2001 Chevrolet Corvette Convertible 2-door 5.7l 57k Miles (mint) on 2040-cars

Auto blog

Jeff Gordon to pace Indy 500 in Corvette Z06

The Chevrolet Corvette has served as pace car for the Indianapolis 500 more than any other vehicle in the century-long history of the race. And this year it'll be at the front of the pack again in the form of the Corvette Z06 driven by Jeff Gordon. With 650 horsepower on tap, the Z06 is among the fastest, most powerful cars ever to serve as pace car for the Greatest Spectacle in Racing – right up there, at any rate, with the ZR1 that led the field in 2012 and the Viper GTS from 1996. For this year's race, it's been decked out in white with special graphics, strobe lights and a red interior. The 99th running of the race will mark the 13th time a Corvette has been tapped for the honor. Gordon, a name better known to NASCAR fans, but certainly no stranger to the track, will handle driving duties. The four-time Sprint Cup champion has won the Brickyard 400 no less than five times, including the very first time it was held back in '94. No driver has won at Indy more than Gordon – a record he shares with Michael Schumacher, who won the US Grand Prix there five times. (AJ Foyt, Al Unser and Rick Mears share the record for Indy 500 victories at four apiece, in case you were wondering.) It'll be a busy Sunday for Gordon, who will also be competing in the Coca-Cola 600 at Charlotte on the same day. Jeff Gordon to Drive Corvette Z06 Indy 500 Pace Car Five-time Brickyard winner will lead pack for 99th running of the Indianapolis 500 2015-04-29 INDIANAPOLIS – Five-time Brickyard 400 winner and four-time NASCAR Sprint Cup champion Jeff Gordon will drive a Corvette Z06 pace car for the 99th running of the Indianapolis 500 mile race, May 24 at the Indianapolis Motor Speedway. It is the 13th time a Corvette has served as the official pace car, dating to 1978, and the 26th time a Chevrolet has led the pack for "The Greatest Spectacle in Racing." Corvette has served as the pace car more than any other vehicle in the race's history. Gordon, who grew up in nearby Pittsboro, Ind., is no stranger to the Indianapolis Motor Speedway. In 1994 he won the inaugural Brickyard 400 – the first-ever NASCAR race at the Brickyard, and has visited the winner's circle there four more times. That makes him one of only two five-time winners at Indy in any series. Michael Schumacher won five Formula One races there. "It's great to have Jeff Gordon serve as this year's pace car driver," said Jim Campbell, Chevrolet U.S. vice president of performance vehicles and motorsports.

Driving Granatelli's turbine-powered 1978 Chevy Corvette [w/video]

With its curvy snout and feminine haunches, the third-gen Chevrolet Corvette looks like a dreamy – if dated – exemplar of Sports Car Fantasy 101 when viewed through modern eyes. This particular specimen circa '78, clad in silver and black paint with red pinstripes, appears to be a well-preserved example from the era. Apart from its low-profile Pirellis, slightly raised and slotted hood, spacious stance and a certain hand-painted descriptor alongside its crossed flag logos, you'd never guess there's a Space-Age propulsion unit powering this Coke bottle-bodied ride. Climb inside, and you're presented with aircraft gauges and big, colorful square buttons in the center panel. It takes a push of the "Ignitor" button, a tap of the starter button, and a slide of a T-handle for this nearly 40-year-old sports car to start sounding like Gulfstream G650 ready for takeoff. Yep, you're sitting in an 880-horsepower, turbine-powered Corvette, the only one of its kind in the world. Welcome to the whoosh. What The...? Built by Vince Granatelli, son of Indy 500 guru Andy Granatelli, this curious Corvette came into being by cramming a Pratt & Whitney ST6N-74 gas turbine engine into the donor car's lengthy front end. The same type of Jet A-burning mill powered Granatelli Senior's STP-sponsored racecar at the 1967 Indianapolis 500, where it famously led most of the 198 of 200 laps until a $6 transmission bearing failed, knocking it out of the race. The idea of turbine power usurping internal combustion was so threatening that Indy's governing body restricted turbine performance into obsolescence thereafter. A turbine-powered Corvette sounds excessive because it is. But there are also things about this 880-horsepower, 1,161-pound-feet monster that might surprise you. While it smacks of futurist exoticism and cost a then-dizzying $37,000 in 1967, the Canadian-built powerplant uses 80 percent fewer parts than an internal combustion V8 and will run on virtually anything combustible – whiskey, diesel, even Chanel No. 5. Though it's triple the length of a V8, the Pratt & Whitney beast weighs only 285 pounds. It's also one hell of a robust workhorse, typically serving as an auxiliary power unit for commercial aircraft or a generator in oil fields, where it can run for tens of thousands of consecutive hours before needing an overhaul. To adapt the Chevrolet for jet duty, the nose section was gutted and a sub-frame was built to compensate for the loosey-goosey front end.

GM patent reveals new two-stage turbocharger

Modern turbochargers may be some of the best ever made, but performance is something that engineers are always trying to improve. According to GM Inside News, General Motors (GM) is hoping to alleviate some of the negative aspects of a two-stage turbocharger setup with a newly-patented design. The patent, that was filed on May 19, 2016, reveals a clever bypass system that allows the engine, a four-cylinder unit, to optimize both the low-pressure and high-pressure inlets for its respective functions. According to the filing, a conventional two-stage turbocharger setup is engineered to allow both turbines to operate simultaneously at low and mid engine speeds. At high engine speeds, only the low-pressure turbine works. The setup can't isolate either the low or high pressure side, which can impair low-end performance. GM's new two-stage turbocharger setup looks to eliminate this by linking the high-pressure turbo to the exhaust manifold through the high-pressure inlet duct. The low-pressure turbo is attached to the high-pressure turbo by a low-pressure inlet duct, which is linked to a connecting channel. A single actuator that is housed in the exhaust manifold creates a bypass that can opens the high-pressure inlet or close the connecting channel. Depending on what the engine load and speed is, the ECU guides the actuator—a single rotating spindle with discs corresponding to flanges on the high and low pressure sides—to isolate one of the two turbos. Isolating the turbos allow the respective inlets to be engineered for the best possible fluid dynamic performance. The setup should increase performance and decrease lag. There's no word on what car this setup will make an appearance on, but it will most likely be used in premium vehicles before trickling down to the rest of GM's vehicles. Related Video: News Source: GM Inside News, AutoGuide via GM Authority Cadillac Chevrolet GM Technology Sedan turbo patent engine turbocharging