Find or Sell Used Cars, Trucks, and SUVs in USA

1970 Chevelle Ss #'s Matching Black W/ White Stripes! Great Combo on 2040-cars

Year:1970 Mileage:350 Color: Black /
 Black
Location:

Sterling Heights, Michigan, United States

Sterling Heights, Michigan, United States
Advertising:
Transmission:Automatic
Body Type:Coupe
Engine:396
Vehicle Title:Clear
Fuel Type:Gasoline
For Sale By:Private Seller
VIN: 136370A132135 Year: 1970
Interior Color: Black
Make: Chevrolet
Number of Cylinders: 8
Model: Chevelle
Trim: SS
Drive Type: RWD
Mileage: 350
Exterior Color: Black
Condition: Used: A vehicle is considered used if it has been registered and issued a title. Used vehicles have had at least one previous owner. The condition of the exterior, interior and engine can vary depending on the vehicle's history. See the seller's listing for full details and description of any imperfections. ... 

1970 Chevelle SS 396 #'s Matching motor and trans, original rear end and factory cowl induction hood. This car has been completely restored with under 400 miles on the restoration. This Chevelle went through a nut and boat restoration, the gaps and door fit are better than new. The car was stripped down and is all original sheet metal this was virtually a rust free car from the start. The paint and body are straight and solid, motor and trans have been completely rebuilt and run great! Interior is in great shape and rides as good as it looks. This is a great car that will turn heads anywhere it goes and sounds great with the big block 396. The black with white stripes is the original color scheme and have an amazing shine. The pain job was professionally done and have over $8,000 in just the paint job, over 45k into the restoration. Clear title in hand with no loans or liens. If you have any questions call Greg 586-854-8896...Thanks

Auto Services in Michigan

Welch Auto Parts Inc ★★★★★

Automobile Parts & Supplies, Automobile Parts & Supplies-Used & Rebuilt-Wholesale & Manufacturers, Used & Rebuilt Auto Parts
Address: 8711 Arkansaw Rd, Allen
Phone: (517) 869-2388

Wear Master ★★★★★

Auto Repair & Service, Automobile Parts & Supplies, Brake Repair
Address: 45449 Van Dyke Ave, Bruce
Phone: (586) 580-9011

Walsh`s Service ★★★★★

Auto Repair & Service
Address: 25639 W 7 Mile Rd, Ecorse
Phone: (313) 532-2823

Vehicle Accessories ★★★★★

Auto Repair & Service, Automobile Body Repairing & Painting, Automobile Parts & Supplies
Address: 2219 W Hill Rd, Grand-Blanc
Phone: (810) 232-2400

Tuffy Auto Service Centers ★★★★★

Auto Repair & Service, Brake Repair
Address: 3509 Owen Rd, Grand-Blanc
Phone: (810) 629-1600

Town And Country Auto Service Center LLC ★★★★★

Auto Repair & Service, Automobile Parts & Supplies, Auto Oil & Lube
Address: 6227 W Mount Hope Hwy, Leslie
Phone: (517) 580-0015

Auto blog

2021 Cadillac Escalade, GMC Yukon, Chevy Suburban/Tahoe recalled for stall risk

Mon, Oct 4 2021

General Motors is recalling just shy of 15,000 2021 Cadillac Escalade & Escalade ESVs, Chevrolet Suburbans and Tahoes, GMC Yukons and Yukon XLs that were shipped with fuel pumps that were built with a batch of what may be faulty electronic control modules. A pump with a bad module can result in intermittent function, resulting in drivability issues and potential stalls. No serious incidents or injuries have been associated with the issue.  GM says it discovered the issue after analyzing early recall data for the 2021 model SUVs and discovering an unusually high failure rate for fuel pumps manufactured by a single supplier – Vitesco. The company was able to identify the batch and initiate a recall campaign targeting just those vehicles.  "After reviewing the field data, GM determined there were 617 potentially relevant complaints, which were received between April 15, 2020 and August 24, 2021," the company's recall report said. "229 of these complaints reported a stall while standing or moving. No accidents or injuries associated with this condition were found." Any SUVs built with pumps from that batch but not yet sold are being held at dealers for replacement parts. It may take some time for GM to source replacements due to the ongoing electronic parts shortages.  "We are working with the supplier to obtain the required parts as quickly as possible," GM said in its notice to dealers. "When sufficient quantity of parts are available, the recall bulletin will be released and dealers can begin repairing vehicles."

