Find or Sell Used Cars, Trucks, and SUVs in USA

1967 Chevrolet Nova Pro Street Roller Chassis on 2040-cars

US $12,000.00
Year:1967 Mileage:0
Location:

Yucaipa, California, United States

Yucaipa, California, United States
Advertising:
Vehicle Title:Clear
Engine:No Engine
Year: 1967
Drive Type: none
Make: Chevrolet
Mileage: 0
Model: Nova
Warranty: no
Trim: Pro Street
Condition: Used: A vehicle is considered used if it has been registered and issued a title. Used vehicles have had at least one previous owner. The condition of the exterior, interior and engine can vary depending on the vehicle's history. See the seller's listing for full details and description of any imperfections. ... 

This is a fresh build, 1967 Chevy Nova Pro Street Drag Car that was being built for the strip and the street. I'm helping to sell for a friend who is presently going through a divorce. The car is located in Yucaipa, CA, covered in her garage. She really can't tell me much of the technical aspects, and I personally race Fords, but recognize quite a bit regarding this build. It has a full cage, including a funny car hoop, and appears to be excellent work. The back half is a 12 bolt Chevy differential (unsure of gear ratio), ladder bar coil-over QA1 shocks. Also has anti-roll device. The rear wing is Ed Quay, and parachute is Deist. The car is straight and rust free. Has stock windshield, but all other windows including the back window are Plexi-Glass. The car comes with wheelie bars (not pictured). Has M/T 14x32-15 on the rear, and 26x4.5-15 M/T front runners. It has rack & pinion steering with what appear to be Chevrolet front disc brakes. The rear deck lid is original metal and is mounted on original hinges. I believe the front and rear motor plates are for a Chevy small block, but she couldn't tell me with any certainty, and they aren't talking (LOL). There are quite a few extra parts that come with the car, including a Griffin aluminum radiator, B&M Ratchet Shifter, the original tail light assemblies, etc. The car is mostly done, needs wiring, ignition, sheet metal interior over the back-half, etc. The body is nice and straight and ready for the paint job of your choosing. She wants 12K for what you see, plus some things that you can't see. Or, a reasonable offer close to that number. Contact me, Dennis at 949 735-6088 if you have any questions. Will not deliver, so please arrange your own transportation company. Thanks.


The car has plates and California registration paid until December 8, 2013, and a clear title.   

Auto Services in California

Yoshi Car Specialist Inc ★★★★★

Auto Repair & Service
Address: 15 Auburn Ave, Baldwin-Park
Phone: (626) 355-2553

WReX Performance - Subaru Service & Repair ★★★★★

Auto Repair & Service
Address: 611 Galaxy Way, Salida
Phone: (209) 661-1017

Windshield Pros ★★★★★

Auto Repair & Service, Windshield Repair, Windows
Address: 7500 Folsom Blvd, Gold-River
Phone: (916) 381-8144

Western Collision Works ★★★★★

Automobile Body Repairing & Painting
Address: 709 N Gramercy Pl, Commerce
Phone: (323) 465-2100

West Coast Tint and Screens ★★★★★

Auto Repair & Service, Door & Window Screens, Window Tinting
Address: Dulzura
Phone: (760) 471-8939

West Coast Auto Glass ★★★★★

Auto Repair & Service, Windshield Repair, Glass-Auto, Plate, Window, Etc
Address: 9157 W Sunset Blvd, Century-City
Phone: (323) 332-6015

Auto blog

Hot Wheels' Twitter-enabled vending machine coughs up free Camaro diecasts

Wed, 27 Feb 2013

There are still plenty of companies that haven't gotten the whole social media thing down pat yet, but Hot Wheels isn't one of them. During the recent Canadian International Auto Show in Toronto, Hot Wheels created a lot of buzz for itself by using a vending machine filled with Chevrolet Camaro models, but instead of money to get the cars, show attendees just had to use Twitter.
To get the free car, people were asked to send a tweet to Hot Wheels Canada saying what they liked about the new Hot Wheels Edition Camaro, and including the #ChevyCIAS hashtag. This seemed to be a popular marketing tool, too, as AdWeek reports that the @HotWheelsCanada account more than tripled in followers during the course of the 10-day show. Looking ahead, this could open up even more innovative marketing possibilities using social media.
Check out the video posted below to watch how it works, and while the auto show has ended and the free-car giveaway has too, we're almost certain that some of the 1,500 freebies will make their way onto eBay.

Meet Alex Archer, the engineer behind GM's power-sliding center console

Sat, Feb 15 2020

In 2009, a GM manager complained to a 59-year-old GM technician about the hassle of retrieving items from a pickup truck bed after driving shifted the cargo. In two days, the tech had come up with the ideas that, ten years later, would debut as the MultiPro tailgate. The engineering teams kept the tailgate secret in part by hiding mock-ups in a locked storage closet in GM's Vehicle Engineering Center in Warren Michigan for two years. A piece in the Detroit Free Press reveals that another storage closet in Warren would play the same role in a different cloak-and-dagger operation, this time for the power-sliding center console in GM's new full-sized SUVs. During a meeting in early 2017, bosses gave the job of the console's creation to 24-year-old design release engineer Alex Archer, just two years out of Stanford University with a degree in engineering and product design.  This time, the catalyst for the feature was an internal GM think tank called co:lab, where employees suggest ideas. Execs gave Archer the task because "They needed someone willing to ask a lot of questions," her 36-month mandate to produce a six-way console that could be a standard cubby or a gaping maw able to swallow four gallon jugs or hide a secret compartment. Clearly, she succeeded. It took Archer and the team nine months to devise a prototype, another six months to get the green light for production. As with the tailgate, the team working on the console grew to include designers, production engineers, and suppliers. Archer, now 26, shepherded the process, and her name is on the patent. "It took a ton of people, I'm just somebody who stuck with it the whole time," she said. GM like her work well enough to produce the "Day in the Life" segment above, five months before the world would hear about the console. Archer's path to engineering was as unlikely as getting the job for the console. She had entered Stanford with plans to be a doctor. But an innovation class during her freshman year, and a sophomore summer spent helping her grandfather rebuild a 1937 MG engine recharted her course. Her grandfather told her, "You know, you could be an engineer for a car company." Consumer reaction to Archer's work won't be far off, the SUVs slated to hit dealerships soon. Meanwhile, she's busy on something that could be just as intense as the console: Restoring a 1955 Packard Clipper in her garage. Head to Freep to check out the story of Archer and the console. Related Video:

MotorWeek looks back at 1995 Chevy Tahoe, GMC Yukon

Sat, Jun 20 2015

MotorWeek's Retro Review series gives us a nostalgic look back at some of the best sports cars and luxury sedans available in the 1980s and '90s. For its latest clip, the show shifts gears to remember the 1995 Chevrolet Tahoe and GMC Yukon. Similar to the success of crossovers today, SUVs were tallying big sales and making big money for automakers in the mid-'90s. The Tahoe and Yukon filled slots in the market as steps down from the larger Suburban. These twins weren't wanting for space, though, with plenty of room to haul around a family. MotorWeek came away generally impressed too, and called the models some "of the better riding sport utilities we've ever experienced." This review comes with some jazzy, electric guitar licks to enjoy in the background.