2011 Chevrolet Silverado 1500 Lt on 2040-cars

Auto blog

More 2017 Chevy Bolt powertrain details revealed

We've seen the production version of the Chevy Bolt electric vehicle. We've driven a prototype version. And now it's time to get some details about the powertrain. After the production version's reveal at CES last week, GM trotted out the Bolt EV for its Detroit debut this morning. The company brought with it a bunch of technical specifications. We'll start with the most important part of an EV: the battery. GM has put a 60-kWh lithium-ion battery that weighs just just 960 pounds into the floor of the Bolt. As previously announced, the Bolt's 288 cells will be able to go over 200 miles on a full charge. That full charge takes nine hours on a Level 2 EVSE thanks to the onboard 7.2-kW charger. Of course, a full charge won't be that important most days, which is why GM says that you can get 50 miles of range in "less than two hours" on Level 2. There's a SAE Combo DC fast charging option as well. The battery will have an eight-year/100,000-mile warranty. The Bolt will be able to sprint up to 60 miles per hour in "less than seven seconds" thanks to a 150-kW/200 horsepower motor in the Bolt. The motor is a new GM design that can produce up to 266 pound-feet of torque. The Bolt uses a shift-by-wire system and an, "offset gear and shaft configuration tailored to meet efficiency and performance targets." The Bolt EV's powertrain has a 7.05:1 final drive ratio. You can read all of the details direct from GM below. Related Video: Drive Unit and Battery at the Heart of Chevrolet Bolt EV Engineers focus on careful balance of range and performance DETROIT, Mich. – The 2017 Chevrolet Bolt EV does more than set a new benchmark for affordable, long-range EV driving. It also raises the bar when it comes to driving performance. Engineers developed the Bolt EV's propulsion system to offer more than an estimated 200 miles (based on GM estimates) and a delightful driving experience that's more akin to a compact sports sedan than a small utilitarian crossover. "Being the leader in range and affordability means nothing if the car isn't going to excite you each time you get behind the wheel," said Josh Tavel, Chevrolet Bolt EV chief engineer. "That's why the team was tasked with delivering a propulsion system that would also make the Bolt EV an electric vehicle that owners would love to drive." Single Motor Drive Unit Like most EVs on the road, the Bolt EV's drive system uses a single high capacity electric motor to propel the car.

GM patent reveals new two-stage turbocharger

Modern turbochargers may be some of the best ever made, but performance is something that engineers are always trying to improve. According to GM Inside News, General Motors (GM) is hoping to alleviate some of the negative aspects of a two-stage turbocharger setup with a newly-patented design. The patent, that was filed on May 19, 2016, reveals a clever bypass system that allows the engine, a four-cylinder unit, to optimize both the low-pressure and high-pressure inlets for its respective functions. According to the filing, a conventional two-stage turbocharger setup is engineered to allow both turbines to operate simultaneously at low and mid engine speeds. At high engine speeds, only the low-pressure turbine works. The setup can't isolate either the low or high pressure side, which can impair low-end performance. GM's new two-stage turbocharger setup looks to eliminate this by linking the high-pressure turbo to the exhaust manifold through the high-pressure inlet duct. The low-pressure turbo is attached to the high-pressure turbo by a low-pressure inlet duct, which is linked to a connecting channel. A single actuator that is housed in the exhaust manifold creates a bypass that can opens the high-pressure inlet or close the connecting channel. Depending on what the engine load and speed is, the ECU guides the actuator—a single rotating spindle with discs corresponding to flanges on the high and low pressure sides—to isolate one of the two turbos. Isolating the turbos allow the respective inlets to be engineered for the best possible fluid dynamic performance. The setup should increase performance and decrease lag. There's no word on what car this setup will make an appearance on, but it will most likely be used in premium vehicles before trickling down to the rest of GM's vehicles. Related Video: News Source: GM Inside News, AutoGuide via GM Authority Cadillac Chevrolet GM Technology Sedan turbo patent engine turbocharging

Corvette + fireworks = so much glory

You might think that those of us making our living by reviewing cars, think critically about the cars we're driving most of the time. It could be that I'm an underachiever, but that's not the case with me. In fact, unless I'm set to the review task, I typically think about the cars in front of and around me more frequently. That's because a) you never know what you're going to see out there, and b) all of them could be out to bump/scratch/tailgate/crash me out. You can never be too careful. Such was the case when I was driving a 2015 Chevy Corvette earlier this week. I'd already had my fun finding the edges of grip on a river road in the car, the night before; on the morning in question I was just trying to get to work. But while scanning the suburban streets for potential dangers to the 'Vette's neat-o Daytona Sunrise orange paint, I spied a XXL-sized fireworks tent in an empty parking lot. Oh right, I remembered, 4th of July weekend. That obvious bit of observation lead to a chain of thought along these lines: "We should do something with this car for the 4th" ... "Too bad I have to give it back tomorrow." ... "Wonder if I could do a quick video?" ... "Wonder if I can set off a bunch of fireworks in slow-mo for a video?" The result, well, I won't call it genius, but I will say that I remember why every kid loves fireworks. And I will call it glorious. Happy 4th, y'all.