2000 Chevrolet Monte Carlo on 2040-cars

Auto blog

2020 Chevy Silverado, GMC Sierra recalled due to faulty brake component

General Motors is recalling 2020 Chevrolet Silverado 1500 and GMC Sierra 1500 pickups to fix a defect in the trucks' brake system. Certain Silverado and Sierra pickups were produced with brake-caliper bolts that were not heat-treated. Without heat-treating, the bolts are weaker than they should be, and there is a risk that they could fail, which would affect the trucks' braking performance, possibly leading to a crash. In total, 20,352 vehicles are affected. Owners of affected trucks will be contacted by GM. Dealers will inspect the bolts and replace those that are defective. Related Video:      

NHTSA probes 2010 Chevy Tahoe for side airbag issue

After a person was killed in a rollover accident in a 2010 Chevrolet Tahoe in Texas in 2011, the National Highway Traffic Safety Administration is considering whether to conduct a deeper investigation into a potential problem with the model's side airbags. According to the petition filed with the government agency, the SUV's rollover side curtain airbag deployed in the accident, but the design allegedly still allowed some of the occupants in the second- and third-row seats to be ejected from the vehicle. One of them died in the crash. Based on NHTSA's preliminary review, this is the only report of this type of incident happening in a 2007-2015 Tahoe or GMC Yukon. "GM investigated the complaint that is the basis of the petition and found no defect trend," company spokesperson Alan Adler said to The Detroit News, and said the automaker will cooperate with the feds. Still, "a defect petition has been opened to evaluate the issue and make a grant or deny decision," according to NHTSA. Depending on the agency's findings, this could lead to a full investigation and possible recall affecting an estimated 58,000 vehicles. INVESTIGATION Subject : Rollover Side Curtain Air Bags Date Investigation Opened: JUN 11, 2015 Date Investigation Closed: Open NHTSA Action Number: DP15004 Component(s): AIR BAGS All Products Associated with this Investigation Vehicle MakeModelModel Year(s) CHEVROLET TAHOE 2010 CHEVROLET TAHOE HYBRID 2010 Details Manufacturer: General Motors LLC SUMMARY: The Office of Defects Investigation (ODI) has received a petition requesting an investigation of alleged defects that can cause occupant ejections during rollover crashes in certain General Motors vehicles. The petition alleges the defects allow second and third row occupants to be ejected despite the deployment of rollover side curtain air bags. The petition cites a 2011 Texas crash involving a model year 2010 Chevrolet Tahoe, which allegedly resulted in multiple occupants to be ejected. One of the ejected occupants was fatally injured. ODI's preliminary review of its consumer complaint data found no similar reports of occupant ejections on 2007-2015 Chevrolet Tahoe and GMC Yukon vehicles. ODI also reviewed Early Warning Reporting data submitted by General Motors. A defect petition has been opened to evaluate the issue and make a grant or deny decision.

Weekly Recap: BMW rolls out ambitious plug-in hybrid electric plan

"We believe that for the United States, this is going to be very important." – Julian Arguelles Let there be no doubt, BMW is serious about electric vehicles. The German automaker said this week it will make plug-in hybrid versions of all of its core models, an aggressive move that demonstrates its commitment to electric propulsion systems. BMW did not specify which vehicles will get the plug-in systems or provide a timeline for when they will arrive. But the announcement is clearly more than blustering, and the company revealed a 3 Series plug-in prototype this week at an event in France. BMW said the 3 Series uses a version of its 2.0-liter turbocharged four-cylinder engine (240 horsepower, 300 pound feet of torque) with an electric motor sandwiched between the engine and transmission in place of the torque converter. It has an all-electric range of 22 miles. A plug-in X5 with the same powertrain was also displayed alongside the 3 Series, though the X5 has been on the auto-show circuit for more than a year, including a recent stop in Los Angeles. Those two vehicles use "eDrive," and BMW's plans represent the first widespread transfer of its technology from development of the i3 and i8 models to more mainstream products. BMW said it's developing electric powertrains so they can be deployed rapidly across its range, and they are flexible enough to be used with fuel cells in future products. Enticingly, BMW is also working on a "Power eDrive" system, which debuted in a 5 Series GT concept at the event in France. This setup has two electric motors powered by a 20-kilowatt-hour battery pack, and when teamed with a four-cylinder turbo, pump out about 670 hp. Reinforcing BMW's commitment, the company will add more than 200 jobs at its factory in Dingolfing, Germany, to support electric-vehicle development. The moves come as BMW and other automakers diversify their portfolios while fuel economy and emissions regulations are getting tighter around the world. The United States has set a 54.5-mpg CAFE requirement for the 2025 model year. BMW said the electric vehicles were developed with an eye toward the US market, its government policies and its wide-ranging commuting styles. "We believe that for the United States, this is going to be very important," spokesman Julian Arguelles said. Ben Scott, a senior analyst in London with automotive research firm IHS, said BMW's moves are expensive – but necessary – to keep pace with the market.