Find or Sell Used Cars, Trucks, and SUVs in USA

1968 Chevrolet Chevy Impala Base Convertible 2-door 396 427 Ss Caprice on 2040-cars

Year:1968 Mileage:96247 Color: Green /
 Green
Location:

Grants Pass, Oregon, United States

Grants Pass, Oregon, United States
Advertising:
Transmission:Automatic
Body Type:Convertible
Engine:6.5L 396Cu. In. V8 GAS Naturally Aspirated
Vehicle Title:Clear
Fuel Type:GAS
VIN: 164678C139838 Year: 1968
Interior Color: Green
Make: Chevrolet
Number of Cylinders: 8
Model: Impala
Trim: Base Convertible 2-Door
Drive Type: U/K
Options: Convertible
Mileage: 96,247
Exterior Color: Green
Condition: Used: A vehicle is considered used if it has been registered and issued a title. Used vehicles have had at least one previous owner. The condition of the exterior, interior and engine can vary depending on the vehicle's history. See the seller's listing for full details and description of any imperfections. ... 

This is a 1968 Chevrolet Impala 2 door convertible project car.

This still has the numbers matching 396/325 HP engine and 400 automatic trans.

The car's been sitting for 10 years but starts right up and runs strong.

 I have video of the car running if your interested in viewing it.

This car has factory power disc brakes, power steering, original factory 15'' rally wheels.... even the original radio.

The body panels are nice and solid.... minor body work on driver quarter panel and rust in usual places.

Front and back floor pans are rusted through....rockers and trunk are nice and solid. This car was getting prepped for a restoration about 10 years ago.... some chrome was pulled but looks to be all there.... front bench seat was removed and can't be located.

Guages look nice, dash has one crack down the center, lower dash is in good shape and plastic parts surrounding the dash and guages are good.

 All convertible hardware in great shape.

Windshield needs replaced....the rest of the glass is good....windows roll up and down. Ask questions.... I'll do my best to answer them. Please refer to the pictures.... they describe the car the best.

Beautiful car for a project!

 

Please, serious bidders only.

Thank you for your interest.

Auto Services in Oregon

Uncle Al`s Automotive Service ★★★★★

Auto Repair & Service
Address: 180 E Clarendon St, Canby
Phone: (503) 655-9977

Toyota of Gladstone ★★★★★

Auto Repair & Service, New Car Dealers, Used Car Dealers
Address: 19375 SE McLoughlin Blvd, Gladstone
Phone: (866) 381-9457

Tommy`s Window Tinting ★★★★★

Auto Repair & Service, Window Tinting, Glass Coating & Tinting
Address: 915 SE 12th Ave, Portland
Phone: (503) 963-8468

Three Sisters Automotive ★★★★★

Auto Repair & Service, Automobile Air Conditioning Equipment, Automobile Air Conditioning Equipment-Service & Repair
Address: 177 W Sisters Park Dr, Sisters
Phone: (541) 549-1890

Peoria Electric ★★★★★

Auto Repair & Service, Automobile Parts & Supplies, Automobile Accessories
Address: 33901 SE Peoria Rd, Shedd
Phone: (541) 753-9191

Oak Valley Honda ★★★★★

Auto Repair & Service, New Car Dealers, Used Car Dealers
Address: 8515 Lone Oak Rd N, Lafayette
Phone: (503) 472-0465

