2014 Chevrolet Silverado 1500 Ltz on 2040-cars

Auto blog

2017 Chevy Bolt charged up for production

Chevy's decision to call its new electric car the Bolt has stirred controversy and confusion, but regardless, it's well on its way to becoming a production reality. The prototype captured in these shots is heavily camouflaged, but the crossover/hatchback styling cues are still evident. The car also has a tall greenhouse, slight creases in the sides, and a sloping roofline in back. There's a rapidly rising body line that makes for less glass for rear passengers, but that's probably part of the camo. The Bolt is expected to arrive for 2017 and will be sold in all 50 states. The Chevy Bolt carries the promise of bringing EV technology to a broader audience. Chevy said the car will cost about $30,000 after possible tax incentives and could have a range of 200 miles. It will be assembled at General Motors' Orion Assembly factory north of Detroit. The Bolt will augment the plug-in hybrid Volt in Chevy's green fleet, and it will compete against vehicles like the BMW i3 and Nissan Leaf. Related Video:

GM patent reveals new two-stage turbocharger

Modern turbochargers may be some of the best ever made, but performance is something that engineers are always trying to improve. According to GM Inside News, General Motors (GM) is hoping to alleviate some of the negative aspects of a two-stage turbocharger setup with a newly-patented design. The patent, that was filed on May 19, 2016, reveals a clever bypass system that allows the engine, a four-cylinder unit, to optimize both the low-pressure and high-pressure inlets for its respective functions. According to the filing, a conventional two-stage turbocharger setup is engineered to allow both turbines to operate simultaneously at low and mid engine speeds. At high engine speeds, only the low-pressure turbine works. The setup can't isolate either the low or high pressure side, which can impair low-end performance. GM's new two-stage turbocharger setup looks to eliminate this by linking the high-pressure turbo to the exhaust manifold through the high-pressure inlet duct. The low-pressure turbo is attached to the high-pressure turbo by a low-pressure inlet duct, which is linked to a connecting channel. A single actuator that is housed in the exhaust manifold creates a bypass that can opens the high-pressure inlet or close the connecting channel. Depending on what the engine load and speed is, the ECU guides the actuator—a single rotating spindle with discs corresponding to flanges on the high and low pressure sides—to isolate one of the two turbos. Isolating the turbos allow the respective inlets to be engineered for the best possible fluid dynamic performance. The setup should increase performance and decrease lag. There's no word on what car this setup will make an appearance on, but it will most likely be used in premium vehicles before trickling down to the rest of GM's vehicles. Related Video: News Source: GM Inside News, AutoGuide via GM Authority Cadillac Chevrolet GM Technology Sedan turbo patent engine turbocharging

CNG Chevy Impala launch delay grows to a year

The 2015 Chevrolet Impala Bi-Fuel was announced in Washington D.C. in late 2013 by Dan Akerson and was supposed to be on sale by the summer of 2014. Capable of running on gasoline and compressed natural gas, the sedan was said to offer a novel solution at a time when gas prices were high. The vehicles still haven't arrived at dealers, though, and according to Automotive News, a quality issue has set back the launch even a few months more. Using a modified 3.6-liter V6 with hardened valves and valve seats, the Bi-Fuel Impala has separate tanks for gasoline and CNG that it can switch between on the fly. When running on the cheaper natural gas, the sedan was estimated to get 19 miles per gallon in the city and offer 150 miles of range, and the total driving distance was predicted at around 500 miles. The base price was set at $38,210, after the $825 destination charge. The only other major tradeoff was a smaller trunk to accommodate the extra fuel. However, the first shipments of the bi-fuel models now aren't expected until mid-July – about a year later than the scheduled launch. A memo to dealers obtained by Automotive News said the sedan "has been delayed by a second quality hold" to look at the CNG system. The exact details surrounding this problem haven't been released. "We have identified a solution to the delay and are working hard to implement it within the next few months," General Motors spokesperson Chad Lyons said to Automotive News. Around 200 Bi-Fuel Impalas have been made, but none are yet in the hands of customers. Dealers should be able to order 2016 model year examples starting in the third quarter of this year.