Find or Sell Used Cars, Trucks, and SUVs in USA

1970 Chevelle Malibu Rolling Chasis Project on 2040-cars

Year:1970 Mileage:0
Location:

Little Rock, Arkansas, United States

Little Rock, Arkansas, United States
Advertising:

Here you have 1970 Chevelle Malibu Rolling chassis project.  With body work, interior work, and the right drive train this could be a show stopper!  Doesn't need a frame off restoration.  This car is solid and does not need as much work as most project cars.  The car has some rust but it does not seem like a lot.  There is some rust on a few of the body panels, a hole in the drivers side floor and some rust in the trunk floor.   The seats are not originals.   Please see the pictures for details; zoom it the pics are detailed.   I purchased this car as a project and have now decided I do not have time to complete it.   This car is in very good re-buildable condition.   My lost, your gain!  Don't bid if you do not have the Money, or time for this car.  Ask any questions before bidding and 0 Feedback bidders will be blocked unless we talk first.  Buyer 100% responsible for shipping.  Car will have to be picked up. Again, this is a project car with no motor or transmission.

Auto Services in Arkansas

Wrecktified Collision Center ★★★★★

Automobile Body Repairing & Painting, Truck Painting & Lettering
Address: 3405 Wheeler Ave, Cedarville
Phone: (479) 785-5100

Three Star Muffler Shop ★★★★★

Auto Repair & Service, Automobile Parts & Supplies, Mufflers & Exhaust Systems
Address: 5400 Asher Ave, Cammack-Village
Phone: (501) 568-2332

Texarkana Glass Co ★★★★★

Auto Repair & Service, Glass-Auto, Plate, Window, Etc, Windshield Repair
Address: Antoine
Phone: (903) 793-4277

Texarkana Glass Co ★★★★★

Auto Repair & Service, Glass-Auto, Plate, Window, Etc, Windshield Repair
Address: Cove
Phone: (866) 595-6470

Teeter Motor Co. ★★★★★

Auto Repair & Service, New Car Dealers, Used Car Dealers
Address: 1512 W Moline St, Lonsdale
Phone: (501) 771-2341

Service Station The ★★★★★

Auto Repair & Service, Automobile Parts & Supplies, Tire Dealers
Address: 1108 W Main St, Howell
Phone: (479) 754-0068

Auto blog

Leak reveals GM's 2017 heavy duty diesel trucks to get 910 lb-ft of torque [UPDATE]

Tue, Sep 27 2016

UPDATE: Chevrolet officially announced specs for the 2017 Silverado HD and the rumors were true. The truck's new Duramax 6.6-liter turbo-diesel V8 puts out 445 horsepower and 910 pound-feet of torque. Chevrolet says the new motor produces 19 percent more torque and 12 percent more horsepower, while producing 35 percent fewer emissions. Overall, the new engine is a big improvement over the current motor, which generates 397 horsepower and 765 pound-feet of torque. According to Truck Trend, GM's newest heavy duty pickup trucks will pick up quite a bit more power and torque. The publication spotted a recent GM Powertrain ordering catalog that had the engine specs for the 2017 model year and managed to get some screenshots before the catalog was taken down, and they can be viewed here. The screenshots revealed that the 6.6-liter turbodiesel V8 powering the Silverado and Sierra heavy duty models will boast 445 horsepower and 910 lb-ft of torque. This is a substantial gain over the current models' 397 horsepower and 765 lb-ft of torque, and as Truck Trend points out, it exceeds the Ford Super Duty line's horsepower output of 440, but comes short of the 925 lb-ft rating. Truck Trend credits part of this output gain to the new intake system GM will introduce on the 2017 heavy duties. The intake gets 60 percent of its air from a scoop on the hood, with the other 40 percent coming from behind one of the front fenders. GM doesn't reveal horsepower figures in the press release about the scoop, but it does say the cooler air helps with maintaining the engine's output, and that the scoop does produce a ram-air affect, providing more air at speed. As we know, more air plus more fuel equals more power, but there's likely more to the power increase in this engine than only the intake. Related Video: News Source: Truck Trend via MSN Chevrolet GM GMC Truck Diesel Vehicles

