04 Chevy 2500 Hd Duramax Diesel Allison 1 Owner 94k Mi Net Direct Auto Sales on 2040-cars

Auto blog

Chevy Bolt-based prototype may be a Buick EV for China

Late last spring, we got a look at a GM prototype that was clearly based on the Chevy Bolt EV, but with updated styling. It seemed like it could be a more crossover-styled Bolt, given the recently trademarked name of EUV. Now we get another look at the prototype, but the bodywork seems less suggestive of a Chevy, and more of a Buick. This vehicle definitely still appears to be based on the Bolt, rather than on another small GM platform. In the photos of it next to the current model, the size, wheelbase and profile are extremely similar. There are differences, though. The nose isn't as sloped or as rounded, and the rear window kicks up a little earlier. The biggest changes are in the front and rear fascias, and it's here that we see hints of Buick. There are prominent air inlets on each side of the front bumper that give the car a more aggressive look. The headlights still have a fairly rounded, organic look, but with little extensions like fangs underneath. The styled running-light section, rounded shape and the smoked lenses seem very Buick-like. The grille features a large badge that doesn't fit the shape of a bow-tie, and is more that of a round logo like Buick's. Around at the back, the full-width taillights stand out, and in the middle there is obviously a round badge, again like a Buick. The wide taillights would also be a natural evolution of Buick's current light design language that uses somewhat wide and thin lights. The rear bumper has been redesigned with new lower taillights. Now that we've established that this seems very much like a Buick, we don't think we'll see this particular version offered here with the badge. This is more likely a Buick version of the Bolt for the Chinese market, where the brand is associated with luxury and has been the spearhead for GM's electric and hybrid models. In fact, the Chevy Volt hybrid was sold there as the Buick Velite 5, which was part of a family of a electrified Velite models. This would probably also carry a Velite badge as well. While we might not see this specific Buick variant, we probably will see it offered as a Chevy in some form. With its more aggressive, crossover shape, it could be the rumored EUV model. Or it could be just a refresh of the current Bolt, since the model has been largely unchanged since its introduction for the 2017 model year. And extrapolating from this prototype, we can see how the headlights could be tweaked to tie into those air scoops as on the Suburban and Silverado.

Chevy Sail 3 lands in China

Shanghai General Motors took 32 cars to this year's Guangzhou Motor Show, with its Chevrolet Sail 3 leading the way. After putting almost 1.4 million of them into Chinese hands, the third generation of the Bowtie's entry-level sedan wants to "take the nameplate and the segment to a new level." Its new architecture sporting a 1.4-inch longer wheelbase supports a growth spurt of two inches in length and 1.8 inches in width. The exterior also gets "eagle eye-shaped" headlights and "dual-c-element taillights." Under the hood will be either a 1.5-liter DVVT or a 1.3-liter VVT, each of them more powerful and more frugal than previous offerings. Both can be paired with a manual or an automatic transmission, and qualify for listing in China's National Energy-Saving and Eco-Friendly Vehicle Catalogue, as well as a 3,000 renminbi rebate ($490 US). You can read more about it in the press release below, and get more info on the Chevrolet Camaro RS Limited Edition, Corvette Stingray Coupe, Buick Regal GS and Excelle XT also introduced at the show. Chevrolet, Buick and Cadillac Take Center Stage at Guangzhou Auto Show - New Chevrolet Sail 3, Camaro RS Limited Edition and Corvette Stingray Coupe make China debut - Buick showcases customized Regal GS and Excelle XT - Shanghai GM announces new telematics strategy featured in upcoming Cadillac product GUANGZHOU, 2014-11-20 – Shanghai GM is displaying 32 vehicles from the Chevrolet, Buick and Cadillac brands at the 12th Guangzhou International Auto Show, which begins today and runs through November 29 in Guangzhou. Among the products that are making their China debut are the third-generation Chevrolet Sail 3, Chevrolet Camaro RS Limited Edition and Chevrolet Corvette Stingray Coupe. In addition, Buick is showcasing a customized Regal GS and Excelle XT, and Shanghai GM is announcing its new telematics strategy that will be featured in an upcoming Cadillac product next year. Chevrolet Sail 3 Entry-Level Family Car Since its introduction 15 years ago, the Sail has been a driving force in the entry-level family car segment. Nearly 1.4 million Sails have been sold across China. The third-generation Chevrolet Sail, named the Sail 3, will take the nameplate and the segment to a new level when it goes on sale nationwide by the end of this year. Built on Shanghai GM's new-generation small car architecture, the Sail 3 has adopted Chevrolet's new design language. It has a sculpted yet slim exterior with a youthful, dynamic feel.

The 2021 F-150 elevates Ford's bed game

The new 2021 Ford F-150 is ushering in a new era of pickup capability, but there's more to it than the introduction of the PowerBoost hybrid. While that new powertrain is certainly the truck's headlining element, the supporting electrical architecture enables a level of utility that hasn't been offered in past consumer half-tons. The true party trick is Ford's new "Pro Power Onboard" feature, which is essentially a built-in generator that provides juice for the 2021 F-150's rather robust in-bed power station. This system is available even on gasoline-engine models, but its utility is maximized with the electrified powertrain. ICE models equipped with the option max out at 2.0 kilowatts, while the PowerBoost hybrid can be had with either a 2.4- or a whopping 7.2-kilowatt inverter.  The idea here is that the F-150 can essentially stand in for a high-output portable generator. In a worksite example provided by Ford, a PowerBoost model with the 7.2-kW upgrade and a single tank of fuel could provide 32 hours of power for an 1,800-watt compound miter saw, a 1,000W circular saw, a 1,200W battery charger, a 1,200W hammer drill, and a 1,000W air compressor with hundreds of watts to spare for lighting and other accessories. But even without the Pro Power Onboard option, Ford's new bed setup enables more versatility than in previous models. The new Tailgate Work Surface option adds a flat work area with integrated rulers, recesses for pencils or small tools, and even a stand for a personal device.  Ford is neither the first to offer an auxiliary power outlet in a half-ton pickup bed, nor was Ford the first to introduce a more feature-rich tailgate. GMC's MultiPro tailgate was a major innovation on that front, and while it is geared mostly toward improving the cargo utility of the bed, it can also be customized with 12-volt power and even an accessory speaker system. The Ram 1500 is also offered with both a multi-function tailgate and AC power in the bed, though the latter option is limited to models with the RamBox cargo package.  As half-ton pickups approach levels of towing and hauling capability that begin to blur lines with heavy-duty offerings, it's clear that automakers are looking for ways to differentiate themselves without stepping on their own bigger trucks' toes. These new bed and tailgate innovations may yet be the tip of the iceberg when it comes to full-size pickup versatility. Related Video: