1969 Chevrolet Chevelle Convertible on 2040-cars

Auto blog

More 2017 Chevy Bolt powertrain details revealed

We've seen the production version of the Chevy Bolt electric vehicle. We've driven a prototype version. And now it's time to get some details about the powertrain. After the production version's reveal at CES last week, GM trotted out the Bolt EV for its Detroit debut this morning. The company brought with it a bunch of technical specifications. We'll start with the most important part of an EV: the battery. GM has put a 60-kWh lithium-ion battery that weighs just just 960 pounds into the floor of the Bolt. As previously announced, the Bolt's 288 cells will be able to go over 200 miles on a full charge. That full charge takes nine hours on a Level 2 EVSE thanks to the onboard 7.2-kW charger. Of course, a full charge won't be that important most days, which is why GM says that you can get 50 miles of range in "less than two hours" on Level 2. There's a SAE Combo DC fast charging option as well. The battery will have an eight-year/100,000-mile warranty. The Bolt will be able to sprint up to 60 miles per hour in "less than seven seconds" thanks to a 150-kW/200 horsepower motor in the Bolt. The motor is a new GM design that can produce up to 266 pound-feet of torque. The Bolt uses a shift-by-wire system and an, "offset gear and shaft configuration tailored to meet efficiency and performance targets." The Bolt EV's powertrain has a 7.05:1 final drive ratio. You can read all of the details direct from GM below. Related Video: Drive Unit and Battery at the Heart of Chevrolet Bolt EV Engineers focus on careful balance of range and performance DETROIT, Mich. – The 2017 Chevrolet Bolt EV does more than set a new benchmark for affordable, long-range EV driving. It also raises the bar when it comes to driving performance. Engineers developed the Bolt EV's propulsion system to offer more than an estimated 200 miles (based on GM estimates) and a delightful driving experience that's more akin to a compact sports sedan than a small utilitarian crossover. "Being the leader in range and affordability means nothing if the car isn't going to excite you each time you get behind the wheel," said Josh Tavel, Chevrolet Bolt EV chief engineer. "That's why the team was tasked with delivering a propulsion system that would also make the Bolt EV an electric vehicle that owners would love to drive." Single Motor Drive Unit Like most EVs on the road, the Bolt EV's drive system uses a single high capacity electric motor to propel the car.

Trucks and tidbits from GM's earnings report

General Motors announced this morning that 2018 was a good year for it financially, thanks in large part to the company's performance in North America, which was predicated, according to the company, on "strong pricing, surging crossover sales, successful execution of the company's full-size truck launch, growth of GM Financial earnings, and disciplined cost control." GM reported full-year income of $8.1 billion and EBIT-adjusted income of $11.8 billion. Crossover sales in 2018 were 1,034,808, an increase of 7 percent compared to 2017 deliveries. Throw in the body-on-frame SUVs and the ute number is a total 1,295,700. But let's face it: It is the trucks that really matter. The Chevy Silverado and Colorado, the GMC Sierra and Canyon. Altogether, GM sold 973,463 pickups in the U.S. in 2018. Although Ford gets bragging rights for F-Series sales, GM gets to point out that it has a greater aggregate number. An important factor regarding the trucks and the reported income is that during the last quarter, more than 90 percent of the new 2019 trucks were crew cabs (which have a higher sticker), and at GMC more than 70 percent were Denali and AT4 models (which have even higher stickers). According to reporting by Bloomberg, GM's pickup trucks combine for $65 billion in annual revenue. Clearly when the 2018 sales of the Silverado — 585,581— dwarf the combined sales of both Buick (206,863) and Cadillac combined (154,702), pickups are what matter to the overall health of the company in a way that it is difficult to otherwise achieve. The "disciplined cost control" is something that is very much in the public eye right now, as the company is taking out thousands of its workers, and there is still the "unallocated" plant situation and other plants that will remain under capacity. The numbers in GM's earnings report probably made Unifor members' heads explode in consternation, coming fresh off their Super Bowl ad: " GM, you may have forgotten our generosity, but we'll never forget your greed." But there are a couple of curiosities in the full GM earnings release. One is that so far as its autonomous efforts go, it mentions only that (1) in the first quarter of 2018 Cruise introduced a production-ready autonomous vehicle, and (2) Cruise attracted $5 billion in external capital from SoftBank and Honda. Not a whole lot of love for autonomy. Good thing they have the trucks to fund the program, to say nothing of the external capital.

Chevy's 6.6-liter Duramax is pretty much all new

To say there's a heated battle in heavy-duty pickups is an understatement, with Chevrolet, Ford, and Ram constantly trading blows of increased torque, horsepower, and towing capacity. The latest salvo is the revised, more powerful turbo diesel 6.6-liter Duramax V8 in the 2017 Chevy Silverado. It has 910 pound-feet of torque, an increase of 145, putting it nearly level with the Ford Super Duty. Here's a closer look at where those gains come from. How exactly did Chevrolet add all that torque plus 48 horsepower? The automaker essentially took a fine-tooth comb to the entire engine. Chevy says it changed 90 percent of the V8, and the cumulative effect of those small changes adds up to big increases. As you might guess, the turbocharger is updated. The larger unit features electric actuation of the variable nozzle turbine (VNT), and what Chevy calls a double axle cartridge mechanism that separates the VNT moving parts from the housing. That helps with heat performance as well, with a claim that the exhaust side of the turbo can run continuously up to 1,436 degrees Fahrenheit. Helping that cause are six exhaust gaskets made of Inconel - an nickel alloy that contains chromium and iron – and upgraded stainless steel for the exhaust manifold. Despite having the same cast iron cylinder block, albeit with some minor enhancements, the engine has new cylinder heads, pistons, piston pins, connecting rods, and crankshaft, which have all been upgraded to handle 20 percent higher cylinder pressures. Alongside the increase in pressure, Chevrolet also increased the cylinder head's structure with a honeycomb design. The pattern features high-strength aluminum with dual layer water jackets that not only improve strength, but also optimize water flow for better cooling. For 2017, the cylinder head also benefits from integrated plenum that aids the engine in getting more air under heavy loads. The cylinder head isn't the only component to get a minor update, as the pistons have a larger diameter pin for improved oil flow. The same detailed improvements has been bestowed to the humble connecting rods (second in our hearts only to the inanimate carbon rod). The new design has the bolts oriented roughly 45-degrees to the rod instead of parallel. The angle split design, as it's called allows for easier passage through the cylinder.