Priced To Sell This Cobalt Blue Black Interior With Bucket Seats 350 Small Block on 2040-cars

Auto blog

Bob Lutz builds the case for a mid-engined Corvette

Rumors of a mid-engine Corvette are like automotive industry folklore at this point. Every once in a while, news pops up that it might be happening or is under development, but nothing actually ever comes to fruition as something people can actually buy. The latest spy shots strongly suggest a mid-engine 'Vette is in the cards, yet again, possibly for 2018. Now, an op ed by former General Motors executive (and definite performance car fan) Bob Lutz in Road & Track gives the inside scoop on the history of one of these proposals and lays out how to make it happen today. According to Lutz, the company's engineers believed the C6 ZR1 was at the limit for front-engine, rear-wheel drive performance in that package, and the only solution was to move the powerplant behind the driver. Lutz even got then CEO Rick Wagoner on board. The scheme made it at least as far as clay models for mid-engine versions of the 'Vette and Cadillac XLR. Eventually, a lack of money got in the way, though, bringing the project to an end. Lutz puts a lot of faith in GM's current leaders, especially Mary Barra and Mark Reuss. He thinks the chances of a mid-engine 'Vette happening this time are better than 50 percent. The model, rumored to be named Zora, could offer over 700 horsepower in an ultra lightweight body and be priced at about $120,000 to "suck the doors off everybody." Head over to Road & Track to get some insights from this highly respected and entertaining auto industry veteran. Related Video:

2016 Chevrolet Silverado 1500 Quick Spin [w/video]

The Silverado 1500 gets what most would consider an early update for 2016. Just two years into this generation, the half-ton Chevy truck has been given a visual overhaul and a handful of feature upgrades. Chevy reps say they didn't wait the usual three years for a refresh because they knew the domestic competitors were planning updates of their own for 2015. We're told the fast refresh was always in the plans, and that it wasn't a response to critics (like us) saying "meh" to the new truck's design, which some felt hewed too close to the GMT900s that came before. If a Ford grille that reaches halfway into the headlights is good, a Chevy grille that cuts the units clean in two must be better. That's at least how we imagine the designers' thought process went. Those new split lights use HID projectors on lower models and full-LED tech on the upper trims, with all versions getting LED daytime running lights. LED taillights are also included on the fancier models. <p>Your browser does not support iframes.</p> Each of the eight trim levels has its own look, and the differentiation goes beyond the placement of chrome and the color of cladding. Look closely and you'll see that elements of the various grille treatments are repeated within the headlights. It's a neat touch, and proof that attention to detail is still a thing. Chevy also reshaped the hood, with sharp lines and pockets that look like they'll do a great job of collecting snow come winter. We get why a Corvette has troughs in its hood (you know where the wheels are and see through the valley to the road) but the surfacing on the Silverado's engine hat has only aesthetic benefits. On the feature front, almost all 2016 Silverado models get standard Apple CarPlay and Android Auto support; the 7.0-inch screen includes both, while the available 8.0-inch screen will add Android Auto through an update in March of 2016. The top High Country trim gets new power-articulating side steps as an option. In addition to swinging down to help you hoist yourself in through the door, the steps have a button at the rear that, when pressed, motors them down and rearward to give you a foothold at the front of the bed. Chevy also catches up to the competition with an available remote-locking tailgate. Chevy also gets further into the competitive numbers game for 2016 with expanded use of its eight-speed truck transmission.

Meet Alex Archer, the engineer behind GM's power-sliding center console

In 2009, a GM manager complained to a 59-year-old GM technician about the hassle of retrieving items from a pickup truck bed after driving shifted the cargo. In two days, the tech had come up with the ideas that, ten years later, would debut as the MultiPro tailgate. The engineering teams kept the tailgate secret in part by hiding mock-ups in a locked storage closet in GM's Vehicle Engineering Center in Warren Michigan for two years. A piece in the Detroit Free Press reveals that another storage closet in Warren would play the same role in a different cloak-and-dagger operation, this time for the power-sliding center console in GM's new full-sized SUVs. During a meeting in early 2017, bosses gave the job of the console's creation to 24-year-old design release engineer Alex Archer, just two years out of Stanford University with a degree in engineering and product design.  This time, the catalyst for the feature was an internal GM think tank called co:lab, where employees suggest ideas. Execs gave Archer the task because "They needed someone willing to ask a lot of questions," her 36-month mandate to produce a six-way console that could be a standard cubby or a gaping maw able to swallow four gallon jugs or hide a secret compartment. Clearly, she succeeded. It took Archer and the team nine months to devise a prototype, another six months to get the green light for production. As with the tailgate, the team working on the console grew to include designers, production engineers, and suppliers. Archer, now 26, shepherded the process, and her name is on the patent. "It took a ton of people, I'm just somebody who stuck with it the whole time," she said. GM like her work well enough to produce the "Day in the Life" segment above, five months before the world would hear about the console. Archer's path to engineering was as unlikely as getting the job for the console. She had entered Stanford with plans to be a doctor. But an innovation class during her freshman year, and a sophomore summer spent helping her grandfather rebuild a 1937 MG engine recharted her course. Her grandfather told her, "You know, you could be an engineer for a car company." Consumer reaction to Archer's work won't be far off, the SUVs slated to hit dealerships soon. Meanwhile, she's busy on something that could be just as intense as the console: Restoring a 1955 Packard Clipper in her garage. Head to Freep to check out the story of Archer and the console. Related Video: