11 Heated Leather On Star Sunroof Tint Running Boards Rear Defrost Flex Fuel on 2040-cars

Auto blog

Here’s how 20 popular EVs fared in cold-weather testing in Norway

Electric vehicles are known to suffer diminished performance in cold weather, but some do a better job than others hanging onto their range capacity while cabin heaters and frigid outdoor temperatures sap power from their batteries. Recently, the Norwegian Automobile Federation put the 20 of the best-selling battery-electric vehicles in the country to the test, to see not only how winter weather affected their range but also their charging times. The major findings: On average, electric vehicles lost 18.5% of their official driving range as determined by the European WLTP cycle. Electric vehicles also charge more slowly in cold temperatures. And interestingly, the researchers learned that EVs don’t simply shut down when they lose power but instead deliver a series of warnings to the driver, with driving comfort and speed levels maintained until the very last few miles. Because itÂ’s Norway, the worldÂ’s top market for electric and plug-in hybrid vehicles by market share, the test included many EVs that arenÂ’t available here in the U.S. But there are many familiar faces, among them the Nissan Leaf, Tesla Models S, 3 and X, Hyundai Kona (known here as the Kona Electric) and Ioniq, and Audi E-Tron. In terms of range, the top-performing EV was the Hyundai Kona, which lost only 9% of its official range, which the WTLP rated at 449 kilometers, or 279 miles, compared to its EPA-rated range of 258 miles on a full charge. It delivered 405 km, just enough to nudge it ahead of the Tesla Model 3, which returned 404 km. Other top performers included the Audi E-Tron, in both its 50 Quattro (13% lower range) and higher-powered 55 Quattro (14% lower) guises; the Hyundai Ioniq (10% lower); and Volkswagen e-Golf (11% lower). At 610 km (379 miles) the Tesla Model S has the longest WLTP range of all models tested and went the furthest, but still lost 23% of its range, though it also encountered energy-sapping heavy snow at the end of its test, when many cars had dropped out. The Model 3 lost 28% of its range. The worst performer? That goes to the Opel Ampera-e, better known stateside as the Chevrolet Bolt. It traveled 297 km (about 184 miles) in the test, which was nearly 30% lower than its stated WLTP range. We should also note that Opel, now owned by Groupe PSA, is phasing the car out in Europe and that Chevy recently upgraded the Bolt here in the U.S.

Chevy's 6.6-liter Duramax is pretty much all new

To say there's a heated battle in heavy-duty pickups is an understatement, with Chevrolet, Ford, and Ram constantly trading blows of increased torque, horsepower, and towing capacity. The latest salvo is the revised, more powerful turbo diesel 6.6-liter Duramax V8 in the 2017 Chevy Silverado. It has 910 pound-feet of torque, an increase of 145, putting it nearly level with the Ford Super Duty. Here's a closer look at where those gains come from. How exactly did Chevrolet add all that torque plus 48 horsepower? The automaker essentially took a fine-tooth comb to the entire engine. Chevy says it changed 90 percent of the V8, and the cumulative effect of those small changes adds up to big increases. As you might guess, the turbocharger is updated. The larger unit features electric actuation of the variable nozzle turbine (VNT), and what Chevy calls a double axle cartridge mechanism that separates the VNT moving parts from the housing. That helps with heat performance as well, with a claim that the exhaust side of the turbo can run continuously up to 1,436 degrees Fahrenheit. Helping that cause are six exhaust gaskets made of Inconel - an nickel alloy that contains chromium and iron – and upgraded stainless steel for the exhaust manifold. Despite having the same cast iron cylinder block, albeit with some minor enhancements, the engine has new cylinder heads, pistons, piston pins, connecting rods, and crankshaft, which have all been upgraded to handle 20 percent higher cylinder pressures. Alongside the increase in pressure, Chevrolet also increased the cylinder head's structure with a honeycomb design. The pattern features high-strength aluminum with dual layer water jackets that not only improve strength, but also optimize water flow for better cooling. For 2017, the cylinder head also benefits from integrated plenum that aids the engine in getting more air under heavy loads. The cylinder head isn't the only component to get a minor update, as the pistons have a larger diameter pin for improved oil flow. The same detailed improvements has been bestowed to the humble connecting rods (second in our hearts only to the inanimate carbon rod). The new design has the bolts oriented roughly 45-degrees to the rod instead of parallel. The angle split design, as it's called allows for easier passage through the cylinder.

2016 Chevy Camaro to drop 200 pounds

The sixth-generation Chevrolet Camaro makes its grand debut on May 16 at a big celebration on Detroit's Belle Isle. Until then, Chevy's strategy seems to be showing off the pony car's new components piece by piece. With the exhaust headers and front end already on display, the Bowtie is now giving a glimpse at some of the upcoming model's aluminum components. The Camaro is going on a diet for its latest generation, and Chevy claims that the switch to the Alpha platform and other new components shed over 200 pounds compared to the current model. That will put the pony car at around 3,500 pounds. The lower weight will contributes to better fuel economy, quicker acceleration and more direct handling, according to the automaker. Among the changes are aluminum front and rear suspension assemblies (pictured above) that weigh 21 percent less than the current units. Also, Chevy promises in its announcement "links on some models feature an intricate, structurally optimized design made with a rigid composite material that's even lighter than aluminum." In addition to these improved parts, the Camaro uses the lightweight metal for the beam that supports the instrument panel to save 9.7 pounds more. The only two pieces reportedly carrying over to the latest design are Chevy's bowtie and SS badges, and at least one engine in the range is known to be a version of the 6.2-liter LT1 V8. With over a month until the next Camaro's debut, we might get a glimpse of even more of the car's new parts in the coming weeks. Related Video: 2016 Camaro Does More with Less New model is at least 200 pounds lighter than current car 2015-03-30 DETROIT – For the all-new, 2016 Chevrolet Camaro, the team was challenged to improve the handling, acceleration and fuel economy of the award-winning current model. To meet all three objectives, the team focused on a singular mission: reduce mass. By obsessively searching for opportunities to save ounces, the team pared more than 200 pounds off the Camaro compared with the fifth-generation model. As a result, the Camaro does more with less, according to Al Oppenheiser, Camaro chief engineer: "We kept the cornering confidence and control that make the Gen 5 Camaro 1LE so fun to drive, and added a greater sense of agility," he said. "The new Camaro brakes harder, flicks into corners more quickly, and drives out of the corner faster.