Monte Carlo on 2040-cars

Auto blog

Chevrolet To Oversee Restoring Sinkhole Corvettes

What Mother Earth devoured, Chevrolet plans to resurrect. The carmaker said Thursday it will oversee restoration of the classic cars swallowed by a huge sinkhole beneath the National Corvette Museum in Kentucky. General Motors Design in Warren, Mich., will manage the painstaking work to repair the eight prize vehicles, the automaker said Thursday. The cars were consumed when the earth opened up early Wednesday beneath a display area when the museum in Bowling Green, Ky., was closed. No injuries were reported. The museum was open Thursday except for the area where the sinkhole occurred. Mark Reuss, GM's head of global product development, said the damaged vehicles rank as "some of the most significant in automotive history." "There can only be one 1-millionth Corvette ever built," he said, referring to one of the damaged cars. "We want to ensure as many of the damaged cars are restored as possible so fans from around the world can enjoy them." Just how the cars will be pulled out of the ground remains to be seen, said museum executive director Wendell Strode. The local fire department estimated the hole is about 40 feet across and 25 to 30 feet deep. The hole opened beneath part of the museum's domed section. "We feel pretty confident that most of the cars can be extracted," Strode said Thursday. "And we hope and believe that with just a little bit of luck, that all eight cars can be extracted and be part of the restoration." Chevrolet spokesman Monte Doran said some of the cars look to be in good shape, while others are buried in rubble. "It will likely be several weeks until we can get the cars out and assessed," he said. The GM Design team has helped restore other historic cars, but the Corvette project looks to be its biggest, he said. "These Corvettes are part of our history, and they want them restored properly," Strode said. "We're thrilled they're doing this." The cars looked like toys as they plunged into the hole, piled in a heap amid dirt and concrete fragments. The museum owns six of the cars while two - a 1993 ZR-1 Spyder and a 2009 ZR1 Blue Devil - are on loan from General Motors. The other cars damaged were a 1962 black Corvette, a 1984 PPG Pace Car, a 1992 White 1 Millionth Corvette, a 1993 Ruby Red 40th Anniversary Corvette, a 2001 Mallett Hammer Z06 Corvette and a 2009 white 1.5 Millionth Corvette. Pictures of the sinkhole showed a collapsed section of floor with multiple cars visible inside the hole.

'84 MotorWeek Cherokee, Bronco and Blazer comparison indulges your SUV nostalgia

These days, truck-based, full-frame SUVs are somewhat of a rarity on the auto landscape due to the rapid rise in popularity of easier-driving, car-based crossovers. Although, without the gradually building popularity of these chunky, high-riding vehicles decades ago, it's unlikely that America's roads would be filled with so many CUVs today. In its latest dig into the archives, MotorWeek has found a 1984 comparison test of a trio of these early Sport Utility Wagons, as long-time host John Davis called them, that helped get acceptance of this segment going. This is a red, white and blue test of the SUVs from American automakers at the time and pits the Chevrolet Blazer, Ford Bronco and Jeep Cherokee (specifically in Wagoneer guise) against each other. Driving manners and interior usability are considered in the evaluation, but Motorweek actually takes these vehicles off road, too. Among the bigger revelations is the improvement in on-road ability in the past 30 years. While specific 0-60 times aren't given, all three models take around 10 seconds just to get to around 50 miles per hour in the 500-feet on-ramp acceleration test. Check out this clip to see just how far this segment has progressed in the past three decades or just get a blast of nostalgia from these now vintage models. News Source: MotorWeek via YouTube Chevrolet Ford Jeep SUV Off-Road Vehicles Classics Videos Ford Bronco chevy blazer

More 2017 Chevy Bolt powertrain details revealed

We've seen the production version of the Chevy Bolt electric vehicle. We've driven a prototype version. And now it's time to get some details about the powertrain. After the production version's reveal at CES last week, GM trotted out the Bolt EV for its Detroit debut this morning. The company brought with it a bunch of technical specifications. We'll start with the most important part of an EV: the battery. GM has put a 60-kWh lithium-ion battery that weighs just just 960 pounds into the floor of the Bolt. As previously announced, the Bolt's 288 cells will be able to go over 200 miles on a full charge. That full charge takes nine hours on a Level 2 EVSE thanks to the onboard 7.2-kW charger. Of course, a full charge won't be that important most days, which is why GM says that you can get 50 miles of range in "less than two hours" on Level 2. There's a SAE Combo DC fast charging option as well. The battery will have an eight-year/100,000-mile warranty. The Bolt will be able to sprint up to 60 miles per hour in "less than seven seconds" thanks to a 150-kW/200 horsepower motor in the Bolt. The motor is a new GM design that can produce up to 266 pound-feet of torque. The Bolt uses a shift-by-wire system and an, "offset gear and shaft configuration tailored to meet efficiency and performance targets." The Bolt EV's powertrain has a 7.05:1 final drive ratio. You can read all of the details direct from GM below. Related Video: Drive Unit and Battery at the Heart of Chevrolet Bolt EV Engineers focus on careful balance of range and performance DETROIT, Mich. – The 2017 Chevrolet Bolt EV does more than set a new benchmark for affordable, long-range EV driving. It also raises the bar when it comes to driving performance. Engineers developed the Bolt EV's propulsion system to offer more than an estimated 200 miles (based on GM estimates) and a delightful driving experience that's more akin to a compact sports sedan than a small utilitarian crossover. "Being the leader in range and affordability means nothing if the car isn't going to excite you each time you get behind the wheel," said Josh Tavel, Chevrolet Bolt EV chief engineer. "That's why the team was tasked with delivering a propulsion system that would also make the Bolt EV an electric vehicle that owners would love to drive." Single Motor Drive Unit Like most EVs on the road, the Bolt EV's drive system uses a single high capacity electric motor to propel the car.