1948 Chevy 3100 5 Window Pickup on 2040-cars

Auto blog

GM seatbelt recall affects over 1m Silverados and Sierras

The Basics: General Motors will recall 895,232 examples of the 2014-2015 Chevrolet Silverado and GMC Sierra 1500 pickups in the US. The campaign will also affect the trucks in markets worldwide, and the total number the company will recall is 1,037,982. The Problem: A steel cable connects the seatbelt to the vehicle, but over time repeated bending can cause the part to fatigue and separate. Injuries/Deaths: None reported. The Fix: Dealers will enlarge the side shield opening and install a pusher bracket on the tensioner. Technicians will also replace the entire tensioner assembly if necessary. If You Own One: GM will contact owners about the recall. The company hasn't said when those notifications would begin. More Information: There are still about 3,000 new examples of these older pickups at dealerships. Until mechanics fix the problem, these vehicles are subject to a stop-sale. Similar problems have affected the General's vehicles in the past. In 2015, the company recalled over 400,000 units of the 2011-2012 Chevrolet Malibu for fatiguing cables. It also hit over a million Lambda platform crossovers in 2014. GM Recalling Certain 2014-15 Pickups to Repair Seat Belts DETROIT – GM is voluntarily recalling 895,232 model year 2014-15 Chevrolet Silverado and GMC Sierra 1500 pickups in the United States because the flexible steel cable that connects the seat belt to the vehicle can fatigue and separate over time as a result of the driver repeatedly bending the cable when entering the seat. This issue was discovered through warranty data, and there have been no reports of crashes, injuries or fatalities related to this issue. For trucks in the field, dealers will enlarge the side shield opening, install a pusher bracket on the tensioner, and if necessary, replace the tensioner assembly. The recall in the United States includes a stop-sale of approximately 3,000 new 2014 and 2015 model year pickups still on dealer lots. Dealers will repair the vehicles prior to delivering them to customers. Customers will be notified by General Motors. They also can look up their vehicle identification number (VIN) at either https://vinrcl.safercar.gov/vin/ website or at https://my.gm.com/web/portal/ownercenter to see if their vehicle is part of the recall. GM also will voluntarily recall and repair these models in other countries where they are sold, including Canada, Mexico, and several countries in Latin America and the Middle East.

GM learning from current Chevy Volt owners as it works on next-gen model

Details of the second-generation Chevrolet Volt extended-range plug-in hybrid are coming in at a trickle, and the latest is that the 2016 model-year Volt will be improved in all meaningful areas, including performance and all-electric range, says General Motors powertrain director Larry Nitz. 60 percent of Volt customers only charge using a standard 110 outlet. Nitz was speaking to Autoline After Hours about the current and future Volt. He said that GM has been tracking Volt driving habits and found that about two-thirds of the Volts' collective miles are driven in electric mode, and that 81 percent of all Volt trips were done in pure EV mode. Additionally, Volt drivers plug the car in 10 times each week, on average. Nitz also said 82 percent of the Volt's commuting miles are coming from the plug instead of the gas tank. Oh, and 60 percent of Volt customers only charge using a standard 110 outlet. Last month, GM released a teaser shot of the 2016 Volt (above) and said the car would make its worldwide debut at the 2015 North American International Auto Show next January. Earlier this year, the Volt was reported to be getting a new chassis for the upcoming version. The Volt could use a bit of new life. Through August, Volt sales were down 12 percent from a year earlier to 13,146 units, and sales plunged 25 percent alone. That compares unfavorably to the Nissan Leaf battery-electric vehicle, whose 2014 sales have jumped 34 percent to almost 19,000 units. You can see Nitz dish the goods in the video below (Volt comments start at around minute 15). You will also notice AutoblogGreen contributor Gary Witzenburg talk about his history with the EV1 and share his take on the Volt. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

Meet Alex Archer, the engineer behind GM's power-sliding center console

In 2009, a GM manager complained to a 59-year-old GM technician about the hassle of retrieving items from a pickup truck bed after driving shifted the cargo. In two days, the tech had come up with the ideas that, ten years later, would debut as the MultiPro tailgate. The engineering teams kept the tailgate secret in part by hiding mock-ups in a locked storage closet in GM's Vehicle Engineering Center in Warren Michigan for two years. A piece in the Detroit Free Press reveals that another storage closet in Warren would play the same role in a different cloak-and-dagger operation, this time for the power-sliding center console in GM's new full-sized SUVs. During a meeting in early 2017, bosses gave the job of the console's creation to 24-year-old design release engineer Alex Archer, just two years out of Stanford University with a degree in engineering and product design.  This time, the catalyst for the feature was an internal GM think tank called co:lab, where employees suggest ideas. Execs gave Archer the task because "They needed someone willing to ask a lot of questions," her 36-month mandate to produce a six-way console that could be a standard cubby or a gaping maw able to swallow four gallon jugs or hide a secret compartment. Clearly, she succeeded. It took Archer and the team nine months to devise a prototype, another six months to get the green light for production. As with the tailgate, the team working on the console grew to include designers, production engineers, and suppliers. Archer, now 26, shepherded the process, and her name is on the patent. "It took a ton of people, I'm just somebody who stuck with it the whole time," she said. GM like her work well enough to produce the "Day in the Life" segment above, five months before the world would hear about the console. Archer's path to engineering was as unlikely as getting the job for the console. She had entered Stanford with plans to be a doctor. But an innovation class during her freshman year, and a sophomore summer spent helping her grandfather rebuild a 1937 MG engine recharted her course. Her grandfather told her, "You know, you could be an engineer for a car company." Consumer reaction to Archer's work won't be far off, the SUVs slated to hit dealerships soon. Meanwhile, she's busy on something that could be just as intense as the console: Restoring a 1955 Packard Clipper in her garage. Head to Freep to check out the story of Archer and the console. Related Video: