2002 Chevrolet Silverado Lt 4wd on 2040-cars

Auto blog

GMC Sierra EV AT4, Chevy Silverado EV Trail Boss caught in spy photos

We've known for a while now that GMC and Chevy have been working on AT4 and Trail Boss versions of their respective Sierra EV and Silverado EV pickup trucks. But we're getting our best look yet at them with these spy photos. They give us a better idea of what body changes there will be, as well as a close-up of the tires, giving us their size and type. Some basics of off-road trim levels are obvious to spot. Both trucks feature bright red recovery hooks up front. But beyond that, there isn't much different from the outside of either truck compared to the base examples of each. The front bumpers are basically the same profile as the base bumpers, with the exception of the recovery hooks. The Silverado has natural black plastic fender flares, whereas the GMC has body color examples with integrated marker lights. They both get the same standard side steps, and the rear bumpers also appear unchanged. Each of these is equipped with the MultiPro/Multi-Flex tailgate. Chevrolet Silverado EV Trail Boss prototype View 14 Photos Really the biggest change appears to be in the wheels and tires. Each of them have unique designs, but they have the same dimensions. They're 18-inch wheels with 285/75R18 tires. That comes out to just shy of 35 inches in diameter, a good size of tire for an off-roader — and note how it doesn't even look all that large on such big trucks. Said tires are Goodyear Wrangler Territory AT all-terrains. The gas-powered trucks come with slightly narrower (275) mud-terrain versions as standard. Both of these trucks should start somewhere below the range-topping first edition models the two brands are currently marketing to the public, which hover between $95,000 and $110,000 depending on specification. The Silverado WT does start at just under $80,000, and we would expect the Trail Boss and the Sierra EV AT4 to come in somewhere above that, possibly between $85,000 and $90,000. Specifications are a mystery. It seems likely that at least the Silverado will get the WT's dual motors with 510 horsepower and 615 pound-feet of torque. The GMC could potentially get the more powerful motors making 754 horsepower and 785 pound-feet of torque as a way to differentiate itself, though this is speculation. The 204-kWh battery pack is probable, though there are rumors that at least GMC is going to start offering a smaller, more affordable 170-kWh pack that could be an option.

2016 Camaro gets most revealing tease yet

Chevrolet started its long teaser campaign for the 2016 Camaro by just revealing the exhaust manifold and front frame, but as time has passed the company has slowly unveiled more. In the latest glimpse ahead of the pony car's May 16 debut, we're actually getting to see the model's profile completely undisguised. As suggested by the recent tease of the rear and hood, the 2016 Camaro wears a sharper, more angular design than the current model. This is especially the case when you look at the taut lines making up the rear. Chevy claims that the new shape underwent 350 hours of wind tunnel tests to be able to generate left lift, improve cooling and reduce wind noise in the cabin. A smooth underbody pan is among the aerodynamic tweaks, and it runs from underneath the front grille to the center of the Camaro. Chevy asserts that all of the changes at the front help reduce lift by 30 percent. Related VIdeo: 2016 Camaro is all about the Aero Total aerodynamic lift improved by 30 percent for improved stability 2015-05-11 DETROIT – After 350 hours of wind tunnel testing – often 24 hours a day – the new Camaro will slip more easily through the wind, and drivers of the Camaro SS will experience a marked improvement in reduced aerodynamic lift. These changes illustrate the lengths the aerodynamics team went to for improved performance, stability, cooling and lower wind noise intrusion "The importance of aerodynamics increases exponentially as we increase vehicle performance," said Kirk Bennion, Exterior Design manager. "As engine output increases, we need more engine cooling. As acceleration and top speeds climb, we need to reduce lift for better high-speed stability. However, we cannot make any changes at the expense of increasing drag, which can hurt fuel economy. "To balance these different aerodynamic targets, we tested literally hundreds of changes on the new Camaro, millimeters at a time." For example, the initial design called for the lower grille bars to be set at a 20-degree angle to the horizon. However, after meticulous testing, the team improved engine-cooling airflow by 1 percent by shifting the angle to 13 degrees – a change that achieved the airflow target while maintaining the original grille design. And rather than a traditional front air dam to reduce aerodynamic lift, the team developed a flush belly pan that stretches from the front grille to the center of the vehicle.

Here's our 2016 Chevy Camaro mega-gallery, live from Belle Isle

Nearly 1,000 enthusiasts headed to Belle Isle in Detroit last weekend to witness the reveal of the 2016 Chevrolet Camaro. Couldn't make it? We've got the next-best thing. Here's a mega-gallery of everything that happened. We've got the reveal of the car in all three of the colors that were on display: red, blue, and gray. We take you under the hood and inside the cabin of this new muscle car. Plus, you can view the exterior from every angle. Then we returned the next day to test drive the Camaro. That was only for journalists, but these pictures are just like being there. And even if you made it to the Motor City this weekend, click through all of these shots to get a better sense of the sixth-generation Camaro. Related Video: