2002 Silverado 2500 Diesel 4x4 Long Bed on 2040-cars

Auto blog

Want a V8 on the cheap? Buy a work truck

In case you didn't notice, V8 cars have gotten pretty expensive. If you want a modern muscle car like the Dodge Challenger R/T, Ford Mustang GT, or Chevy Camaro SS, you'll need between $34,000 and $38,000 for a stripped out example of one. The cheapest of those is the Challenger, and the priciest is the Camaro. These are also the cheapest V8 cars the companies offer. But if you absolutely have to have a V8 for less, there is an option, work trucks. As it turns out, all of the Big Three offer their most basic work trucks with V8s. And because they're so basic, they're pretty affordable, especially when sticking with the standard two-wheel drive. A Ram 1500 Tradesman with a V8 can be had for as little as $29,840, which is a little more than $4,000 less than a Challenger R/T. For a bit more at $30,275, you can have a Chevy Silverado W/T, almost $8,000 less than a Camaro SS. The most expensive is the V8 Ford F-150 starts at a starting price of $30,670, which is a bit over $5,000 less than the Mustang. Of course you'll be in an ultra bare bones vehicle with few comforts, and the price will go up if you add stuff, but we're bargain hunting here, and sacrifices are sometimes necessary. Besides, what you lose in comfort, you gain in loads of cargo space and towing (try to look at the bright side). Also, as a side note, all three trucks are available with optional electronic locking rear differentials. At the discounted price of these trucks, you still get a heaping helping of power. The most potent of the trio is the Ram 1500 Tradesman with 395 horsepower and 410 pound-feet of torque generated by a 5.7-liter V8. Compared with the Challenger R/T, the Ram is up by 20 horsepower and they're tied for torque. The value proposition is even more stark between the two vehicles when looking at the price per horsepower. Each pony in the Ram costs $75.54, while the Challenger charges you $90.91. The Challenger is also more expensive per horsepower than its close competitors. The F-150's 5.0-liter V8 is just barely behind the Ram with 395 horsepower and 400 pound-feet of torque. That's still more power than the Challenger, and it matches the torque of the 2017 Mustang GT. On the down side, it still would be down 20 horsepower on that same 2017 Mustang, and it's behind by 60 horsepower and 20 pound-feet on the new 2018 Mustang GT. The F-150 also just edges out the Mustang in the dollar per horsepower measure.

With only 246 Volts sold in Australia, Holden not getting next-gen model

The Chevrolet Volt has not been the resounding success General Motors hoped for here in the United States. But it's fortunes in Chevy's home country are nothing compared to how poorly it's done down under. Only 246 Volts have been sold in Australia, where the car is branded as a Holden, since its debut in 2012. That's not just a bad showing – it's an absolute disaster. According to Motoring.com.au, it was the Volt's astonishing $60,000 price tag, combined with a lack of interest from Aussie drivers, that killed the car's chances. What's fascinating about this development, though, is that it doesn't necessarily seem to be Holden that's pulling the plug. Instead, it's the Volt's Hamtramck, MI factory, which is preparing to shift into production of the second-generation model that seems to be taking the blame. According to Motoring, the plant confirmed that it will only build the Gen 2 plug-in in left-hand-drive form, basically ruling out a model for Australia. "Electric and hybrid vehicles haven't taken off in Australia," Holden's director of communications, Sean Poppitt, told Motoring. "Considering the lack of infrastructure, the lack of government incentives, the large distances between cities, it's a tough sell." The death of the right-hand drive Volt won't be the only loss of business in Hamtramck. Opel has already confirmed that it will drop the plug-in's European fraternal twin, the Ampera, while the next-gen Chevy won't make the trip across the pond either. Related Video:

Chevy Colorado gets box delete option designed for upfitters

The Colorado, which marks the return of Chevrolet to the midsize truck segment, is receiving critical praise, and now it's time for the pickup to get to work. At the National Truck Equipment Association Work Truck Show in Indianapolis, IN, Chevy is unveiling a box delete option package for the model that allows businesses to custom tailor the Colorado to their needs. The choice to remove the bed is exclusively available on the Colorado Work Truck trim in the rear-wheel drive, extended cab model with a 305-horsepower, 3.6-liter V6 and six-speed automatic gearbox, and Chevy claims this is the only option of its type in the segment. Beyond the obvious loss of the rear, these trucks feature eight mounting points on the frame for upfitters to install any necessary modifications. They also get the Z82 trailering package and a locking differential. The versions with the box delete package carry a payload rating of 2,200 pounds an a gross vehicle weight rating of 6,001 pounds. "It's ideal for utility companies requiring service bodies, as well as landscapers and other businesses needing the utility of a flatbed," Ed Peper, US Vice President for General Motors Fleet and Commerical, said in the option's announcement. Further options with the package are limited to choosing a repositioned fuel filler for the upfitter to install and deleting the rear seat for extra interior capacity. The box delete becomes available in mid-April, and buyers get a $300 credit off the price of the Colorado when it's selected. Colorado 'Box Delete' Expands Options for Businesses Chevrolet package offers unique midsize pickup platform for alternative uses 2015-03-04 INDIANAPOLIS – With a box delete option, business owners and fleet managers can have it their way when it comes to customizing the back end of the 2015 Chevrolet Colorado. Chevrolet today announced availability of the package in mid-April. It is on display this week at the annual National Truck Equipment Association Work Truck Show in Indianapolis. It is the only such option offered in the midsize truck segment. "With the segment-leading efficiency and maneuverable size, the Colorado makes a great, flexible choice for urban businesses and fleets to make the most of a midsize truck," said Ed Peper, U.S. vice president, GM Fleet & Commercial.