2013 Chevrolet Malibu Lt 2.5l on 2040-cars

Auto blog

2016 Camaro gets most revealing tease yet

Chevrolet started its long teaser campaign for the 2016 Camaro by just revealing the exhaust manifold and front frame, but as time has passed the company has slowly unveiled more. In the latest glimpse ahead of the pony car's May 16 debut, we're actually getting to see the model's profile completely undisguised. As suggested by the recent tease of the rear and hood, the 2016 Camaro wears a sharper, more angular design than the current model. This is especially the case when you look at the taut lines making up the rear. Chevy claims that the new shape underwent 350 hours of wind tunnel tests to be able to generate left lift, improve cooling and reduce wind noise in the cabin. A smooth underbody pan is among the aerodynamic tweaks, and it runs from underneath the front grille to the center of the Camaro. Chevy asserts that all of the changes at the front help reduce lift by 30 percent. Related VIdeo: 2016 Camaro is all about the Aero Total aerodynamic lift improved by 30 percent for improved stability 2015-05-11 DETROIT – After 350 hours of wind tunnel testing – often 24 hours a day – the new Camaro will slip more easily through the wind, and drivers of the Camaro SS will experience a marked improvement in reduced aerodynamic lift. These changes illustrate the lengths the aerodynamics team went to for improved performance, stability, cooling and lower wind noise intrusion "The importance of aerodynamics increases exponentially as we increase vehicle performance," said Kirk Bennion, Exterior Design manager. "As engine output increases, we need more engine cooling. As acceleration and top speeds climb, we need to reduce lift for better high-speed stability. However, we cannot make any changes at the expense of increasing drag, which can hurt fuel economy. "To balance these different aerodynamic targets, we tested literally hundreds of changes on the new Camaro, millimeters at a time." For example, the initial design called for the lower grille bars to be set at a 20-degree angle to the horizon. However, after meticulous testing, the team improved engine-cooling airflow by 1 percent by shifting the angle to 13 degrees – a change that achieved the airflow target while maintaining the original grille design. And rather than a traditional front air dam to reduce aerodynamic lift, the team developed a flush belly pan that stretches from the front grille to the center of the vehicle.

Weekly Recap: Ford guns for 2016 Le Mans glory with new GT

On the eve of the 24 Hours of Le Mans, Ford confirmed it will return to the French endurance race in 2016 and campaign the new GT racecar 50 years after three GT40s swept the podium at the Circuit de la Sarthe. The factory will back a two-team, four-car effort that will compete in the World Endurance Championship and the Tudor United SportsCar Championship running cars operated by Chip Ganassi Racing with Felix Sabates. The GT racecar will make its track debut in January at the Rolex 24 at Daytona, and the driver lineup will be announced later. "But rest assured, there's quite a line forming out the door," Ganassi said at the announcement. The GT is the modern successor to the iconic GT40, which won Le Mans four straight years from 1966-1969. The racecar is a rolling testbed of Ford's latest technologies, including a powerful twin-turbo EcoBoost V6. The car also makes extensive use of carbon-fiber pieces and advanced aerodynamics. Ford tapped Multimatic Motorsports of Canada and Roush Yates Engines to aid in the development of the GT racer. The road-going version, which was revealed in January at the Detroit Auto Show, is also set to launch next year. It caps Ford's growing performance lineup, and the company has ambitious plans to launch more than 12 new sporty models by 2020, including hot metal like the Focus RS, F-150 Raptor, and Shelby GT350R. The GT embodies Ford's best tech, but news of its return to Le Mans immediately conjured images of the company's fierce rivalry in the 1960s with Ferrari and intense competition with Porsche. "When the GT40 competed at Le Mans in the 1960s, Henry Ford II sought to prove Ford could beat endurance racing's most legendary manufacturers," Ford executive chairman Bill Ford said in a statement. "We are still extremely proud of having won this iconic race four times in a row, and that same spirit that drove the innovation behind the first Ford GT still drives us today." Ford is going back to Le Mans. Somewhere, Hank the Deuce must be smiling. OTHER NEWS & NOTES 2016 BMW 7 Series arrives in the fall BMW revealed the sixth generation of its flagship 7 Series this week, which will start at $81,300 when it launches in the United States this fall. BMW is billing it as the roomiest 7 Series ever, and it measures 206.6 inches in length.

Even if GM does close all 5 of those plants, it'll still have too many

DETROIT — General Motors' monumental announcement on Monday that it will close three car assembly plants and two powertrain plants in North America and slash its workforce will only partially close the gap between capacity and demand for the automaker's sedans, according to a Reuters analysis of industry production and capacity data. Sales of traditional passenger cars in North America have been declining for the past six years and are still withering. After GM ends production next year at factories in Michigan, Ohio and Ontario, it will still have four U.S. passenger-car plants — all operating at less than 50 percent of rated capacity, according to figures supplied by LMC Automotive. In comparison, Detroit-based rivals Ford and Fiat Chrysler Automobiles will have one car plant each in North America after 2019. The Detroit Three are facing rapidly dwindling demand for traditional passenger cars from U.S. consumers, many of whom have shifted to crossovers and trucks. Passenger cars accounted for 48 percent of retail light-vehicle sales in the United States in 2014, according to market researchers at J.D. Power and Associates. This year, sedans will account for less than a third of light vehicle sales. That shift in turn has left most North American car plants operating far below their rated capacities, while many SUV and truck plants are running on overtime. The collapse in passenger-car demand is a challenge for nearly all automakers in the United States, including Japan's Toyota and Honda, which have the top-selling models in the compact and midsize car segments. Toyota executives said last month they are evaluating the company's U.S. model lineup. But Toyota also plans to build compact Corolla sedans at a new $1.6 billion factory it is building in Alabama with partner Mazda. The obstacles facing GM in its plans to close more auto factories became apparent on Tuesday as U.S. President Donald Trump threatened to block payment of government electric vehicle subsidies to GM. While it is not certain that Trump unilaterally has the power to do that, he made it clear he intends to use his office to pressure the company to keep open a small car plant in Ohio that GM says will stop building vehicles in March.