2005 Chevrolet Impala Base Sedan 4-door 3.8l on 2040-cars

Auto blog

NHTSA approves hybrid rearview mirror display in Cadillac CT6, Bolt EV

The Chevy Bolt EV prototype doesn't just have a fancy new all-electric powertrain. Just outside the driver's line of sight is a newfangled rearview mirror, one that can turn into a screen that shows a moving image from the rear-facing camera. Speaking to NPR's Robert Siegel yesterday, Department of Transportation secretary Anthony Foxx said that NHTSA has now approved this type of mirror/screen for use in vehicles. According to a letter from NHTSA to General Motors, GM will likely use this Full Display Mirror first in the 2016 Cadillac CT6 before coming to the Bolt. In its letter to GM, NHTSA said that the Full Display Mirror will only qualify as a standard rearview mirror as long as there are normal side mirrors in place. In other words, don't expect to see cameras and screens replacing all the mirrors in a motor vehicle just yet. @AutoblogGreen @NPR - #NHTSA has OK'd GM rear-view system that can switch between mirror & camera views. pic.twitter.com/6CBeIit10v — Anthony Foxx (@SecretaryFoxx) February 22, 2016 The Full Display Mirror was developed by Gentex, which has long worked with GM. The FDM debuted in 2014 and some people hoped it would also make its way into the Tesla Model X. Gentex, which also makes auto-dimming mirrors, says that it has "set out to develop the technologies and core competencies necessary to manage this evolution of the rearview mirror." The Chevy Bolt EV will start at $37,500, before incentives. The 200-mile EV will go into production late this year for likely sale in early 2017. Related Video:

GM recalls 200k Hummer H3s for fire risk

An issue with fires erupting in some Hummers has prompted General Motors and the National Highway Traffic Safety Administration to issue a recall for nearly 200,000 vehicles around the world. The bulk of them are in the United States. According to the first statement (below) obtained by Autoblog from GM, the issue stems from the HVAC system in Hummer H3 models. The connector module for the blower motor has, in certain cases, overheated, melted the surrounding plastic, and started a fire. 42 such cases have been reported, including three instances of occupants citing minor burns. GM confirms that two of those three cases lead to the vehicle being destroyed in the fire, but states that no crashes or fatalities have resulted. The issue affects 196,379 examples of the 2006-10 H3 wagon and the 2009-10 H3T pickup, with 164,993 estimated to be in the United States. In order to fix the issue, dealers are being instructed to replace the relevant parts of the connector and harness. In a second, unrelated campaign, GM is also calling in 50,731 Chevy Spark and Sonic small cars – 45,785 of them in the US – due to a software glitch. In those affected vehicles fitted with the base radio and OnStar system, the audio system may not be able to switch out of turn-by-turn direction mode, causing the display to go blank and all sound to mute – including key safety warnings. In addition, the system may not switch off, draining the battery. GM states that no crashes, injuries, or fatalities have resulted from this issue, and all that dealers will need to do in this case is reflash the software. Related Video: General Motors is recalling 164,993 2006-2010 model year HUMMER H3 and 2009-2010 model year HUMMER H3T models in the U.S. In certain vehicles, the connector module that controls the blower motor speed in the heat/vent/air conditioning (HVAC) system may overheat under extended periods of operation at high- and medium-high speeds. The heat could melt the plastic surrounding the connector module, increasing the risk of a fire. Dealers will replace the affected portion of the connector and harness. GM is aware of three reported minor burns and 42 fires but no crashes or fatalities related to this condition. Including Canada, Mexico and exports, the total recall population is 196,379. ### General Motors is recalling 45,785 2014-2015 model year Chevrolet Sparks, and 2015 model year Chevrolet Sonics in the U.S.

Chevy Colorado gets box delete option designed for upfitters

The Colorado, which marks the return of Chevrolet to the midsize truck segment, is receiving critical praise, and now it's time for the pickup to get to work. At the National Truck Equipment Association Work Truck Show in Indianapolis, IN, Chevy is unveiling a box delete option package for the model that allows businesses to custom tailor the Colorado to their needs. The choice to remove the bed is exclusively available on the Colorado Work Truck trim in the rear-wheel drive, extended cab model with a 305-horsepower, 3.6-liter V6 and six-speed automatic gearbox, and Chevy claims this is the only option of its type in the segment. Beyond the obvious loss of the rear, these trucks feature eight mounting points on the frame for upfitters to install any necessary modifications. They also get the Z82 trailering package and a locking differential. The versions with the box delete package carry a payload rating of 2,200 pounds an a gross vehicle weight rating of 6,001 pounds. "It's ideal for utility companies requiring service bodies, as well as landscapers and other businesses needing the utility of a flatbed," Ed Peper, US Vice President for General Motors Fleet and Commerical, said in the option's announcement. Further options with the package are limited to choosing a repositioned fuel filler for the upfitter to install and deleting the rear seat for extra interior capacity. The box delete becomes available in mid-April, and buyers get a $300 credit off the price of the Colorado when it's selected. Colorado 'Box Delete' Expands Options for Businesses Chevrolet package offers unique midsize pickup platform for alternative uses 2015-03-04 INDIANAPOLIS – With a box delete option, business owners and fleet managers can have it their way when it comes to customizing the back end of the 2015 Chevrolet Colorado. Chevrolet today announced availability of the package in mid-April. It is on display this week at the annual National Truck Equipment Association Work Truck Show in Indianapolis. It is the only such option offered in the midsize truck segment. "With the segment-leading efficiency and maneuverable size, the Colorado makes a great, flexible choice for urban businesses and fleets to make the most of a midsize truck," said Ed Peper, U.S. vice president, GM Fleet & Commercial.