARC inflators. All three rupture events in Chevrolet Traverse vehicles involved the same inflator variant. ARC noted in a letter made public Friday that no root cause for those ruptures has been identified by ARC or GM. ARC said it was assessing the scope of GMÂ’s recall.  Government/Legal Recalls Buick Chevrolet GMC Safety Crossover SUV

Is the skill of rev matching being lost to computers?

If the ability to drive a vehicle equipped with a manual gearbox is becoming a lost art, then the skill of being able to match revs on downshifts is the stuff they would teach at the automotive equivalent of the Shaolin Temple. The usefulness of rev matching in street driving is limited most of the time – aside from sounding cool and impressing your friends. But out on a race track or the occasional fast, windy road, its benefits are abundantly clear. While in motion, the engine speed and wheel speed of a vehicle with a manual transmission are kept in sync when the clutch is engaged (i.e. when the clutch pedal is not being pressed down). However, when changing gear, that mechanical link is severed briefly, and the synchronization between the motor and wheels is broken. When upshifting during acceleration, this isn't much of an issue, as there's typically not a huge disparity between engine speed and wheel speed as a car accelerates. Rev-matching downshifts is the stuff they would teach at the automotive equivalent of the Shaolin Temple. But when slowing down and downshifting – as you might do when approaching a corner at a high rate of speed – that gap of time caused by the disengagement of the clutch from the engine causes the revs to drop. Without bringing up the revs somehow to help the engine speed match the wheel speed in the gear you're about to use, you'll typically get a sudden jolt when re-engaging the clutch as physics brings everything back into sync. That jolt can be a big problem when you're moving along swiftly, causing instability or even a loss of traction, particularly in rear-wheel-drive cars. So the point of rev matching is to blip the throttle simultaneously as you downshift gears in order to bring the engine speed to a closer match with the wheel speed before you re-engage the clutch in that lower gear, in turn providing a much smoother downshift. When braking is thrown in, you get heel-toe downshifting, which involves some dexterity to use all three pedals at the same time with just two feet – clutch in, slow the car while revving, clutch out. However, even if you're aware of heel-toe technique and the basic elements of how to perform a rev match, perfecting it to the point of making it useful can be difficult.

GM forced to cut truck production amid semiconductor shortage

WASHINGTON — General Motors said Wednesday it will cut some truck production in North America because of the ongoing global semiconductor shortage. The largest U.S. automaker said its Flint Assembly plant that builds the Chevrolet Silverado HD and GMC Sierra HD trucks will operate on one production shift the week of July 26. GM said its Ft. Wayne Assembly plant in Indiana that builds the Chevrolet Silverado 1500 and GMC Sierra 1500 model trucks will be idled next week. GM's Silao Assembly plant in Mexico that also builds the Chevrolet Silverado 1500, Cheyenne (for the Mexico market) and GMC Sierra 1500 will also suspend production next week. All three plants are expected to resume regular production the week of August 2. Related video: