1979 Chevolet K10 Cheyenne 4x4 Pick Up Truck 4 Speed Manual & 100% Rust Free on 2040-cars
Port Murray, New Jersey, United States
Body Type:Pickup Truck
Vehicle Title:Clear
Engine:350 cu inch
Fuel Type:Gasoline
Make: Chevrolet
Model: C/K Pickup 1500
Cab Type (For Trucks Only): Regular Cab
Trim: Cheyenne
Options: 4-Wheel Drive
Drive Type: 4 x 4
Power Options: Air Conditioning
Mileage: 135,000
Number of Cylinders: 8
Warranty: Vehicle does NOT have an existing warranty
|
1979 Chevrolet K10 Cheyenne 4x4 100% original and Rust Free this was a southern California truck now located in New Jersey. Original 350 V8 with 135K miles, this truck runs and drives excellent for it year. The only thing I found wrong with the truck is the air conditioner blows cool needs to be recharged, besides that everything works fine. The old owner told me that the truck was repainted several years ago due to its age, as you can see in the pictures no chips and a very clean exterior, if you have any questions call 908-689-3411. |
Chevrolet Cheyenne for Sale
1976 chevrolet c10 - new paint, new motor, custom wheels
1997 chevy cheyenne
1971 chevy cheyenne 3500 4x4 dually 454 auto power steering powerbrakes ac video
1972 cheyenne shortbed original paint- true time capsule- beautiful!(US $19,500.00)
1972 chevy c10 short wide fleetside pickup truck with a 5.3l and vortec 4l60e
1974 chevrolet cheyenne c-10 pickup 4x4 63,000 miles 1 previous owner no reserve
Auto Services in New Jersey
Tony`s Auto Service ★★★★★
T&T/PH Automotive Repair Spcl. ★★★★★
T & D Automotive Inc ★★★★★
Super Towing ★★★★★
Summit Auto Repair ★★★★★
Station Auto Repair ★★★★★
Auto blog
GM recalling 686k Lambda-platform models for hatch repair
Fri, Jul 10 2015General Motors is recalling 686,287 units of its Lambda platform crossovers. On models equipped with a power rear hatch the system can potentially fail. This campaign includes the 2008-2012 Buick Enclave, 2009-2012 Chevrolet Traverse, 2007-2012 GMC Acadia, and 2007-2010 Saturn Outlook. According to GM's documents to the National Highway Traffic Safety Administration (as a PDF), dirt can get into a portion of the strut that holds up the hatch and cause the part to prematurely fail. There's a redundancy in place called the Prop Rod Recovery system that's designed to shut the liftgate if there's a malfunction. However, if the breakdown happens too quickly after the hatch is opened the prop rod might not work the way it's supposed to. If someone were in the way of the falling liftgate, they could be hurt. For the repair, dealers will update the software for the power liftgate actuator motor control unit to prevent the hatch from closing so quickly. They'll also check the operation of the system afterward. Related Video: RECALL Subject : Liftgate Struts may Fail and Liftgate may Fall Report Receipt Date: JUN 30, 2015 NHTSA Campaign Number: 15V415000 Component(s): STRUCTURE Potential Number of Units Affected: 686,287 All Products Associated with this Recall Vehicle Make Model Model Year(s) BUICK ENCLAVE 2008-2012 CHEVROLET TRAVERSE 2009-2012 GMC ACADIA 2007-2012 SATURN OUTLOOK 2007-2010 Details Manufacturer: General Motors LLC SUMMARY: General Motors LLC (GM) is recalling certain model year 2008-2012 Buick Enclave vehicles manufactured January 3, 2007, to February 29, 2012, 2009-2012 Chevrolet Traverse vehicles manufactured July 6, 2008, to February 29, 2012, 2007-2012 GMC Acadia vehicles manufactured September 15, 2006, to February 29, 2012, and 2007-2010 Saturn Outlook vehicles manufactured August 17, 2006, to March 18, 2010. The affected vehicles, equipped with the power liftgate option, have gas struts that hold the power liftgate up when open. These struts may prematurely wear and the open liftgate may suddenly fall. CONSEQUENCE: If the open liftgate unexpectedly falls, it may strike a person, increasing their risk of injury. REMEDY: GM will notify owners, and dealers will update the software for the power liftgate actuator motor control unit so that the motor will prevent the rapid closing of the lift gate, free of charge. The manufacturer has not yet provided a notification schedule.
Dodge vs. Chevy tug-of-war taken to the extreme
Mon, 17 Dec 2012They say "idle hands are the devil's playground," but said playgrounds grow to Disney-sized proportions when a pair of jacked-up trucks, two egos, a chain and an empty mall parking lot are involved. Proof of this is the video below, which shows a Cummins-powered Dodge Ram circa 2006 to 2008 chained tail-to-tail with what looks to be a gasoline-powered Chevrolet Silverado from the late 1990s or early 2000s.
We don't necessarily have to tell you who wins this battle, but we'll let you see for yourself the lengths the "winning" driver goes to prove his point. There's plenty of foul language in the video below, so beware that this might be Not Safe For Work, and not that we should have to tell you, but please, do not try this at home.
GM patent reveals new two-stage turbocharger
Fri, Jun 24 2016Modern turbochargers may be some of the best ever made, but performance is something that engineers are always trying to improve. According to GM Inside News, General Motors (GM) is hoping to alleviate some of the negative aspects of a two-stage turbocharger setup with a newly-patented design. The patent, that was filed on May 19, 2016, reveals a clever bypass system that allows the engine, a four-cylinder unit, to optimize both the low-pressure and high-pressure inlets for its respective functions. According to the filing, a conventional two-stage turbocharger setup is engineered to allow both turbines to operate simultaneously at low and mid engine speeds. At high engine speeds, only the low-pressure turbine works. The setup can't isolate either the low or high pressure side, which can impair low-end performance. GM's new two-stage turbocharger setup looks to eliminate this by linking the high-pressure turbo to the exhaust manifold through the high-pressure inlet duct. The low-pressure turbo is attached to the high-pressure turbo by a low-pressure inlet duct, which is linked to a connecting channel. A single actuator that is housed in the exhaust manifold creates a bypass that can opens the high-pressure inlet or close the connecting channel. Depending on what the engine load and speed is, the ECU guides the actuator—a single rotating spindle with discs corresponding to flanges on the high and low pressure sides—to isolate one of the two turbos. Isolating the turbos allow the respective inlets to be engineered for the best possible fluid dynamic performance. The setup should increase performance and decrease lag. There's no word on what car this setup will make an appearance on, but it will most likely be used in premium vehicles before trickling down to the rest of GM's vehicles. Related Video: News Source: GM Inside News, AutoGuide via GM Authority Cadillac Chevrolet GM Technology Sedan turbo patent engine turbocharging
2040Cars.com © 2012-2025. All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.
Use of this Web site constitutes acceptance of the 2040Cars User Agreement and Privacy Policy.
0.034 s, 7940 u























