1972 Chevy Nova 2 Door Project 350 Vortec 4l60e Clear Title on 2040-cars

Auto blog

400,000 Chevy, GMC pickups recalled: Side airbags can explode

DETROIT — General Motors is recalling more than 400,000 pickup trucks in the U.S. because the side airbags can explode without warning and spew parts into the cabin. The recall covers certain 2015 and 2016 Chevrolet Silverado and GMC Sierra 1500, 2500, and 3500 trucks. Documents posted Friday by U.S. safety regulators say the airbag inflator can rupture or the end cap can fly off on both sides of the trucks. Documents say three inflators ruptured in 2015 Silverados last month, one in Florida and two in Texas. All three trucks were unoccupied at the time, and GM says it has no reports of injuries. Dealers will replace both side airbag modules. The company says it has a limited number of replacement parts available. Owners will be notified starting Aug. 16 and they'll get a second letter when parts are widely available. About 9,000 of the trucks were recalled last year for the same problem. The company says a manufacturing defect allowed moisture into the inflator while it was being manufactured, causing corrosion. The inflators were made in Mexico by Joyson Safety Systems, the company that took over Takata. Back in April, Silverado and Sierra were among nearly 750,000 GM vehicles in a National Highway Traffic Safety Administration (NHTSA) investigation into non-deploying driver-side airbags. That investigation is ongoing. Takata is responsible for the largest recalls in automotive history, covering about 100 million inflators among 19 major automakers worldwide, including about 67 million inflators in the United States. Nineteen deaths in the U.S. have been attributed to Takata inflators. Only about 50 million of the 67 million recalled inflators in the U.S. have been repaired. This latest recall is a good reminder to go to NHTSA's recalls website and enter your car's VIN. Millions of recalled vehicles still pose a danger to their owners. Yours could be one of them.   Recalls Chevrolet GM GMC airbag Takata airbag recall

Why 2015 is going to be a huge year for trucks

Nissan chief executive Carlos Ghosn took center stage to introduce the 2016 Titan last week at the Detroit Auto Show. He spoke of the truck's new features, impressive Cummins V8 diesel engine and the extensive amount of time and money required to build a modern, competitive pickup truck. "We have done all of this because we see opportunity – an opportunity in the unmet needs of today's American truck customers," Ghosn said. He was speaking about the Titan, but his thoughts echo the industry's mindset: When it comes to trucks, find an opportunity and attack. Even with CAFE regulations looming and fickle consumer preferences, investing in trucks is a no-brainer for automakers. Some consumers will always need a truck for their job or lifestyle. And some people will always want one, whether they need it or not. With that in mind, here are four reasons why the pickup-truck sector is more important than ever and poised for growth in 2015. View 24 Photos The Nissan Titan Is Back Okay, it never left, but the Titan hadn't been redesigned since its launch in 2003, and Nissan sold more NV200s than Titans in 2014. It's an understatement to say the truck was languishing. That all changes with the 2016 model. The Titan will come in two variants, a traditional fullsize competitor and the Titan XD. The XD will lead the market launch, and it arrives late this year. It's pitched as a "whitespace" offering, Nissan sales and marketing vice president Fred Diaz said. The idea is to offer something in the general size and price range of a fullsize truck, but also have some of the capability of a heavy-duty truck. The XD uses a fully boxed ladder frame, the chassis design from Nissan's commercial division, and the wheelbase is about 20 inches longer than other Titan models. The XD, which Nissan is calling the flagship of the line, will be the only model with the 5.0-liter Cummins turbodiesel V8. It produces 310 horsepower and 555 pound-feet of torque, while being able to tow 12,000 pounds. V6 and V8 gasoline models will also be offered on the Titan XD and the standard, non-XD model. When production ramps up, the Titan will be sold with several cabs, beds and trims. New features include trailer sway control, an integrated trailer brake controller, more storage options in the cabin and even laminated front and rear side glass to reduce outside noise. All of this has given Nissan fresh confidence in an area where it admittedly has been lacking. "We can compete," Diaz told Autoblog.

GM to cut production at 5 plants in North America, kill several models

DETROIT/WASHINGTON — General Motors Co said on Monday it will cut production of slow-selling models and slash its North American workforce in the face of a stagnant market for traditional gas-powered sedans, shifting more investment to electric and autonomous vehicles. The announcement is the biggest restructuring in North America for the U.S. No. 1 carmaker since its bankruptcy a decade ago. GM said it will take pre-tax charges of $3 billion to $3.8 billion to pay for the cutbacks, but expects the actions to improve annual free cash flow by $6 billion by the end of 2020. GM plans to halt production next year at three assembly plants: Lordstown, Ohio, Hamtramck, Michigan, and Oshawa, Ontario. The company also plans to stop building several models now assembled at those plants, including the Chevrolet Cruze, the Cadillac CT6 and the Buick LaCrosse, the sources said. Sources said the Chevrolet Volt, Impala and Cadillac XTS would also be discontinued. Signs of the demise of six passenger-car models have been swirling since July. Plants in Baltimore, Maryland, and Warren, Michigan, that assemble powertrain components have no products assigned to them after 2019 and thus are at risk of closure, the company said. It will also close two factories outside North America, but did not identify those plants. The AP reported that 14,700 jobs would be affected. Some 8,100 of those would be white-collar jobs reduced through buyouts or layoffs. The No. 1 U.S. automaker signaled the latest belt-tightening in late October when it offered buyouts to 50,000 salaried employees in North America. The company also said it will cut executive ranks by 25 per cent to "streamline decision making." Some 6,000 factory workers could lose their jobs or be transferred to other plants. Its shares were last up 6.2 percent at $38.16. Tariff 'headwinds' and cost-cutting GM Chief Executive Officer Mary Barra told reporters on Monday the company can reduce annual capital spending by $1.5 billion and increase investment in electric and autonomous vehicles and connected vehicle technology because it has largely completed investing in new generations of trucks and sport utility vehicles. Some 75 percent of its global sales will come from just five vehicle architectures by early in the 2020s. It plans to reduce annual capital spending to $7 billion by 2020 from an average of $8.5 billion a year during the 2017-2019 period.