1955 Chevrolet 3100 Panel Truck on 2040-cars
Ben Lomond, California, United States
|
1955 Chevrolet panel truck, 235 6 cylinder motor, 3 speed on the column. The truck runs and drives great. Stock brakes have been rebuilt. Body is straight, doors and hinge pockets all solid. No serious rust in the truck. New king pins and front sway bar. Has late model bucket seats. Electric fuel pump. There is a patch panel around the radio in the dash. No temp gauge. All the other gauges work. Headlights, tail lights, turn signals and brake lights work. Glass is good. Rear doors very good, close straight and tight. There is bondo in the lower sides of the body and around the rear wheel wells. Has later model rear axle in it with higher than stock gears, not sure what it is, was in the truck when I bought it. The truck could use lower gears or a 4 speed transmission. I was going to put a stock Chevy truck 4 speed in it, a simple bolt in swap. The rear axle has 1/2 ton 6 lug bolt pattern and is not as wide as a stock axle. New 235-70-15 tires. Nice 55 panel. I'm moving, can't take it with me. I have clear California title, the truck is registered and insured. Opening bid $8,000.00 No Reserve. Truck is for sale locally, reserve right to end auction early. Truck is in Ben Lomond CA 95005
$1,000 deposit within 2 days of end of auction, full payment in 7 days. Buyer pays shipping. |
Chevrolet Other Pickups for Sale
Auto Services in California
Z & H Autobody And Paint ★★★★★
Yanez RV ★★★★★
Yamaha Golf Cars Of Palm Spring ★★★★★
Wilma`s Collision Repair ★★★★★
Will`s Automotive ★★★★★
Will`s Auto Body Shop ★★★★★
Auto blog
Huge, pricey trucks haul jobs and profits for the Detroit Three
Tue, Feb 5 2019DECATUR, Texas — Mickey McMaster is on his 12th pickup truck. The 61-year old farm equipment dealer in Decatur, Texas, two weeks ago treated himself to a 2019 GMC Denali for around $69,000 — a reward for long hours at work. "For me this is the Cadillac of trucks, it's a real luxury vehicle," McMaster said. "I've worked my way up to afford a truck like this and it shows that I've earned it." McMaster is the kind of customer General Motors Co is banking on as it plans to add 1,000 jobs at a plant in Flint, Michigan that will build a new generation of its largest pickups. Demand from Texas and other heartland states for big pick-ups is providing a lifeline to many workers the No. 1 U.S. automaker is laying off at plants elsewhere. The Detroit Three automakers and thousands of their U.S. workers are counting on customers like McMaster to keep buying bigger and more luxurious pickup trucks even if overall U.S. vehicle demand weakens this year, as most analysts predict. At Flint, GM will build a new generation of its heavy-duty Chevrolet Silverado and GMC Sierras, including luxury models that are some of the most profitable vehicles on the planet. GM, Ford Motor Co and Fiat Chrysler Automobiles NV's Ram division own the segment and are each doubling down with new or redesigned models launching this year. Sales of heavy-duty pickups in the United States have grown to more than 600,000 vehicles a year, up more than 20 percent since 2013, according to industry data. Prices for luxury models can easily top $70,000. GM on Tuesday celebrated the launch of a new generation of heavy-duty GMC and Chevrolet pickups at the assembly plant in Flint, Michigan, that is now building all such trucks for the company. At the same time that GM is laying off thousands of U.S. workers and planning to shutter five North American factories, Flint is hiring. The plant runs on three daily shifts, six days a week. As the new model's assembly system ramps up, the plant's capacity will increase by more than 25 percent, plant manager Mike Perez told Reuters. The Flint plant plans to add 1,000 workers, more than half of the 1,500 factory workers who have asked to transfer from plants GM has targeted for shutdown as part of CEO Mary Barra's restructuring plan. "We're bringing in 50 to 100 people every week," said Perez. Workers last week were still finishing the job of retooling the Flint factory to build the new heavy-duty trucks as part of a $1.5 billion investment project.
Bob Lutz builds the case for a mid-engined Corvette
Fri, Jan 16 2015Rumors of a mid-engine Corvette are like automotive industry folklore at this point. Every once in a while, news pops up that it might be happening or is under development, but nothing actually ever comes to fruition as something people can actually buy. The latest spy shots strongly suggest a mid-engine 'Vette is in the cards, yet again, possibly for 2018. Now, an op ed by former General Motors executive (and definite performance car fan) Bob Lutz in Road & Track gives the inside scoop on the history of one of these proposals and lays out how to make it happen today. According to Lutz, the company's engineers believed the C6 ZR1 was at the limit for front-engine, rear-wheel drive performance in that package, and the only solution was to move the powerplant behind the driver. Lutz even got then CEO Rick Wagoner on board. The scheme made it at least as far as clay models for mid-engine versions of the 'Vette and Cadillac XLR. Eventually, a lack of money got in the way, though, bringing the project to an end. Lutz puts a lot of faith in GM's current leaders, especially Mary Barra and Mark Reuss. He thinks the chances of a mid-engine 'Vette happening this time are better than 50 percent. The model, rumored to be named Zora, could offer over 700 horsepower in an ultra lightweight body and be priced at about $120,000 to "suck the doors off everybody." Head over to Road & Track to get some insights from this highly respected and entertaining auto industry veteran. Related Video:
Recharge Wrap-up: U of M wins Solar Challenge, family attempts record-breaking e-bike ride
Thu, Aug 14 2014The University of Michigan Solar Car Team has won the 2014 American Solar Challenge. It is the team's eighth national championship, its fifth in a row, and its first using Siemens' product lifecycle management (PLM) software. The race took place over 1,722 miles and seven days traveling across eight states. The team's car, called "Quantum," outpaced the nearest competitor by four hours. Looking forward, Michigan Solar Car Project Manager Pavan Naik says, "The switch to Siemens tools will give us the ability to model and simulate everything and truly allow us to optimize the performance of our new vehicle. As we start on our quest to win the World Solar Challenge in 2015, we'll be leveraging a full complement of PLM solutions." Read more in the press release below. The EcoCar3 competition, in which teams will convert Chevrolet Camaros into hybrid electric cars, begins in September. The various college teams will have four years to lessen the car's environmental impact as much as possible while maintaining performance and, of course, that cool Camaro design. EcoCar3, which is put on by the US Department of Energy and General Motors, kicks off with a workshop in Novi, Michigan from September 16 - 18. Read more at the DOE website at the dedicated EcoCar3 site or watch the announcement video at our previous post. Zap and Jonway Auto are shifting to a high rate of EV production. Zap already has two lines creating the Urbee EV to met demand, and is switching over a third to make electric minivans and SUVs. The company aims to produce 30,000 EVs by 2015 for the Chinese market. Zap says it has a backlog of 25,000 Urbee orders. Read more in the press release below. A family of four hopes to make a world record-breaking, 6,000-mile electric bike journey this fall. The family, which recently drove from Argentina to Montana in a pickup with a camper, will ride from Montana to Maine, then down the East Coast to Florida in an attempt to break the record for longest electric bicycle ride. They'll use two bikes. The Father, Thomas, will ride one of the bikes carrying one of the children, while the rest of the family rides in a support vehicle, with the mother, Dylan, riding the second bike when they can find others to drive. They have started a crowdfunding campaign for some of the equipment needed to document the trip. See the video below or read more at Treehugger.
























1952 chevy 3100 5 window hot rod resto rod faux patina look!
51 chevy 3100 pick-up truck..off the frame restoration! like new!
1948 chev pick up street rod
1946 chevy pickup 1/2 ton
1948 chevy 3600 flatbed truck - reserved lowered
1957 chevy 3100 truck 4x4