Auto blog

Surprise! GM putting aluminum in next-gen pickups

Wed, Aug 5 2015

Last month, General Motors launched a series of ads touting the benefits of steel over aluminum – specifically, with regard to the Chevy Silverado versus the Ford F-150. (Kind of. We're not sure what a grizzly bear has to do with anything.) We took issue with the ads, with editor in chief Mike Austin saying they "reek of insecurity, and distract from the Silverado's strengths that could be used for positive advertising." But what bothers us more, is that yet another report surfaced claiming anti-aluminum GM will indeed use the weight-saving material in its next-generation fullsize trucks. On Tuesday, GM announced a $877-million investment for its truck plant in Flint, MI. But Reuters says that huge overhaul is because the trucks will use "substantially different equipment than the tools GM uses today." The report specifically states, "People familiar with the company's plans say GM's next-generation pickups and SUVs will make use of various materials, including aluminum and lightweight steel, to shed weight and gain fuel efficiency to meet tougher federal standards." The Silverado already uses a few aluminum components in the engine and hood, and if more widespread use will help GM build its best fullsize trucks ever, then that's great. Honestly, we have no reason to doubt that aluminum will be used in the next Silverado and GMC Sierra. We just hope GM remembers that nothing is ever truly deleted from the bowels of the Internet when it launches the subsequent "look how great aluminum is!" campaign. Related Video: News Source: Reuters Green Plants/Manufacturing Chevrolet GM GMC Truck aluminum steel

GM cars and SUVs recalled for leaking transmission fluid

Thu, Nov 5 2020

General Motors is recalling more than 194,000 vehicles from 2018 to 2020 due to transmission fluid leaks. The leaks stem from an auto stop-start component that may have been installed with loose or missing bolts. The leaking fluid can affect the transmission's performance, and if it leaks onto a hot exhaust component, could potentially cause a fire. GM says that to date, it knows of no accidents or injuries related to the defect. The issue affects models from all four GM divisions. From Chevrolet, the affected vehicles are: 2018 Malibu, 2018–2019 Cruze, 2018–2020 Equinox, 2018–2020 Traverse, 2019–2020 Blazer At Buick, the following models are included: 2018–2019 LaCrosse, 2019–2020 Encore, 2019–2020 Enclave, At GMC, the recall includes: 2018–2020 Terrain, 2019–2020 Acadia Cadillac has two affected vehicles: 2019–2020 XT4 and 2020 XT6 The recall is scheduled to begin in mid-December. Owners of the affected vehicles will be contacted. Dealers will inspect the transmission accumulator, and replace those with loose or missing bolts.

GM to invest $150 million in Flint to boost heavy-duty pickup production

Thu, Jun 13 2019

FLINT, Mich. — General Motors President Mark Reuss said on Wednesday that the automaker is investing about $150 million at its Flint Assembly plant in Michigan to boost production of heavy duty trucks by another 40,000 vehicles a year. Reuss announced the investment at the Flint truck assembly plant wearing a United Auto Workers pin. The Detroit automaker had announced back in February it was adding 1,000 jobs in Flint to build a new generation of heavy-duty pickup trucks. GM did not say that the latest investment would add more jobs at the plant, but Reuss said there could be opportunities to add workers as the launch of the automaker's new trucks progresses. GM has been under pressure from President Donald Trump and lawmakers of both parties to add jobs in the United States after it said last November it would idle the Chevy Cruze assembly plant in Lordstown, Ohio, and likewise had no new products for three other U.S. manufacturing plants. The Flint investment will include upgrades to the plant's conveyors and other new tooling, and will be completed in the first half of 2020. GM has invested more than $1.6 billion in the plant since 2013. Last month, GM said it would invest $24 million to increase truck production at its assembly plant in Fort Wayne, Indiana, which makes Chevrolet Silverado and GMC Sierra models. Sales of heavy-duty pickups in the United States have grown to more than 600,000 vehicles a year, up more than 20 percent since 2013, according to industry data. Prices for luxury models can easily top $70,000. GM's Chevrolet and GMC brands have long trailed Ford's F-series heavy duty trucks in the lucrative segment. The new Chevrolet and GMC heavy duty trucks have been re-engineered to tow heavier trailers, and keep pace in what has become an arms race among the Detroit Three automakers to claim superior torque and towing capability. Related: Silverado HD vs. 2019 Ram, Ford heavy duty trucks: How they compare on paper