2002 Custom Z06 Corvette on 2040-cars

Auto blog

2020 Chevy Silverado HD vs. 2019 Ram, Ford heavy duty trucks: How they compare on paper

Last year was all about the latest in light-duty full-size pickup trucks, so this year, Ram, Ford and Chevy are launching the heavy-duty variants. The first out of the gate is the redesigned 2019 Ram 2500 and 3500 HD, and Ram dropped all the pertinent specs with the reveal. Chevy followed with the new Silverado HD in Chicago, and Ford revealed updates to the Super Duty at the same show. Ford hasn't released details on output, payload capacity, towing capacity or pricing for the updated Super Duty. As such, we'll be comparing the current Super Duty with the all-new Silverado HD and Ram HD. Both Chevy and Ram have revealed full specs for each of their respective trucks, leaving out only pricing, which we've estimated based on the outgoing models. You can see the raw details in the chart below, followed by extra information and analysis. Some things to keep in mind: These specifications cover all versions of the Ram HD, Silverado HD and Super Duty, such as 2500 and 3500 models, and all the way up to F-450. Specifications can vary widely based on engine, drivetrain, cab and bed configurations, so be sure to take a close look at the specific model you're interested in when you get particularly serious about buying. And of course, be sure to check out our car comparison tool if you'd like to look at other trucks on the market. Engines and drivetrains All three of these trucks offer gasoline and diesel engines, but only the Ram has two versions of the diesel. Starting with gas engines, Ram's 6.4-liter V8 has the power advantage with 25 more horsepower than the next-most-potent Super Duty, but the new Silverado HD's 6.6-liter V8 takes the torque crown at 464 pound-feet, nearly 35 more than the other two gas engines. The Ram is also the only one to pair an eight-speed automatic with the gas engine, whereas the Ford and Chevy make do with a six-speed. With diesel engines, horsepower is a weak point for the Ram. The Ram's entry-level turbo 6.7-liter inline-six is the weakest, as the only one with under 900 pound-feet of torque and under 400 horsepower. Even the high-output version only makes 400 horsepower, while the Chevy makes 445 and the Ford 450. But the tables turn with torque, as the Ram makes a best-in-class 1,000 pound-feet followed by the Ford's 935 and the Chevy's 910. Both the Ram and the current Super Duty diesels each get a six-speed automatic, but the new Silverado HD's diesel gets a 10-speed unit.

How easy is it to rebuild a Chevy small block V8?

Chevrolet's famous small block V8 stands as one of the workhorse engines in American auto history, with its variants going into vehicles from hot rods to pickup trucks. But do you know that you can fully disassemble and completely restore one of these mills in just under four minutes? Well, as long as there's some assistance from time-lapse photography, that is. Hagerty created this short clip showing a dirt-covered small block turning from a frog into a prince. Thankfully, the time-lapse doesn't speed the process up too much, and it's still easy to see how all of the principal parts fit together. With all sorts of sensors and software helping to drive the modern automobile, viewing the internal combustion engine in its purely mechanical form is still fascinating. Related Video:

Ringbrothers drops more hints about its wild SEMA creations

Ringbrothers isn't finished teasing its SEMA creations. First we got a sliver of rear quarter on a 1969 Chevrolet Camaro that revealed a bundle of carbon fiber and SEMA-obligatory deep-dish wheels. The Wisconsin tuner's now announced its litter of cars headed to the show and a few specs, along with two shadowy drawings. The Camaro, christened with the name Valkyrja and a two-tone paint job, gets stretched in two directions with severe fender flares to widen the body and an extended wheelbase. We're not sure what's happening with the Camaro's snout in the drawing, but under that bulging hood we'll find a 416-cubic-inch LS V8 from Wegner Motorsports. Wegner built the 416-cu-in supercharged LS3 V8 that powered Ringbrothers' 1,000-hp G-Code Camaro in 2016.  The second member of the gang is a 1969 Ford Mustang Mach 1 dubbed Unkl. The exterior begs for attention with a deep blue sea paint job, deep front chin spoiler, bulging hood, yellow brake calipers, and what looks like a racing number inside a roundel on the doors. Unkl gets its motivation from a 520-cu-in Boss V8 built by Kaase Racing Engines, rumored to throw about 800 hp.    Finally, Ringbrothers is bringing its Cadillac Madam V for another Las Vegas go-round after giving the custom coupe some updates. The Madam V is a 1948 Cadillac Series 62 fastback coupe body placed atop an ATS-V chassis, first shown in 2016. The firm didn't elaborate on the changes, so all we can expect for now are the coupe's postwar good looks mixed with new-millennium engineering, and a 3.6-liter twin-turbo V6 with 464 hp under that exceptionally long hood.    For any in attendance at the show, the Valkyrja Camaro debuts at the BASF booth on Tuesday, Nov. 5, 2019 at 9:30 a.m., the Unkl Mustang gets revealed a couple hours later at the Flowmaster/Holley booth, and the Madam V Cadillac will be on display throughout the show at the Ringbrothers booth.