Equipped With 1100 Lb Capacity Lift Gate And Tie Down System, Rare! on 2040-cars

Auto blog

EV tax credits: Here's every electric car or plug-in hybrid that qualifies

Starting on April 18, the Internal Revenue Service released new guidance for U.S. buyers shopping for a new electric or plug-in hybrid vehicle. On April 18th, the IRS showed only six fully electric vehicles on the qualified list, but a day later Volkswagen confirmed its U.S.-built ID.4 also qualifies. That means right now, seven fully electric vehicles qualify for the full $7,500 EV tax credit, with three more from Chevrolet coming for the 2024 model year (we would expect these 2024 models to roll out slowly and be difficult to find for at least the first few months they are on the market). In addition to those seven fully electric cars, two plug-in hybrids also qualify for the full $7,500 credit. To qualify, a vehicle must be assembled in North America and must meet a strict set of guidelines that cover where battery materials were sourced. If any battery materials come from certain countries (importantly including China), the vehicle's tax credit is automatically cut in half. Further, according to the IRS, the vehicle's manufacturer suggested retail price (MSRP) can't exceed $80,000 for vans, sport utility vehicles and pickup trucks or $55,000 for any other type of vehicle (basically meaning sedans). Electric vehicles that qualify for the full $7,500 EV tax credit: Cadillac Lyriq (2023-2024) Chevrolet Blazer EV (2024) Chevrolet Bolt EV (2023-2024) Chevrolet Bolt EUV (2023-2024) Chevrolet Equinox (2024) Chevrolet Silverado (2024) Ford F-150 Lightning — all models (2022-2023) Tesla Model 3 Performance (2022-2023) Tesla Model Y — all models (2022-2023) Volkswagen ID.4 — U.S.-built models (2022-2023) Plug-in hybrid cars that qualify for the full $7,500 EV tax credit: Chrysler Pacifica PHEV (2022-2023) Lincoln Aviator Grand Touring (2022-2023) A smaller credit is offered on fully electric cars and plug-in hybrids that are assembled in North America but have batteries with materials sourced from unqualified countries (mostly China).

2017 Honda Ridgeline enters the landscape block war

In the test of pickup truck beds, if steel is apples and aluminum is oranges, Honda wants you to know that composites are pineapples. Chevy recently performed a test in which its own Silverado was pitted against its most obvious competitor, the Ford F-150. A loader dropped over 800 pounds of landscaping blocks into the two truck beds, and Ford's aluminum bed ended up with more damage than Chevy's steel bed. Check that test out right here. Honda apparently wasn't content to let Chevy throw stones alone. In a new test, the Japanese automaker replicated the block-drop test using its brand-new Ridgeline truck, which features a composite bed. As you'll see in the video above, there was very little damage to the high-strength plastic bed of the Ridgeline after a similar load of landscaping blocks were dropped from a loader. Without being on hand at any of these tests, we can't say with any degree of certainty that they match up in severity. But they all look pretty similar, and this is actually a test that Honda performed in front of journalists ( ourselves included) earlier this year. We visually inspected the composite bed of a Ridgeline after a demonstration just like the one on video above, and can confirm that there was basically no damage to Honda's truck. Chevy went an extra step by flinging a heavy toolbox into the Silverado and F-150; Honda didn't match that particular test. Does any of this matter? That's up to truck buyers and owners to decide, naturally, but we doubt anyone would actually dump a load like this into their own truck. And it's also worth noting that a heavy-duty spray-on bedliner would probably minimize damage to the metal surface below, whether steel or aluminum. If nothing else, it's memorable marketing. Related Video:

First 2015 Chevy Corvette Z06 engine blows up at just 891 miles

You've waited and watched and waited some more for the arrival of your 650-horsepower, $78,000 Chevrolet Corvette Z06. Finally, that joyous day arrives and you eagerly, but gingerly, begin to break-in the 6.2-liter supercharged V8 monster under your hood. Then 900-odd miles after delivery, your excitement grinds, quite literally, to a halt. That's what the owner of one 2015 Z06 claimed happened to him when a simple break-in drive resulted in a lunched engine. The owner, known as Lawdogg149 on Corvette Forum, says he was out breaking-in his car ahead of a January track event when it happened. "While making a pull from 35 miles per hour, I accelerated and shifted short of redline, and boom - the car began knocking. I pulled over and popped the hood. I could hear a loud knock coming from the No. 6 cylinder area along with a serious, grinding, metal-on-metal sound coming from the supercharger area," Lawdogg wrote. A subsequent trip to the dealer confirmed his concerns, with the service facility telling Lawdogg that the No. 6 valvetrain had failed. The dealer couldn't research the issue further, though, as General Motors requested the engine be returned for a more thorough evaluation. The good news for the Z06's unlucky owner, at least, is that GM will be covering the engine replacement under warranty, an expense that Corvette Forum estimates is a nearly $24,000 procedure. At this point, the two leading theories behind the engine's detonation involve a manufacturing defect – which could be why GM is so keen to tear the blown powerplant down – or a mistake on the part of Lawdogg. As Motor Authority points out, such an error could be something as simple as the Z06's owner accidentally shifting to first rather than third during his 35-mph pull. If, however, there's a deeper manufacturing problem with the Z06's engine, this might not be the only case we end up hearing about.