00 Chevy Silverado 2500 on 2040-cars

Auto blog

2016 Chevrolet Spark lights up New York

The little Spark has been somewhat of a surprising entry in the modern Chevy lineup in the US. Given its diminutive stature, you might have expected the slightly larger Sonic to cannibalize the tiny sibling's sales, but that hasn't happened. The Bowtie moved 39,159 Sparks in the US in 2014, a 14.7 percent boost from the previous year. Now at the 2015 New York Auto Show, the latest generation is being unveiled with a new engine and much improved styling. Replacing the current 1.2-liter four-cylinder is an all-aluminum 1.4-liter unit making 98 horsepower. That still doesn't sound like much, but it's 16 percent more than the 2015 Spark. The new mill can be connected to either a five-speed manual or a continuously variable transmission with which Chevy estimates 40 miles per gallon highway fuel economy. The 2016 Spark also gets a longer wheelbase and 1.6-inch lower overall height. Combined with more elliptical headlights at the front, the changes make for a somewhat more sleek appearance than the current, boxy model. The platform underneath is more rigid as well, and Chevy claims the latest underpinnings mean better handling and lower NHV levels inside. The little hatch isn't growing up too much, though, and gets a trio of new colors that sound like jellybean flavors: Toasted Marshmallow, Kalamata and Splash. Chevy is packing the interior with better quality materials and improved tech. Chevy's latest seven-inch MyLink system sits in the center stack with a capacitive touchscreen, and it now comes with a physical volume control and other buttons for easier use. All models also get a rearview camera, and a LCD instrument cluster remains in front of the driver. The available suite of safety systems includes Forward Collision Alert, Lane Departure Warning and Side Blind Spot Alert. The 2016 Spark goes on sale in the US in the fourth quarter of 2015 and is produced in South Korea. Expect a gallery showing off all its new styling from the New York show floor soon.

Driving Granatelli's turbine-powered 1978 Chevy Corvette [w/video]

With its curvy snout and feminine haunches, the third-gen Chevrolet Corvette looks like a dreamy – if dated – exemplar of Sports Car Fantasy 101 when viewed through modern eyes. This particular specimen circa '78, clad in silver and black paint with red pinstripes, appears to be a well-preserved example from the era. Apart from its low-profile Pirellis, slightly raised and slotted hood, spacious stance and a certain hand-painted descriptor alongside its crossed flag logos, you'd never guess there's a Space-Age propulsion unit powering this Coke bottle-bodied ride. Climb inside, and you're presented with aircraft gauges and big, colorful square buttons in the center panel. It takes a push of the "Ignitor" button, a tap of the starter button, and a slide of a T-handle for this nearly 40-year-old sports car to start sounding like Gulfstream G650 ready for takeoff. Yep, you're sitting in an 880-horsepower, turbine-powered Corvette, the only one of its kind in the world. Welcome to the whoosh. What The...? Built by Vince Granatelli, son of Indy 500 guru Andy Granatelli, this curious Corvette came into being by cramming a Pratt & Whitney ST6N-74 gas turbine engine into the donor car's lengthy front end. The same type of Jet A-burning mill powered Granatelli Senior's STP-sponsored racecar at the 1967 Indianapolis 500, where it famously led most of the 198 of 200 laps until a $6 transmission bearing failed, knocking it out of the race. The idea of turbine power usurping internal combustion was so threatening that Indy's governing body restricted turbine performance into obsolescence thereafter. A turbine-powered Corvette sounds excessive because it is. But there are also things about this 880-horsepower, 1,161-pound-feet monster that might surprise you. While it smacks of futurist exoticism and cost a then-dizzying $37,000 in 1967, the Canadian-built powerplant uses 80 percent fewer parts than an internal combustion V8 and will run on virtually anything combustible – whiskey, diesel, even Chanel No. 5. Though it's triple the length of a V8, the Pratt & Whitney beast weighs only 285 pounds. It's also one hell of a robust workhorse, typically serving as an auxiliary power unit for commercial aircraft or a generator in oil fields, where it can run for tens of thousands of consecutive hours before needing an overhaul. To adapt the Chevrolet for jet duty, the nose section was gutted and a sub-frame was built to compensate for the loosey-goosey front end.

2013 Chevy COPO Camaro announced with two new engines and manual option

Chevrolet is following up the 2012 COPO Camaro with another limited run of the drag-strip-ready production car for 2013. Ditching the superchargers, the 2013 COPO Camaro can only be equipped with one of three naturally aspirated V8 engines, and other new features include the option of a manual transmission, new front springs, some minor styling changes and a lower starting price of $86,000. All cars are designed to abide by the rules of the NHRA's Stock Eliminator or Super Stock classifications, depending on in which series buyers wish to enter their Chevrolet Camaro.
Returning for 2013 is the 427-cubic-inch V8 producing 425 horsepower, but the new engines include a 325-hp 350-CID V8 and a 375-hp 396-CID V8. Buyers can select to purchase all three engines, and each will be matched with the sequence number of that car; the track-only COPO cars will not have vehicle identification numbers and can't be registered for street use.
Chevrolet is also offering unique enthusiast-specific options such as a COPO Build Book and the opportunity for owners to help assemble their car's engine at the Chevrolet Performance Build Center in Wixom, MI.