Nissan Leaf sets another monthly sales record, Chevy Volt remains steady

Mon, Nov 3 2014

Here we go again. Another month in the books and another month of record sales by the Nissan Leaf in the US. For October, the world's best-selling pure EV sold 2,589 units, which is 29.3 percent more than October 2013. That makes it 20 times in a row that Nissan can say that last month sales were better than the same month a year before. All told, Nissan has sold 24,411 Leafs in the US this year, a new record, reflecting an overall Leaf sales rate that is up 35 percent, year-to-date. Nissan isn't stopping, either. A new TV ad, one that, "encourages consumers to kick gas" by saving money on fuel will start airing today in major markets, according to Toby Perry, director of Nissan's EV marketing. You can watch it below. As for the Chevy Volt, things remained steady last month in the face of a new model that's coming in the second half of 2015. Chevy sold 1,439 Volts last month, which is about the same as September (1,394) but down 28.8 percent from the October 2013 despite GM having its best overall US October sales this year since 2007. So far, 2014 Volt year-to-date sales are down 14.9 percent through the end of October compared to 2013. And that wraps up the flash report on monthly sales for these two long-standing plug-in vehicles in the US market. As always, we'll have our in-depth write-up of US green car sales available soon. For now, we await your comments, below. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

2016 Camaro gets most revealing tease yet

Mon, May 11 2015

Chevrolet started its long teaser campaign for the 2016 Camaro by just revealing the exhaust manifold and front frame, but as time has passed the company has slowly unveiled more. In the latest glimpse ahead of the pony car's May 16 debut, we're actually getting to see the model's profile completely undisguised. As suggested by the recent tease of the rear and hood, the 2016 Camaro wears a sharper, more angular design than the current model. This is especially the case when you look at the taut lines making up the rear. Chevy claims that the new shape underwent 350 hours of wind tunnel tests to be able to generate left lift, improve cooling and reduce wind noise in the cabin. A smooth underbody pan is among the aerodynamic tweaks, and it runs from underneath the front grille to the center of the Camaro. Chevy asserts that all of the changes at the front help reduce lift by 30 percent. Related VIdeo: 2016 Camaro is all about the Aero Total aerodynamic lift improved by 30 percent for improved stability 2015-05-11 DETROIT – After 350 hours of wind tunnel testing – often 24 hours a day – the new Camaro will slip more easily through the wind, and drivers of the Camaro SS will experience a marked improvement in reduced aerodynamic lift. These changes illustrate the lengths the aerodynamics team went to for improved performance, stability, cooling and lower wind noise intrusion "The importance of aerodynamics increases exponentially as we increase vehicle performance," said Kirk Bennion, Exterior Design manager. "As engine output increases, we need more engine cooling. As acceleration and top speeds climb, we need to reduce lift for better high-speed stability. However, we cannot make any changes at the expense of increasing drag, which can hurt fuel economy. "To balance these different aerodynamic targets, we tested literally hundreds of changes on the new Camaro, millimeters at a time." For example, the initial design called for the lower grille bars to be set at a 20-degree angle to the horizon. However, after meticulous testing, the team improved engine-cooling airflow by 1 percent by shifting the angle to 13 degrees – a change that achieved the airflow target while maintaining the original grille design. And rather than a traditional front air dam to reduce aerodynamic lift, the team developed a flush belly pan that stretches from the front grille to the center of the vehicle.