Long Bed. Mild Custom With 400 Small Block And Factory Ac on 2040-cars

Auto blog

2016 Chevy Cruze is lighter, loaded [UPDATE]

UPDATE: Live photos and video of the reveal have been added at the end of the story. Chevrolet revealed the second-generation Cruze Wednesday, promising a larger, more efficient car that drives better than the sedan it replaces. We're particularly excited about the new turbocharged, 1.4-liter four-cylinder engine, which makes 153 horsepower, an upgrade from the outgoing 1.8-liter naturally aspirated engine's 138 hp. Torque climbs even more significantly, from 148 pound-feet to 177 in the new mill. Peak twist can be called up between 2,000 and 4,000 rpm, which should make performance easy to access. Combined with a lighter architecture that slashes the Cruze's curb weight by 250 pounds (although the actual curb weight hasn't been released), the new four-door can hit 60 miles per hour in a respectable eight seconds. That's not hot hatchback territory, but it should be more than suitable for the average consumer. That same consumer should also appreciate the new engine's economy. The Cruze now returns an even 40 miles per gallon on the highway and will cover 530 miles on a single tank, all the while running on plain old 87-octane fuel. There's also a diesel-powered Cruze model, although Chevy didn't release specific details, aside from saying that it will arrive in dealers in 2017, over a year after the gas-powered model's early 2016 on-sale date. Despite the 250-pound drop in weight, the new Cruze has grown significantly. Its wheelbase is now the longest in the segment, with 106.3 inches of sheetmetal between the front and rear axles compared to 105.7 in last year's model, while the sleek new body cuts the coefficient of drag to just 0.29. The overall length increases from 181 inches to 183.7, though the new model is nearly an inch lower overall. That's both good news and bad news for interior space. Rear legroom is up from 35.4 to 36.1, but headroom is down in both the front and backseats by over half an inch. Tech fans, meanwhile, will appreciate the new standard MyLink display. The seven-inch touchscreen is compatible with both Android Auto and Apple CarPlay, while an optional eight-inch display will be offered, as well. 4G LTE wi-fi, heated rear seats, a heated steering wheel, and wireless phone charging will also be offered as an optional extras. New safety features include blind-spot monitoring with cross-traffic alert, lane keeping assist, and forward collision warning.

Our favorite mid-engine Corvette theories and rumors

The mid-engine Corvette! We just saw blurry photos through the foliage, and are hearts are all aflutter because it means that this car is real. And it's the most " never before" Corvette since 1984. Which leads us to all kinds of wacky theories and speculation. Everybody knows something or heard from a guy. None of those guys (or gals) from GM are talking to Autoblog, to be clear. But that won't stop us from stirring the pot. Let's go over a few point-by-point. The pushrod engine will be replaced by an overhead-cam V8 Car and Driver has repeatedly reported that an overhead-cam engine will come after the mid-engine Corvette's debut with an old-school pushrod. We've heard the same thing firsthand, albeit from a source with no connection to the development of the Corvette or powertrain. "At some point two valves can't pass future emissions regulations," said the guy we know. While the pushrod engine is compact, the design makes it difficult - if not impossible - for sophisticated variable valve timing (and lift) systems that control combustion with more precision. Hasty conclusion: The pushrod engine has a finite life in front of it. This one's a lock, it's a just a matter of when. Bowling Green's new paint shop is really the mid-engine assembly line Credit to Reddit for this one. Like we said, everybody knows a guy. But let's look deeper. The new paint facility costs $439 million dollars and adds 450,000 square feet, almost half the size of the existing plant. Plus GM announced another $290 million in upgrades at Bowling Green Assembly. That sure sounds like a lot of money, but you can actually spend that much on a paint booth. Porsche spent 500 million Euros (about $561 million dollars) to add the Macan assembly to its Leipzig, Germany plant in 2014. Chrysler shelled out $850 million for a paint shop in Sterling Heights, Michigan. GM spent $600 million for a new paint shop at the Fairfax (Kansas City) plant. Honda, on the other hand, is working on a thrifty $210 million project in Marysville, Ohio that includes a 300,000 square foot expansion, and the low-volume Acura NSX facility only cost $70 million. Hasty conclusion: The square footage and cost could easily mean a new assembly line instead of (or in addition to) a paint line. And if the NSX plant was really that cheap, GM could have hidden a similar sum in its existing announcements.

2016 Chevrolet Camaro: Everything we know so far [UPDATE]

UPDATE: We fully expect the floodgates to open as facts and photos leak throughout the day. Watch this space for more information as it breaks, including these leaked photos, and some new powertrain speculation. Chevrolet has made a grand production of teasing the all-new, sixth-generation Camaro. That slow trickle will become a deluge this weekend, when the 2016 model hits the stage on Detroit's Belle Isle as part of an all-day Camaro-palooza. Considering you're likely to hear plenty about the next-gen muscle car in the next couple days, we figured now is the perfect time to sort out all the facts and rumors we've heard about the next-generation coupe that's coming this weekend. Here's everything we know about Camaro Six. What Will It Look Like? Arguably the easiest Camaro question to answer after all the teasers and spy shots, General Motors' design team favored evolving the current car's retro design language while retaining the same basic shape. The long hood will carry on, joined by an even shorter, wing-topped rear deck, giving the 2016 an almost fastback-like look. The greenhouse is still slim, but lateral visibility may improve slightly owing to the larger quarter windows. We can only hope. The rear end looks to have been rounded, while Chevy's own teaser shows off larger, more prominent taillight housings than the simple rectangular lights on today's car. Expect quad-tipped exhausts to be offered on at least one version of the Camaro. Judging by the single teaser of the car's profile, the rear haunches will be larger and more chiseled. The muscular aluminum hood and its accompanying power bulge are more heavily styled than on today's car, although it looks largely similar in terms of size. It sits atop an even slimmer upper grille that's barely big enough for Chevy's Bowtie logo, with most of the visual mass moving to the gaping lower grille. One of the more tantalizing rumors surrounding the new Camaro focuses on its roof. As evidenced in a rather bizarre round of spy photos, it almost looks like Chevy is considering a removable panel, a la Corvette Stingray. T-tops are also a distinct (and more probable, we hope) possibility. The new shape will result in a more aerodynamic car, and Chevy claims the 2016 Camaro spent 350 hours in the wind tunnel. Overall lift has apparently been cut by 30 percent, thanks partially to a new, smooth underbody panel. Chevrolet has been far less forthcoming with information on the new Camaro's cabin.