Chevrolet Lumina 2 Door Coupe on 2040-cars

Auto blog

GM removes start/stop from full-size trucks and SUVs with V8 engines

GM is removing start/stop technology from a number of its popular full-size SUVs due to the ongoing chip shortage. This follows the removal of cylinder deactivation technology from some of its trucks, which was also due to the chip shortage. GM Authority first reported the news, but we’ve just confirmed everything with a GM spokesperson.  The following 2021 model year vehicles will be affected: Chevy Tahoe, Chevy Suburban, GMC Yukon, Cadillac Escalade, Chevrolet Silverado 1500 and GMC Sierra 1500. Only versions of those vehicles built with the 5.3-liter V8 or 6.2-liter V8 and mated to the 10-speed automatic will have the tech removed from them. Only vehicles manufactured on or after June 7 will be affected. “By taking this measure, it will enable us to continue production of our high-demand full-size SUV and pickups as the industry continues to rebound and strengthen,” GM said in a statement. Those who ultimately buy one of these vehicles without start/stop technology will receive a $50 discount off MSRP for their troubles. Losing this fuel-saving tech could be a big negative for some, but we know many folks turn it off anyway. Not having to press the button to deactivate start/stop every time could actually be a positive if youÂ’re part of the camp who does that already. 2021 Cadillac Escalade Sport Platinum View 27 Photos On the downside, GM says “most of the affected vehicles will experience a minor reduction in fuel economy.” We donÂ’t have revised window stickers in hand to know how each model will be affected, but any 1 mpg reduction will be rather impactful for vehicles rated as low as these trucks already are. Any reduction will be seen in the city mpg rating, so take the kind of driving youÂ’re going to be doing into account before purchasing. When it comes to greenhouse gas compliance rules, GM says it doesnÂ’t foresee this impacting the companyÂ’s average fleet score. It also intends to begin adding start/stop back to these models as soon as possible, but there will be no retrofit effort made to fit the tech to vehicles already built without it. “Our supply chain organization continues to make strides working with our supply base to mitigate the near-term impacts of the semiconductor situation,” GMÂ’s statement reads. “GM continues to leverage every available semiconductor to build and ship our most popular and in-demand products, including our highly profitable full-size trucks and SUVs for our customers.

Chevy's 6.6-liter Duramax is pretty much all new

To say there's a heated battle in heavy-duty pickups is an understatement, with Chevrolet, Ford, and Ram constantly trading blows of increased torque, horsepower, and towing capacity. The latest salvo is the revised, more powerful turbo diesel 6.6-liter Duramax V8 in the 2017 Chevy Silverado. It has 910 pound-feet of torque, an increase of 145, putting it nearly level with the Ford Super Duty. Here's a closer look at where those gains come from. How exactly did Chevrolet add all that torque plus 48 horsepower? The automaker essentially took a fine-tooth comb to the entire engine. Chevy says it changed 90 percent of the V8, and the cumulative effect of those small changes adds up to big increases. As you might guess, the turbocharger is updated. The larger unit features electric actuation of the variable nozzle turbine (VNT), and what Chevy calls a double axle cartridge mechanism that separates the VNT moving parts from the housing. That helps with heat performance as well, with a claim that the exhaust side of the turbo can run continuously up to 1,436 degrees Fahrenheit. Helping that cause are six exhaust gaskets made of Inconel - an nickel alloy that contains chromium and iron – and upgraded stainless steel for the exhaust manifold. Despite having the same cast iron cylinder block, albeit with some minor enhancements, the engine has new cylinder heads, pistons, piston pins, connecting rods, and crankshaft, which have all been upgraded to handle 20 percent higher cylinder pressures. Alongside the increase in pressure, Chevrolet also increased the cylinder head's structure with a honeycomb design. The pattern features high-strength aluminum with dual layer water jackets that not only improve strength, but also optimize water flow for better cooling. For 2017, the cylinder head also benefits from integrated plenum that aids the engine in getting more air under heavy loads. The cylinder head isn't the only component to get a minor update, as the pistons have a larger diameter pin for improved oil flow. The same detailed improvements has been bestowed to the humble connecting rods (second in our hearts only to the inanimate carbon rod). The new design has the bolts oriented roughly 45-degrees to the rod instead of parallel. The angle split design, as it's called allows for easier passage through the cylinder.

GM to add 1,200 workers at 2 Michigan factories

DETROIT — General Motors is adding 1,200 jobs at two Michigan factories to build midsize SUVs and two new luxury sedans. GM said Friday that its Lansing Delta Township plant will get a third shift and 800 more workers to build the Chevrolet Traverse and Buick Enclave SUVs, which have three rows of seats. The Lansing Grand River plant will get a second shift and 400 more workers to build two new Cadillac sedans, the CT4 and CT5. Employees laid off at other GM factories will fill the new jobs first, then workers will be added, GM spokesman Dan Flores said. The company has not determined yet how many new people will be needed, he said. Both additional shifts will start working sometime between April and June, the company said. Lansing Delta Township now employs about 2,500 salaried and blue-collar workers, while the Grand River plant has 1,400. GM sold more than 147,000 Traverse SUVs in the U.S. last year, a 0.4% increase from 2018. Enclave sales were up 3% to just over 51,000, according to Autodata Corp. Related Video: