2014 Chevrolet Silverado 1500 Lt on 2040-cars

Auto blog

2020 Chevrolet Tahoe, Suburban and GMC Yukon all spied with production lights

One of our spy photographers just caught a smattering of full-size GM SUVs out testing, including the Chevrolet Tahoe, Suburban and GMC Yukon. Previous spy photos of the next-generation of these big GM SUVs have revealed that GM is going with an independent rear suspension design, and these shots confirm the news once again with our best look at the hardware yet. Check them out from the rear, lined up like ducks in a row to see the beefy control arms down there. This will undoubtedly give the big SUVs a more compliant ride, and should bring it back into touch with the refinement from the Ford Expedition and Lincoln Navigator. The new bits we get to see with these shots are production headlights and taillights that are shaping up to look pretty neat. Most distinguishable are the GMC Yukon's LED DRLs. These look a lot like the C-shaped LEDs outlining the headlights on the Sierra, but they have an extra LED strip on top of the C. The parts of the taillights that we can see look significantly different than that found on the Sierra, showing GM is planning on having a great deal of differentiation there. We can sort of see through the mesh covering the grille to what appears to be a classic horizontal bar style front opening. Chevy is predictably dialing the crazy LED strip design back for the Tahoe and Suburban. The parts that are lit up look a whole lot like the headlight fixtures on the 2019 Silverado. That truck uses a stack of lights with the actual headlights separated from the DRLs. We can see the same thing going on here, with the headlight up top and curved LED DRL strip sitting below. It's tough to say if the designs are exactly alike, but we expect to see an extremely Silverado-esque look once all the camouflage comes off. Chevrolet's taillight design differs from its donor truck like the GMC, showing off a curved, vertical series of LEDs out back. Once production lights start popping up like this, we know the vehicle is moving closer to its end game. A reveal sometime later this year could be in the cards for GM's next batch of full-size SUVs. It certainly needs them quick, as Ford rockets ahead with increased Expedition production announced earlier this week.

Junkyard Gem: 1988 Chevrolet Spectrum Sport Coupe

Before General Motors created the Geo brand for cars built or designed by its overseas partners, the Chevrolet Division put its badges on U.S.-market versions of the Toyota Corolla Sprinter, the Suzuki Cultus and the Isuzu Gemini. Those cars were known as the Nova, the Sprint and the Spectrum, and all became Geos starting with the 1989 model year. Today's Junkyard Gem is one of the last Chevy Spectrums ever sold, found in a Denver self-service yard a few months ago. Midway through 1988, the Chevrolet Spectrum abruptly became the Geo Spectrum and was assigned to the 1989 model year. This car was built in May 1988, making it one of the very last of the pre-Geo Spectrums. The Chevrolet/Geo Spectrum was available as a four-door sedan and as a three-door hatchback, from the 1985 through 1989 model years. For 1988 only, a Spectrum Sport Coupe package, featuring some trim upgrades and these rad decals, could be had on the hatchback. This car was essentially identical to its Isuzu-badged counterpart, the I-Mark. In 1988, the MSRP for the cheapest possible Chevy Spectrum hatchback (the stripped-down Spectrum Express) was $6,495, while its somewhat better-equipped I-Mark twin started at $7,439 (that's $17,128 and $19,617 in 2023 dollars). Meanwhile, the base Hyundai Excel hatchback listed at $5,295 and the Yugo GV cost a hilarious $4,199 ($13,963 and $10,941 in today's money). Power came from this 1.5-liter SOHC four-cylinder, rated at 70 horsepower. A turbocharged version with 110 horsepower was available as well. You could get an automatic transmission in the Spectrum, but this car has the base five-speed manual. This car didn't get the optional air conditioning, but at least it has the traditional Isuzu HVAC control icons featuring blow-dried hair and high-heeled dominatrix boots. Just over 170,000 miles on the odometer. Someone installed a pretty good (for the 1980s) Blaupunkt Charlotte CR148 cassette deck in the dash. This was a necessity if you wanted to enjoy full appreciation of the music of the era. The Spectrum is special! It's as slick as city rain. "I didn't spend a lot of money but with my Spectrum it looks like I did." Joe Isuzu mocked Toyota salesmen when pitching the I-Mark. As was nearly always the case during the 1980s, the JDM ads for the same car were much more fun. They should have recreated this commercial with Spectrums.

Chevy confirms 2016 Camaro will have wheels, brakes

Good news, everyone! Chevrolet has issued yet another round of teaser images and information about the sixth-generation Camaro, set to debut in Detroit on May 16. This time around, Chevy's teaser images confirm that the new car will not only have wheels and tires (Goodyear Eagle F1s, no less), but brakes as well. On top of that, we now know that the new Camaro will be 28-percent stiffer than the outgoing model. "The more rigid body structure allowed the engineers to more precisely calibrate the steering and suspension systems because they didn't have to compensate for chassis flex. The lighter structure also enabled the size and mass of elements such as the wheels, tires and brakes to be scaled accordingly," GM said in a press release, which you can read below. We've already learned that the new coupe will be 200 pounds lighter than its predecessor, has a bunch of unique parts, and according to GM's Mark Reuss, will outperform the Ford Mustang in every way. Now, it's only a matter of time before we see the sixth-gen Camaro, but surely not before Chevy issues even more teasers and information. Related Video: 2016 Camaro is Stronger, Lighter and More Responsive Computer aided engineering contributes to 28 percent greater structural stiffness DETROIT – The engineering team spent 9 million hours of computational time honing the driving experience of the all-new 2016 Chevrolet Camaro before the first prototype turned a wheel. The structural modeling led to the Gen 6 Camaro being 28 percent stiffer than the current model. "The modeling abilities of computer aided engineering are advancing at incredible rates," said Jim Karlavage, Camaro program engineering manager. "Today, we can accurately model opportunities to add torsional strength without adding unnecessary mass. The result is a lighter, stiffer structure that benefits every aspect of the driving experience." The more rigid body structure allowed the engineers to more precisely calibrate the steering and suspension systems because they didn't have to compensate for chassis flex. The lighter structure also enabled the size and mass of elements such as the wheels, tires and brakes to be scaled accordingly. "The structural weight savings are compounded by opportunities to reduce un-sprung weight," said Karlavage.