2016 Chevy Cruze is lighter, loaded [UPDATE]

Thu, Jun 25 2015

UPDATE: Live photos and video of the reveal have been added at the end of the story. Chevrolet revealed the second-generation Cruze Wednesday, promising a larger, more efficient car that drives better than the sedan it replaces. We're particularly excited about the new turbocharged, 1.4-liter four-cylinder engine, which makes 153 horsepower, an upgrade from the outgoing 1.8-liter naturally aspirated engine's 138 hp. Torque climbs even more significantly, from 148 pound-feet to 177 in the new mill. Peak twist can be called up between 2,000 and 4,000 rpm, which should make performance easy to access. Combined with a lighter architecture that slashes the Cruze's curb weight by 250 pounds (although the actual curb weight hasn't been released), the new four-door can hit 60 miles per hour in a respectable eight seconds. That's not hot hatchback territory, but it should be more than suitable for the average consumer. That same consumer should also appreciate the new engine's economy. The Cruze now returns an even 40 miles per gallon on the highway and will cover 530 miles on a single tank, all the while running on plain old 87-octane fuel. There's also a diesel-powered Cruze model, although Chevy didn't release specific details, aside from saying that it will arrive in dealers in 2017, over a year after the gas-powered model's early 2016 on-sale date. Despite the 250-pound drop in weight, the new Cruze has grown significantly. Its wheelbase is now the longest in the segment, with 106.3 inches of sheetmetal between the front and rear axles compared to 105.7 in last year's model, while the sleek new body cuts the coefficient of drag to just 0.29. The overall length increases from 181 inches to 183.7, though the new model is nearly an inch lower overall. That's both good news and bad news for interior space. Rear legroom is up from 35.4 to 36.1, but headroom is down in both the front and backseats by over half an inch. Tech fans, meanwhile, will appreciate the new standard MyLink display. The seven-inch touchscreen is compatible with both Android Auto and Apple CarPlay, while an optional eight-inch display will be offered, as well. 4G LTE wi-fi, heated rear seats, a heated steering wheel, and wireless phone charging will also be offered as an optional extras. New safety features include blind-spot monitoring with cross-traffic alert, lane keeping assist, and forward collision warning.

2019 GMC Sierra revealed with CarbonPro bed and new diesel engine

Thu, Mar 1 2018

It's only March, and it's already been one hell of a year for trucks. January's Detroit Auto Show saw the reveals of the 2019 Ram 1500, 2019 Ford Ranger and the 2019 Chevy Silverado. The Chicago Auto Show brought new versions of the Toyota Tacoma and Toyota Tundra TRD Pro. Today, we finally got our first look at the Silverado's twin, the 2019 GMC Sierra. The truck features new styling, a new diesel engine and — on the Sierra Denali — a carbon fiber bed. As with every new full-size truck, the Sierra is larger than the outgoing model in almost every dimension, though exact dimensions haven't been revealed. For reference, though, the Chevy Silverado's bed is 7-inches wider than before. The new Sierra grille is more upright than before and features new C-shaped lighting. The Denali gets LED headlights, tail lights and fog lights. Both SLT and Denali trims get unique 22-inch wheels. As we saw in spy photos, the Sierra's interior is mostly just a copy of the Silverado's with some chrome accents sprinkled throughout. If you like the current truck interiors, you'll be pleased with the new model. Those hoping for a wholesale change will be left wanting. The big improvements inside include a full-color heads-up display, trailer hitch assist apps and cameras, and the rear-camera mirror found in models like the Chevy Traverse and Cadillac CT6. Safety and convenience features include a surround-view camera, blind-spot monitoring, pedestrian detection and low-speed automatic braking. Like the Silverado, there's been a significant effort to cut weight in the new Sierra. The 2019 model loses as much as 360 pounds compared to the current truck. It uses aluminum for the doors, hood and tailgate. Steel is still used for the fenders, roof and standard cargo box. The Denali, however, gets the real surprise here. Available only on the top-tier trim, the bed box will be constructed of carbon fiber rather than steel, saving 62 pounds. Carbon fiber only replaces the steel inner panels and floor. GMC says the carbon fiber will also help scratch and corrosion resistance. SLT and Denali models also get a new MultiPro tailgate. This is unique to the Sierra and separate from the Silverado's power assist unit. A new feature that helps one get into and out of the bed using an assist handle. The tailgate step has a maximum weight capacity of 375 pounds. There multiple positions that allow customers to extend the bed, or drop the center vertically to gain easier access to the back.