Very Low Miles (52,000) 4 X 4 Chevy Truck V-8, New Stereo/cd Player, Tool Box on 2040-cars

Auto blog

GM resumes production of its 3.0-liter turbodiesel straight-six

General Motors temporarily stopped taking orders for trucks and SUVs equipped with the 3.0-liter Duramax turbodiesel six-cylinder engine in August 2021 due to a supplier shortage. Reports claimed the pause would last through 2021, but the engine is already back in production. Enthusiast website GM Authority learned from sources inside General Motors that the straight-six is once again coming off the assembly line at the Flint Engine Plant in Flint, Michigan. There's no official word on precisely what the problem was linked to and whether it was related to the on-going chip shortage that's wreaking havoc across the automotive industry. All we know is that the pause lasted for about two weeks. Called LM2 internally, the six is available in Chevrolet's Tahoe, Suburban, and Silverado 1500 and in GMC's version of these trucks. It's also an option in the Cadillac Escalade. It develops 277 horsepower at 3,750 rpm and a V8-like 460 pound-feet of torque at 1,500 rpm in every application, and it allows these big behemoths to post surprising fuel economy numbers. Fitted to a rear-wheel-drive Tahoe, the Duramax returns 21 mpg in the city, 28 mpg on the highway, and 24 mpg in a combined cycle, figures that make it more efficient than a Blazer. Demand for the diesel-powered trucks is relatively high. While the shortage undoubtedly took a toll on sales, the Duramax represented 8% of Suburban sales and 6% of Tahoe sales in May 2021. There are no other diesel-burning full-size SUVs available new so they have the market to themselves. On the truck side, Ram still makes the EcoDiesel available on some 1500 trims but Ford abandoned the segment. Related Video: Featured Gallery 2021 Chevrolet Tahoe RST View 24 Photos Chevrolet GMC Truck SUV Diesel Vehicles

Want a V8 on the cheap? Buy a work truck

In case you didn't notice, V8 cars have gotten pretty expensive. If you want a modern muscle car like the Dodge Challenger R/T, Ford Mustang GT, or Chevy Camaro SS, you'll need between $34,000 and $38,000 for a stripped out example of one. The cheapest of those is the Challenger, and the priciest is the Camaro. These are also the cheapest V8 cars the companies offer. But if you absolutely have to have a V8 for less, there is an option, work trucks. As it turns out, all of the Big Three offer their most basic work trucks with V8s. And because they're so basic, they're pretty affordable, especially when sticking with the standard two-wheel drive. A Ram 1500 Tradesman with a V8 can be had for as little as $29,840, which is a little more than $4,000 less than a Challenger R/T. For a bit more at $30,275, you can have a Chevy Silverado W/T, almost $8,000 less than a Camaro SS. The most expensive is the V8 Ford F-150 starts at a starting price of $30,670, which is a bit over $5,000 less than the Mustang. Of course you'll be in an ultra bare bones vehicle with few comforts, and the price will go up if you add stuff, but we're bargain hunting here, and sacrifices are sometimes necessary. Besides, what you lose in comfort, you gain in loads of cargo space and towing (try to look at the bright side). Also, as a side note, all three trucks are available with optional electronic locking rear differentials. At the discounted price of these trucks, you still get a heaping helping of power. The most potent of the trio is the Ram 1500 Tradesman with 395 horsepower and 410 pound-feet of torque generated by a 5.7-liter V8. Compared with the Challenger R/T, the Ram is up by 20 horsepower and they're tied for torque. The value proposition is even more stark between the two vehicles when looking at the price per horsepower. Each pony in the Ram costs $75.54, while the Challenger charges you $90.91. The Challenger is also more expensive per horsepower than its close competitors. The F-150's 5.0-liter V8 is just barely behind the Ram with 395 horsepower and 400 pound-feet of torque. That's still more power than the Challenger, and it matches the torque of the 2017 Mustang GT. On the down side, it still would be down 20 horsepower on that same 2017 Mustang, and it's behind by 60 horsepower and 20 pound-feet on the new 2018 Mustang GT. The F-150 also just edges out the Mustang in the dollar per horsepower measure.

Sunday Drive: Tracking Tokyo's top performers

The big news of the week mostly came from Tokyo. All of Japan's biggest automakers made waves at the Motor Show, but the winner of the event has to be Mazda. The big Vision Coupe and little Kai Concept stole the show, won our hearts, and earned a ton of attention for the automaker. We can't wait to see how these two concepts impact the design, engineering, and technology of future production models. Take a look at our mega image gallery post below to see everything in high-resolution glory. Interestingly, the single biggest click-magnet of the 2017 Tokyo Motor Show was the BMW X2. We shouldn't be surprised. Crossovers of all shapes and sizes dominate the American marketplace, and the X2 is clearly the most attractive of BMW's even-numbered, coupe-influenced X models. Plus, it's headed for production, with sales starting in the spring of 2018. Moving past the Tokyo Motor Show, Autoblog readers are apparently very interested in the 2019 Chevy Camaro. Spy shots of just about every iteration of Chevy's muscle car lit up the 'net last week, leaving us very interested in seeing what's hiding behind all that camouflage. As always, tune in to Autoblog next week for a front-row seat to all the happenings worth following in the automotive industry. 2017 Tokyo Motor Show | Mega Gallery Mazda Vision Coupe | Tokyo Motor Show's big, sensuous 4-door Mazda Kai concept hints at a more muscular, refined Mazda3 2018 BMW X2 crossover revealed, adorned in gold and silver 2019 Chevrolet Camaro: 1LT, SS, ZL1 all spied with updated styling