1993 Chevrolet Starcraft High Top Conversion Van With 33,134 Miles!! G20 Express on 2040-cars

Auto blog

GM recalls nearly 1 million vehicles for airbag defect

WASHINGTON — General Motors said on Friday it will recall nearly 1 million sport utility vehicles in the United States because the driver's airbag inflator may explode during deployment. The recall covers 994,763 Buick Enclave, Chevrolet Traverse, and GMC Acadia vehicles from the 2014 through 2017 model years with modules produced by ARC Automotive Inc. Dealers will replace the driver's airbag module. The National Highway Traffic Safety Administration said a driver in Michigan of a 2017 Chevrolet Traverse was in a crash in which the front-driver airbag inflator ruptured during deployment causing facial injuries. An April 25 inspection confirmed that the front driver airbag inflator ruptured in the vehicle. The National Highway Traffic Safety Administration (NHTSA) demanded the recall of 67 million air bag inflators because it believes there is a safety defect, but auto supplier ARC Automotive Inc rejected the U.S. regulator's request, documents released on Friday show. The auto safety agency said the inflators pose an unreasonable risk of death or injury. Even as ruptures mount, "ARC has not made a defect determination that would require a recall of this population," NHTSA said in its demand letter to the Tennessee-based company. "Air bag inflators that project metal fragments into vehicle occupants, rather than properly inflating the attached air bag, create an unreasonable risk of death and injury." GM said it was still investigating the issue with the assistance of a third-party engineering firm. "GM is taking this expanded field action out of an abundance of caution and with the safety of our customers as our highest priority," the Detroit automaker said. GM said it was aware of two prior ruptures of ARC-manufactured airbag inflators in 2015 Chevrolet Traverse vehicles, and GM conducted two earlier small recalls of about 3,000 ARC inflators. All three rupture events in Chevrolet Traverse vehicles involved the same inflator variant. ARC noted in a letter made public Friday that no root cause for those ruptures has been identified by ARC or GM. ARC said it was assessing the scope of GMÂ’s recall.  Government/Legal Recalls Buick Chevrolet GMC Safety Crossover SUV

Callaway rolls out radical Corvette C7 GT3-R at Hockenheim

Leave it to Callaway to take a badass Corvette and make it even more so. Case in point: the new Callaway Corvette C7 GT3-R you see here. It made its big debut this past weekend during the season finale for the ADAC GT Masters series at the legendary Hockenheimring – the on-again, off-again home of the German Grand Prix. Why in Germany, you ask? Because that's where Callaway Competition is based. The racing division got its start in Heilbronn as Woeher & Ciccone back in 1985. It joined with US-based Callaway Cars in 1988 to distribute its modified Corvettes in Europe, and branched out into constructing racing cars in 1994. And this is its latest project. Designed in partnership between Callaway Competition in Germany and Canadian designer Paul Deutschman, the new GT3-R replaces the previous C6-based Z06.R GT3. It packs a 6.2-liter V8 pumping 600 horsepower through an X-Trac six-speed sequential gearbox. And as you can see, it sure looks the part. Callaway will be offering the new GT3-R to privateer teams for entry in a variety of racing series around the world. But it'll also be fielding the example you see here, sponsored by Whelen Engineering that – like Callaway Cars – is based in Connecticut. Callaway Corvette C7 GT3-R World Debut at Hockenheim October 3, 2015 Hockenheim, Germany – October 3, 2015 – This weekend's ADAC GT Masters Season Finale was the backdrop for the unveiling of Callaway Competition's new Callaway Corvette C7 GT3-R. Following a brief presentation to media and invited guests, the successor of the C6-based Callaway Z06.R GT3 was displayed to the public for the first time on October 3, 2015 at the Hockenheimring in Germany. Constructors of GT race cars since 1990 and based in Leingarten Germany, Callaway Competition possesses a wealth of experience, technical know-how and a broad network of specialized professional partners. These elements were crucial to conduct such a large undertaking. After nearly two years of comprehensive planning, intensive development and expert fabrication of vehicle components, Callaway Competition completed the first C7 GT3-R just a few weeks ago. Its striking design comes as a result of the collaboration between Canadian designer Paul Deutschman and team owners Giovanni Ciccone and Ernst Wohr. Mike Gramke, Uwe Hoffmann, Florian Mohring and Andre Zanke were also heavily involved in the vehicle's development.

Detroit 3 to implement delayed unified towing standards for 2015

Car buyers have a responsibility to be well-informed consumers. That's not always a very simple task, but some guidelines are self-evident. If you live in a very snowy climate, you generally know a Ford Mustang or Chevrolet Camaro might not be as viable a vehicle choice as an all-wheel drive Explorer or Traverse, for example. If you want a fuel-efficient car, it's generally a good idea to know the difference between a diesel and a hybrid. But what if it's kind of tough to be an informed consumer? What if the information you need is more difficult to come by, or worse, based on different standards for each vehicle? Well, in that case, you might be a truck shopper. For years, customers of light-duty pickups have had to suffer through different ratings of towing capacities for each brand. For 2015 model year trucks, though, that will no longer be a problem. According to Automotive News, General Motors, Ford and Chrysler Group have announced that starting with next year's models, a common standard will be used to measure towing capacity. The Detroit Three will join Toyota, which adopted the Society of Automotive Engineers' so-called SAE J2807 standards way back in 2011. The standard was originally supposed to be in place for MY2013, but concerns that it would lower the overall stated capacity for trucks led Detroit automakers to pass. Ford originally passed, claiming it'd wait until its new F-150 was launched to adopt the new standards, leading GM and Ram to follow suit. Nissan, meanwhile, has said it will adopt the new standards as its vehicles are updated, meaning the company's next-generation Titan should adhere to the same tow ratings as its competitors. While the adoption of SAE J2807 will be helpful for light-duty customers, those interested in bigger trucks will still be left with differing standards. There is no sign of the new tow standards being adopted for the heavy-duty market.