2003 Chevy Malibu V6 Cruise Control Cd Audio Only 41k Texas Direct Auto on 2040-cars

Auto blog

We really want to use an eCrate to restomod an old GM car. Here's what we'd build

You hopefully saw the news today of GM's introduction of its Connect and Cruise eCrate motor and battery package, which effectively makes the Bolt's electric motor, battery pack and myriad other elements available to, ah, bolt into a different vehicle. It's the same concept as installing a gasoline-powered crate motor into a classic car, but with electricity and stuff.  This, of course, got us thinking about what we'd stuff the eCrate into. Before we got too ahead of ourselves, however, we discovered that the eCrate battery pack is literally the Bolt EV pack in not only capacity but size and shape. In other words, you need to have enough space in the vehicle to place and/or stuff roughly 60% of a Chevy Bolt's length. It's not a big car, but that's still an awful lot of real estate. There's a reason GM chose to simply plop the pack into the bed and cargo area of old full-size SUVs. Well that, and having a rear suspension beefy enough to handle about 1,000 pounds of batteries.  So after that buzz kill, we still wanted to peruse the GM back catalog for classics we'd love to see transformed into an electric restomod that might be able to swallow all that battery ... maybe ... possibly ... whatever, saws and blow torches exist for a reason.  1971 Buick Riviera Consumer Editor Jeremy Korzeniewski: If you’re going to build an electric conversion, why not do it with style? ThatÂ’s why IÂ’m choosing a 1971-1973 Buick Riviera. You know, the one with the big glass boat-tail rear end that ends in a pointy V. Being a rather large vehicle with a big sloping fastback shape, IÂ’m hoping thereÂ’s enough room in the trunk and back seat to pack in the requisite battery pack. That would likely require cutting away some of the metal bulkhead that supports the rear seatback, but not so much that a wee bit of structural bracing couldnÂ’t shore things up. The big 455-cubic-inch Buick V8 up front will obviously have to go. Remember, this was the 1970s, so despite all that displacement, the Riviera only had around 250 horsepower (depending on the year and the trim level). So the electric motorÂ’s 200 horsepower and 266 pound-feet of torque ought to work as an acceptable replacement.   1982 Chevrolet S10 Associate Editor Byron Hurd: OK, so the name "E-10" is already taken by a completely different truck, but let's not let labels get in the way of a fun idea.

GM doubles miles open to its Super Cruise technology

DETROIT — General Motors said on Wednesday owners of certain vehicles equipped with its Super Cruise assisted driving system will now be able to use it on 400,000 miles (643,740 km) of North American roads, doubling the current operating area as Tesla and other automakers race to deploy hands-free cruising technology. GM's Super Cruise system, like Tesla's Autopilot system, is a driver assistance system, and does not enable true autonomous driving. Spurred by Tesla's aggressive deployment of Autopilot, and Tesla Chief Executive Elon Musk's promises of a more advanced "Full Self Driving" system, GM, Ford, Volkswagen and Mercedes-Benz are racing to deploy competing partial automation technology in major markets. At the same time, safety regulators are showing concern that drivers do not understand that Autopilot and similar systems are not designed to take over driving in every circumstance. The GM system's sensors and software allow a motorist to cruise with hands off the wheel on highways that have been mapped in detail. But the driver is expected to stay alert and ready to take over the car. GM uses technology to monitor the driver, and Super Cruise will sound alarms or slow the car to a stop if it detects that a driver is not responding. Starting later this year, GM plans to enable vehicles equipped with Super Cruise and the company's latest vehicle electronic system to operate hands-free on major, undivided highways in the United States and Canada, as well as additional miles of divided, interstate highways. Currently, Super Cruise operates only on interstate, divided highways. The expansion, enabled by wider digital mapping, will allow owners of properly equipped GM vehicles to cruise hands-free on stretches of Route 66 and the Pacific Coast Highway in the U.S. West or the Trans-Canada highway in Western Canada, GM said. Many of the new roads GM has mapped are in rural, heartland states where GM pickup trucks are popular. GM plans to offer Super Cruise as an option on its Chevrolet Silverado and GMC Sierra large pickups later this year. GM has said previously it intends to offer Super Cruise as an option on 22 models by the end of 2023. Depending on the model, Super Cruise costs $2,200 to $2,500 to add as an option. (Reporting by Joe White in Detroit; Editing by Matthew Lewis) Related video: Cadillac Chevrolet GM GMC Technology Super Cruise

GM to add 1,200 workers at 2 Michigan factories

DETROIT — General Motors is adding 1,200 jobs at two Michigan factories to build midsize SUVs and two new luxury sedans. GM said Friday that its Lansing Delta Township plant will get a third shift and 800 more workers to build the Chevrolet Traverse and Buick Enclave SUVs, which have three rows of seats. The Lansing Grand River plant will get a second shift and 400 more workers to build two new Cadillac sedans, the CT4 and CT5. Employees laid off at other GM factories will fill the new jobs first, then workers will be added, GM spokesman Dan Flores said. The company has not determined yet how many new people will be needed, he said. Both additional shifts will start working sometime between April and June, the company said. Lansing Delta Township now employs about 2,500 salaried and blue-collar workers, while the Grand River plant has 1,400. GM sold more than 147,000 Traverse SUVs in the U.S. last year, a 0.4% increase from 2018. Enclave sales were up 3% to just over 51,000, according to Autodata Corp. Related Video: