2014 Chevrolet Silverado 1500 Ltz on 2040-cars

Auto blog

Buick Encore, Chevy Trax earn Top Safety Pick from IIHS [w/video]

The Buick Encore has been a massive sales success practically from the moment it debuted, and Buick recently decided to increase production to keep up with demand for the premium compact crossover. The Insurance Institute for Highway Safety recently put one to the test again, and the Encore earned a Top Safety Pick award. It's the first model from the brand to score the nod since 2013, according to the IIHS, and the rating also carries over to the 2015 Chevrolet Trax. The 2015 Encore scored a Good rating in all of the IIHS' evaluations, including the 40-mile-per-hour, small overlap front crash test. That was a big improvement over the previous model the institute tested, which scored a Poor result in the overlap test. In the first test, about 13 inches of the lower door hinge pillar came into the passenger compartment, and the steering wheel airbag moved too far to protect the dummy's head. Improvements for the latest model year showed six inches of intrusion this time, and the airbags caught the dummy's head well. The dummy's sensors also indicated a low risk of injury. The two CUVs missed out on the full Top Safety Pick+ because the IIHS scored the Encore as only having a basic front crash prevention system, and there was no such equipment for the Trax. To earn the highest mark, models need at least an advanced rating by the institute for this technology. Buick Encore, Chevrolet Trax earn 2015 TOP SAFETY PICK award ARLINGTON, Va. - A small SUV is the first vehicle from the Buick brand to qualify for a TOP SAFETY PICK award from the Insurance Institute for Highway Safety since 2013. The Buick Encore's newly introduced, lower-priced twin, the Chevrolet Trax, also qualifies for the honor. The Encore's award follows improvements to the SUV's structure for better small overlap front protection. The 2015 model earns a good rating in the small overlap test. In contrast, the 2013-14 Encore rated poor in the test. The driver's space was seriously compromised with intrusion measuring as much as 13 inches at the lower door hinge pillar. The dummy's head barely contacted the front airbag before sliding off the left side, as the steering column moved to the right. The side curtain airbag deployed too late and didn't have sufficient forward coverage to protect the head. In the latest test, the driver space was maintained reasonably well, with maximum intrusion of 6 inches at the door hinge pillar and instrument panel. The dummy's movement was well-controlled.

Chevy's 6.6-liter Duramax is pretty much all new

To say there's a heated battle in heavy-duty pickups is an understatement, with Chevrolet, Ford, and Ram constantly trading blows of increased torque, horsepower, and towing capacity. The latest salvo is the revised, more powerful turbo diesel 6.6-liter Duramax V8 in the 2017 Chevy Silverado. It has 910 pound-feet of torque, an increase of 145, putting it nearly level with the Ford Super Duty. Here's a closer look at where those gains come from. How exactly did Chevrolet add all that torque plus 48 horsepower? The automaker essentially took a fine-tooth comb to the entire engine. Chevy says it changed 90 percent of the V8, and the cumulative effect of those small changes adds up to big increases. As you might guess, the turbocharger is updated. The larger unit features electric actuation of the variable nozzle turbine (VNT), and what Chevy calls a double axle cartridge mechanism that separates the VNT moving parts from the housing. That helps with heat performance as well, with a claim that the exhaust side of the turbo can run continuously up to 1,436 degrees Fahrenheit. Helping that cause are six exhaust gaskets made of Inconel - an nickel alloy that contains chromium and iron – and upgraded stainless steel for the exhaust manifold. Despite having the same cast iron cylinder block, albeit with some minor enhancements, the engine has new cylinder heads, pistons, piston pins, connecting rods, and crankshaft, which have all been upgraded to handle 20 percent higher cylinder pressures. Alongside the increase in pressure, Chevrolet also increased the cylinder head's structure with a honeycomb design. The pattern features high-strength aluminum with dual layer water jackets that not only improve strength, but also optimize water flow for better cooling. For 2017, the cylinder head also benefits from integrated plenum that aids the engine in getting more air under heavy loads. The cylinder head isn't the only component to get a minor update, as the pistons have a larger diameter pin for improved oil flow. The same detailed improvements has been bestowed to the humble connecting rods (second in our hearts only to the inanimate carbon rod). The new design has the bolts oriented roughly 45-degrees to the rod instead of parallel. The angle split design, as it's called allows for easier passage through the cylinder.

2013 Chevy COPO Camaro announced with two new engines and manual option

Chevrolet is following up the 2012 COPO Camaro with another limited run of the drag-strip-ready production car for 2013. Ditching the superchargers, the 2013 COPO Camaro can only be equipped with one of three naturally aspirated V8 engines, and other new features include the option of a manual transmission, new front springs, some minor styling changes and a lower starting price of $86,000. All cars are designed to abide by the rules of the NHRA's Stock Eliminator or Super Stock classifications, depending on in which series buyers wish to enter their Chevrolet Camaro.
Returning for 2013 is the 427-cubic-inch V8 producing 425 horsepower, but the new engines include a 325-hp 350-CID V8 and a 375-hp 396-CID V8. Buyers can select to purchase all three engines, and each will be matched with the sequence number of that car; the track-only COPO cars will not have vehicle identification numbers and can't be registered for street use.
Chevrolet is also offering unique enthusiast-specific options such as a COPO Build Book and the opportunity for owners to help assemble their car's engine at the Chevrolet Performance Build Center in Wixom, MI.